i want to read line by line in a files in C language actually my porblem is i have a one file cotains
AT
OK
if iam using fgets, it is reading each time AT only it does not moving to Ok in that file
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedI need a qtimer to trigger reading of a file line by line, I have the code sort of running with the timer trigger but qtimer will just read the first line over and over as it is now.
Here is the code so far:
self.lcdtimer = QTimer()
self.connect(self.pushButton85,SIGNAL("clicked()"),self.update)
self.connect(self.lcdtimer, SIGNAL("timeout()"), self.lcdxyz)
Code:
def lcdxyz(self):
import time
import os
[code]....
i want to read line by line in a files in C language actually my porblem is i have a one file cotains
if iam using fgets, it is reading each time AT only it does not moving to Ok in that file
so I have a script that creates couple of txt files. First file output is something like below..
cn=test,ou=something,ou=some,o=org
cn=testa,ou=something,ou=some,o=org
cn=testb,ou=something,ou=some,o=org
second file output is something like below..
usera
userb
userc
Quote:
userdn=`ldapsearch -x -h $server -LLL "(objectclass=person)" dn | grep dn: | cut -d" " -f2 > userdn.txt
for i in $(cat userdn.txt);do
ldapsearch -h $server -p 389 -x -D $admid -w $admpwd -s one -b "$userdn" dn | grep dn: | cut -d" " -f2 | cut -d"=" -f2 | cut -d"," -f1 > user.txt
for i $(cat user.txt);do
echo "$userdn"
done
done
when I ran both ldapsearch commands invidually, they work fine. But when I ran script, I got first file correctly but not the second one. It looks like its not reading the first file correctly and not setting the variable ($userdn) value correctly in the second ldapseach command. I want read first file first line and run the second ldapsearch and continues, then read the second line..and so on.
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies View RelatedI have to do several scripts and I have no idea of how to do this one: Make a script that read line by line the passwd file and prints in console.Hope you understand couse my english isso bad as you can see.Our teacher told us something like this:#!/bin/bashwhile read line doecho $lineadone < dispositiveexit
View 9 Replies View RelatedI just learn perl script.May i know how to simplify the code below especially in the red color part? i saw some examples in internet, they use "next" command.
View 20 Replies View RelatedCode:
#!/usr/bin/perl
use 5.10.0;
use strict;
use warnings;
use Net::Ping;
[code]....
have been playing around with a script for a few hours and now I need to be able to output the lines in a text file one by one to be used later in the script.What it gonna do is to read a log file and grep the usernames, then write them to a file, and then run one script for each user, to search for more information about them in the log.But I don't know how to output a single line from a file, and google does not return any solution.
View 3 Replies View RelatedI want to do this
read a files's specific line but return as argument only part of it ie
...
value # this is mass
value2 # this is force
so, how can I get / use the $value and $value2 as arguments for some other file and skip the rest of the line(s) ? of course, the values are different everytime, but the comment always the same, as well as the position of the lines in the file
i am trying to read in a file 1 line at a time and for some reason it stops printing out at about line 62,000.
i am doing this:
Code:
while(fgets(c0, 1085, fstream0) != NULL)
but after about 62,0000 lines it stops printing. no seg-fault, no core dump. it just stops printing to the terminal then returns me to the command line after a couple of minutes. as a hack i am doing split -l 50000 on the input and calling my program 5 times.is there some limitation on fgets that i am not understanding ?
I'm writing a program which now accepts user input:
Code:
echo "Enter a date in the format YYYY MM DD hh mm ss."
read gregyr gregmo gregdy greghr gregmn gregsc This lets the user input a date and time, such as 2011 06 21 15 12 45, and have each number assigned to their corresponding variable. Later in the program, these variables are put into an equation, and then the terminal spits out the answer. Now I have to have the program read all of the lines from a text file, which is in this format, assign the variables.
I've never programed shell scripting.
Code goes like so:
I simply want to read a file "data.txt" line by line Then char by char and add them into a result var. The file is supossed to always contain numeric values
I ran into it while google Segmentation Fault. I'm writing a simple C program that reads a file that counts each line and numbers it then writes to a file called sdout. I copyed my program mostly from the text book but im still having problems. Heres my code:
#include <stdio.h>
#include <stdlib.h>
void new_line(FILE *, FILE *);
int main(char *argv)
[Code]....
I created the following.
x="top
middle
bottom"
I would like to make the following work.
while read line
do
echo $line
done
instead of importing a file I would like to use the variable $x I tried using pipes, but with no luck. My goal is to read one line at a time, but not have to export my data to another file, I would like to keep it all within one script.
I need to edit a line in a file in gedit, but its read only. I need to change
; default-sample-rate = 44100
to
default-sample-rate=44800.
Would anyone know if there is an option to make a read only file editable? Judging by the responses to the thread I followed to enable my soundcard, it is possible, and perhaps there is some setting etc that needs changing
I have a project due for my Intro to C++ class and we are suppose to generate a file listing that will take an input of a C++ source code with .cpp extension and make a copy of it with a .lst extention that will have a line number preceding each and every line.
View 12 Replies View RelatedI am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
Sample input $FileName
Code:
Code:
Code:
Script so far:
Code:
I wish to add information to one of my files based on matching IDs,
Here is an example
(the id is the 3 colunm)
(the ID is the 2 colunm)
And the output i wish to be
OUTPUT:
So as you can see the ones that do not match are still present, and the ones that do match just have the extra information from file2.txt added to them.
I thought about using join but that only seems to join the ones that match displays thoes only. i would like all the information in the output file.
I've written a script to parse a file and print each line that ends with matching pattern, if the next line is blank. The pattern lines are the result of md5sum $i|sed 's/path///g' so that only md5 and filename appear. Here's what I'm using.
Quote:
for fline in `sed -n '/.*.ext$/p' file1`
do
if [ "`sed -n -e '/'"$fline"'/ {n; p;}' file1`" == "" ]
then
echo ""$fline" has no info" >>file2
fi
done
[Code]....
Was wondering if any perl guru's could help me with a quick log file adjustment. I have a text file that looks like so (tabs and newlines are revealed so you can see what separates the data):
There are maybe 100 lines of text in this file at any given time. I need to delete all duplicate lines only looking at the first bit of text prior to the first tab. It doesn't matter which one gets deleted as long as there are no two lines that begin with that same text at the beginning before the first tab. So in this example, either the fist line "1234" or the last line "1234" would need to be deleted. I already have code in my script that opens the files - I just need the code to read the text into an array and the part that would find matches based on the above criteria, and make the deletions.
If it would be easier, I can even do a system call and use SED (v4.1.5) and/or AWK (3.1.5) instead.
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
I am combining data from a couple different input files and creating an output file in a specific format. I notice that if I use the >> operator, information gets appended to a new line in my output file. This is useful, but if I'd like to append onto the CURRENT line, is there an easy way to do this? I've been googling around and see lots of complicated answers, nothing that suggests to me an easy way to do this. For example, if my output file looks like this:
b1a:] cat test
hello my name is
b1a:]
and I'd simply like to append "Bob", how can I do it? If I use
b1a:] echo Bob >> test
b1a:] cat test
b1a:] hello my name is
Bob
b1a:]
So what I would prefer is some command that would create the result:
hello my name is Bob
I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
In C, I want to make a program that will take a file and replace it with a file that's nearly the same but with some minor changes. Also, I would like to point out that I'm still fairly much a beginner with C. As for an example of the file, I want to take something like this:
Code:
Random Crap
More Random Crap
Even More
Something That Changes XXXXX
[code]....
I figured the best way to go about doing this was to open the file and a blank file, read the original bit by bit and when it gets to the point that needs to be changed exchange the part that needs to be changed with what it should be changed to, delete the original file, and rename the new one to the correct name. So the first problem I've run into (and I'll probably have more) is that when I'm trying to read stuff from the original file, my program doesn't seem to be finding the original. I'm sure much of my problems will be just from not knowing how to use the C functions so bear with me. Right now I have the following:
Code:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
[code]...
And when I try to run it I get the following:
Code:
Died Here: No such file or directory
Segmentation fault
Right now the length of 50 was just a random test length. Pretty much I was just trying to get it to read anything from the file. In the end I'm going to want it to read the entire file bit by bit, but at the moment I can't seem to get it to read anything.
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...
this script returns me :
sed: -e expression #1, char 2: extra characters after command
sed: -e expression #1, char 2: extra characters after command
Code:
#!/bin/bash
while read line
do
sed -i "$line" 'd' test.txt
done < test.txt
I need to run a command in a shell script to insert a line in a file, after it finds certain line. To add the line 'user = mysql' after the line [mysqld] in file /etc/my.cnf
View 3 Replies View Related