in c/c++, double is usually 8 bytes. It has a 52-bit mantissa (or significand, or base), an 11-bit exponent, and a 1-bit sign. My question is: is the mantissa a 52-bit integer? Or is the decimal point just after the first bit. Meaning: if the mantissa was 1000110011100011 (in binary) would that make the value of the mantissa (assuming the exponent was 0) 1000110011100011, or 1.000110011100011? (in binary)
View 1 RepliesI am trying to generic way to convert the string datatype to other primitive data type. To achieve, i used Template . But i getting error and couldn't resolve the issue and error reported is also clueless.
Code
====
#include <vector>
#include <iostream>
#include <string>
[Code].....
I declared a variable as int data type which was a placeholder for a resulttatus (meaning, based on the result status that variable varies from 0/1/2/3. It can contain only these four values).data type is 4 byte integer in C#. But I can declare this variable as which represents a 1 byte integer. Since that variable contains only 1 or 2 or 3 or 4, declaring the variable asis wastage of memory space.Before declaring any variable we need to just think of the memory space needed for that variable, our requirement,
View 6 Replies View RelatedI need a data type to hold TetraByte.Even I want to know details of int64, long, unsigned long long, and how they differ from each other.
View 14 Replies View Relatedmisunderstood structure definition at the beginning
View 3 Replies View RelatedI have a problem - I have files with rows of data and I need to check if the next row (of the same type) has the NEXT date in it so I need to extract a date in YYYYMMDD format from a row (easy enough) then add one day to it and compare it to the the next date I encounter on a subsequent row.
So if I have
DATE|20100530
VAL|kahskjhd
[code]...
I'm working with Radiotap headers right now. I want to get the RSSI data. I came through a problem that I can't figure out right now.The value that I need to get is:
Code:
s8 IEEE80211_RADIOTAP_DBM_ANTSIGNAL
now, when I printf it:
[code]...
how to convert a dictionary data-type to a string?
actually I am trying to update some json file 's dictionary.
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
i have Ubuntu10.10 (kernel-2.6.35-22-generic) installed. struct stat StatBuff;
[Code]...
I have mounted a windows share folder on /mnt. When i gave any directory within /mnt/ to stat function it fails with errorno 75. perror shows "Value too large for defined data type". Example 1 is fail but Example 2 works fine.
In bash I need to use some equivalent of double quotes inside double quotes (or the other way around.)I need to run the following statement to get the output of foo and store it in a variable while passing foo the $file which probably contains spaces.
Code:
variable=$(foo "$file")
The problem is that foo might return an empty string and if it does I need to catch it
[code]...
I am going to write a function which will do different operation base on the data type of the input parameter.
I am using C (Pure C, not C++).
The problem is that I do not know how to get the data type of the input parameter in C Language.
Can anyone tell me how to do this.
I am trying to convert a mdf file to iso with mdf2iso and this message pops up "Value too large for defined data type". The file is about 4.6 GB. Any other information
View 2 Replies View RelatedI've downloaded a big file from another server via "wget" to my /backup/ directory, and after the download was compeded I did run "ls" and the error was:ls: full_plesk_backup: Value too large for defined data type.
View 13 Replies View RelatedSomeone know how i can convert from hex string to double in c/c++?? Example 40668472B020C49C is 180.139
reference page: http://babbage.cs.qc.edu/IEEE-754/64bit.html
I need to generate random numbers using /dev/random in C. The numbers should be of type double (64-bit floating point).The functionality should be equal to linux command "od -An -N8 -t fD /dev/random", but written in C.The prototype should be "double drand(void);".
View 7 Replies View Relatedis there a way to recover data from a hd partition type fat32...cause ...cause right now it shows up as unallocated space..earlier i tried installing windows in a unused partition located just above this partition....i need to recover the data real soon...
View 1 Replies View RelatedI'm trying to write a bash script that has to extract values from a csv file. Problem is there are lines like this:a,b,c,"dd,dd,dd",e,f,gI'm using awk to extract the values but when I try it extract value 4 with awk I get:"ddinstead of:"dd,dd,dd"Does anyone know how to get awk to ignore commas within double quotes?
View 5 Replies View RelatedCode:
int main ()
{
[code]...
Here's my code for bubble sort with double type
Code:
#include <stdio.h>
void swap_double( double *a, double *b )
{
double _t = *a;
code....
grep -e XkbLayout /etc/X11/xorg.conf | grep -v "^#" | awk '{print $3}'
output = "gb"
sometimes= "us"
I want to convert double quote to single quote in a text file. I tried escape characters however no success. Please find details as follows:
-sh-3.00$ sed 's/"/'/g test.txt
sed: -e expression #1, char 7: unterminated `s' command
-sh-3.00$ cat test.txt
"unix"
I want "unix" to be converted to 'unix'
can i get the ocuurance of left click-right click-double click?i need the time of ocurance and the click(left-right-double) that happend.any software?any clue..i need it in linux environment(kde or gnome)
View 14 Replies View RelatedWhwn I am sending mails , I used too get message like
Host found but no data record of requested type.
MTA: postfix
I'm trying to write an extension to PHP which means coding in C. I'm really really rusty at C coding and was never very good at it.
Can anyone propose an efficient, safe, and [hopefully] future-proof way of reversing a double? Keep in mind that it should work on as many systems as possible and on 32- and 64-bit systems (and on ???-bit systems in the future?). Will the size of a 'double' ever change or will it always be 8 bytes?
I've tried this and it doesn't work...the compiler complains about "invalid operands to binary" because I'm trying bitwise shiftw on a non-integer.
Code:
x = (x>>56) |
((x<<40) & 0x00FF000000000000) |
((x<<24) & 0x0000FF0000000000) |
((x<<8) & 0x000000FF00000000) |
[Code]....
I have tryed out this operator on program:
Code:
#include <iostream.h>
#include <iomanip.h>
#include <fstream.h>
ofstream myfile;
[code]...
which definitly is not the same number. I guess somewhere in the convertion from double to char* ("<<") something is not right and what can i do to save these double numbers in an accurate manner in a file?
I have been battling with regular expressions and am a little lost. I want to find all my files that end with .la and have been trying this
Code:
slocate -r .la$
which finds them but also files like mozilla. The escaped full stop seems to be ignored however this works :
Code:
slocate -r \.la$
so why is the double escaping needed ?
My application receiving SIGABRT by saying "smallbin double linked list corrupted". It is developed in C/C++ on Linux RHEL5.4
View 2 Replies View Relatedi currently have both xubuntu 10.10 32-bit and windows 7 64-bit installed on my laptop which i use mostly for college work and basic programming (i'm still learning to program).i have a 150gb partition with win7 installed, a 20gb partition with xubuntu installed and a 15gb partition with my linux home folder on, the rest of the space is unused because i thought i may need it for something else in the future.the home folder partition is formatted to etc4, i now have a need to access this data from win7 for college work, i know that windows doesn't support mounting of etc file systems so i have hit a problem.
i thought about changing the type of partition from a ect4 to fat32 but will this delete my data? or ,are there any third party software packages for windows that will allow me to mount ect4?