i want to read line by line in a files in C language actually my porblem is i have a one file cotains
if iam using fgets, it is reading each time AT only it does not moving to Ok in that file
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedI need a qtimer to trigger reading of a file line by line, I have the code sort of running with the timer trigger but qtimer will just read the first line over and over as it is now.
Here is the code so far:
self.lcdtimer = QTimer()
self.connect(self.pushButton85,SIGNAL("clicked()"),self.update)
self.connect(self.lcdtimer, SIGNAL("timeout()"), self.lcdxyz)
Code:
def lcdxyz(self):
import time
import os
[code]....
so I have a script that creates couple of txt files. First file output is something like below..
cn=test,ou=something,ou=some,o=org
cn=testa,ou=something,ou=some,o=org
cn=testb,ou=something,ou=some,o=org
second file output is something like below..
usera
userb
userc
Quote:
userdn=`ldapsearch -x -h $server -LLL "(objectclass=person)" dn | grep dn: | cut -d" " -f2 > userdn.txt
for i in $(cat userdn.txt);do
ldapsearch -h $server -p 389 -x -D $admid -w $admpwd -s one -b "$userdn" dn | grep dn: | cut -d" " -f2 | cut -d"=" -f2 | cut -d"," -f1 > user.txt
for i $(cat user.txt);do
echo "$userdn"
done
done
when I ran both ldapsearch commands invidually, they work fine. But when I ran script, I got first file correctly but not the second one. It looks like its not reading the first file correctly and not setting the variable ($userdn) value correctly in the second ldapseach command. I want read first file first line and run the second ldapsearch and continues, then read the second line..and so on.
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies View RelatedI just learn perl script.May i know how to simplify the code below especially in the red color part? i saw some examples in internet, they use "next" command.
View 20 Replies View RelatedCode:
#!/usr/bin/perl
use 5.10.0;
use strict;
use warnings;
use Net::Ping;
[code]....
have been playing around with a script for a few hours and now I need to be able to output the lines in a text file one by one to be used later in the script.What it gonna do is to read a log file and grep the usernames, then write them to a file, and then run one script for each user, to search for more information about them in the log.But I don't know how to output a single line from a file, and google does not return any solution.
View 3 Replies View Relatedi am trying to read in a file 1 line at a time and for some reason it stops printing out at about line 62,000.
i am doing this:
Code:
while(fgets(c0, 1085, fstream0) != NULL)
but after about 62,0000 lines it stops printing. no seg-fault, no core dump. it just stops printing to the terminal then returns me to the command line after a couple of minutes. as a hack i am doing split -l 50000 on the input and calling my program 5 times.is there some limitation on fgets that i am not understanding ?
I'm writing a program which now accepts user input:
Code:
echo "Enter a date in the format YYYY MM DD hh mm ss."
read gregyr gregmo gregdy greghr gregmn gregsc This lets the user input a date and time, such as 2011 06 21 15 12 45, and have each number assigned to their corresponding variable. Later in the program, these variables are put into an equation, and then the terminal spits out the answer. Now I have to have the program read all of the lines from a text file, which is in this format, assign the variables.
i want to read line by line in a files in C language actually my porblem is i have a one file cotains
AT
OK
if iam using fgets, it is reading each time AT only it does not moving to Ok in that file
I ran into it while google Segmentation Fault. I'm writing a simple C program that reads a file that counts each line and numbers it then writes to a file called sdout. I copyed my program mostly from the text book but im still having problems. Heres my code:
#include <stdio.h>
#include <stdlib.h>
void new_line(FILE *, FILE *);
int main(char *argv)
[Code]....
I created the following.
x="top
middle
bottom"
I would like to make the following work.
while read line
do
echo $line
done
instead of importing a file I would like to use the variable $x I tried using pipes, but with no luck. My goal is to read one line at a time, but not have to export my data to another file, I would like to keep it all within one script.
I've never programed shell scripting.
Code goes like so:
I simply want to read a file "data.txt" line by line Then char by char and add them into a result var. The file is supossed to always contain numeric values
I have a project due for my Intro to C++ class and we are suppose to generate a file listing that will take an input of a C++ source code with .cpp extension and make a copy of it with a .lst extention that will have a line number preceding each and every line.
View 12 Replies View RelatedI wish to add information to one of my files based on matching IDs,
Here is an example
(the id is the 3 colunm)
(the ID is the 2 colunm)
And the output i wish to be
OUTPUT:
So as you can see the ones that do not match are still present, and the ones that do match just have the extra information from file2.txt added to them.
I thought about using join but that only seems to join the ones that match displays thoes only. i would like all the information in the output file.
Was wondering if any perl guru's could help me with a quick log file adjustment. I have a text file that looks like so (tabs and newlines are revealed so you can see what separates the data):
There are maybe 100 lines of text in this file at any given time. I need to delete all duplicate lines only looking at the first bit of text prior to the first tab. It doesn't matter which one gets deleted as long as there are no two lines that begin with that same text at the beginning before the first tab. So in this example, either the fist line "1234" or the last line "1234" would need to be deleted. I already have code in my script that opens the files - I just need the code to read the text into an array and the part that would find matches based on the above criteria, and make the deletions.
If it would be easier, I can even do a system call and use SED (v4.1.5) and/or AWK (3.1.5) instead.
In C, I want to make a program that will take a file and replace it with a file that's nearly the same but with some minor changes. Also, I would like to point out that I'm still fairly much a beginner with C. As for an example of the file, I want to take something like this:
Code:
Random Crap
More Random Crap
Even More
Something That Changes XXXXX
[code]....
I figured the best way to go about doing this was to open the file and a blank file, read the original bit by bit and when it gets to the point that needs to be changed exchange the part that needs to be changed with what it should be changed to, delete the original file, and rename the new one to the correct name. So the first problem I've run into (and I'll probably have more) is that when I'm trying to read stuff from the original file, my program doesn't seem to be finding the original. I'm sure much of my problems will be just from not knowing how to use the C functions so bear with me. Right now I have the following:
Code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
[code]...
And when I try to run it I get the following:
Code:
Died Here: No such file or directory
Segmentation fault
Right now the length of 50 was just a random test length. Pretty much I was just trying to get it to read anything from the file. In the end I'm going to want it to read the entire file bit by bit, but at the moment I can't seem to get it to read anything.
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...
I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
this script returns me :
sed: -e expression #1, char 2: extra characters after command
sed: -e expression #1, char 2: extra characters after command
Code:
#!/bin/bash
while read line
do
sed -i "$line" 'd' test.txt
done < test.txt
I need to run a command in a shell script to insert a line in a file, after it finds certain line. To add the line 'user = mysql' after the line [mysqld] in file /etc/my.cnf
View 3 Replies View RelatedI am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
going back to my earlier post "Last digit minus ONE", when i get a Ip addresse with minus 1 ($ip), i need to add the new Ip address ($ip) to resolv.conf of that system. so from resolve.conf:
Code:
# /etc/resolv.conf .......
domain mydomain.ca
nameserver 11.21.36.98
nameserver 11.21.37.98
[code]...
tried with sed
Code:
sed 'nameserver $ip/domain/G' -f /etc/resolv.conf
but not able to get it.
I have to do several scripts and I have no idea of how to do this one: Make a script that read line by line the passwd file and prints in console.Hope you understand couse my english isso bad as you can see.Our teacher told us something like this:#!/bin/bashwhile read line doecho $lineadone < dispositiveexit
View 9 Replies View Relatedin gcc how to read a blank line ie a string of length 0.
my code: Code:
#include<stdio.h>
#include<string.h>
#include<string>
using namespace std;
[Code]....
in gcc how to read a blank line ie a string of length 0.my code:
Code:
#include<stdio.h>
#include<string.h>
[code]...
I want to do this
read a files's specific line but return as argument only part of it ie
...
value # this is mass
value2 # this is force
so, how can I get / use the $value and $value2 as arguments for some other file and skip the rest of the line(s) ? of course, the values are different everytime, but the comment always the same, as well as the position of the lines in the file
