Programming :: Convert Short Array To Char Array?
Jun 7, 2010I have trouble converting a short array to a char array
Code:
short pShort[4] = { 0x41, 0x42, 0x43, 0x44 };
How to convert this to a char array?
ADVERTISEMENT
Programming :: Point A Char Pointer To A Part Of Another Char Array?
Nov 4, 2010Programming in C.I have two char arrays.char buf1[1024];char buf2[1024];Aren't buf1 and buf2 also pointers?I read in 1024 bytes into buf1 which contain about 300 bytes of characters with newlines. The data is basically a few English sentences. I'm trying to scan buf1 for newlines and then stop at the 1st newline and copy the rest of the data from that 1st newline into buf2.So I run a for loop to look for that new line.
Code:
for(i=0; i<1024;i++) {
if((strcmp(&buf1[i], "
[code]...
Programming :: C Define Char* Array With Calloc?
Mar 6, 2011This works for "char" but i need "char*",how do I do it?
Code:
char* tk = (char*) calloc(ctk+1,sizeof(char*));
Error when I use it:
Code:
error: invalid conversion from har* to har
Programming :: C String As An Array Of Chars And As A Pointer To Char?
May 13, 2009Please look at the comments
Code:
/*
* TEST CASE TO CHECK DIFFERENCES BETWEEN STRING AS
[code]...
Programming :: Pass A Char* Array As A Function Paramter In C++?
Jan 27, 2011I have the following char* array
Code:
char* chrarray[] = {"Hello","LinuxQuestions"};
and I need to pass it into a function, how should I define my function in the header file?
[code]....
Programming :: Print A Range Of A Char Array Without A For Loop?
Nov 6, 2010Program in CSay I have a char array of 1024 bytes called buf1.But I only want to print the chars in index 0 up to index 30. I know I could do this with a for loop. But is there any other way? What about maybe storing from 31-1024 to another char array say buf2 with strcpy and somehow popping 31+ out of the buf1 char array?
View 3 Replies View RelatedGeneral :: Convert Full-disk RAID5 Array To Partition-based Array?
Dec 23, 2010I have a RAID 5 array, md0, with three full-disk (non-partitioned) members, sdb, sdc, and sdd. My computer will hang during the AHCI BIOS if AHCI is enabled instead of IDE, if these drives are plugged in. I believe it may be because I'm using the whole disk, and the AHCI BIOS expects an MBR to be on the drive (I don't know why it would care).
Is there a way to convert the array to use members sdb1, sdc1 and sdd1, partitioned MBR with 0xFD RAID partitions?
Programming :: Reading In A Outside Text File And Putting In The String On That Line Into A Char Array That Is Already Allocated?
Mar 29, 2011Here is the issue. I am reading in a outside text file and putting in the string on that line into a char array that is already allocated.
Code:
int main(int argc, char *argv[])
{
[code]....
Programming :: Convert String To Int Array?
May 9, 2010I've searched around and can't find out how to convert a string ( like "12345" ) into an int array ( x[ 5 ] = { 1, 2, 3, 4, 5 } ; ).
View 4 Replies View RelatedProgramming :: C Realloc Resize Array / Delete And Add Information Into The Array?
Mar 6, 2011I am trying to dynamically delete and add information into the array "blah"
Code:
int blahsize = 1;
char** blah = (char**) calloc(blahsize+1,sizeof(char*));
Adding information:
Code:
blah[1]=stuff1;
blah[2]=stuff2;
code....
Programming :: Convert String Array To Character?
Aug 18, 2010i have problem in java. how to convert string array to character. e.g string a[]={"ab","abc","abd","ag"}; what will be the character array ?
View 3 Replies View RelatedProgramming :: How To Convert Negative Integer To Byte Array?
Oct 26, 2010I need to convert an integer to a byte array of size 2 and vice versa. The code shown below works well for positive values but not for negative values. Also, using an array of size four makes the conversion works. However, I am limited to an array of size 2.
View 5 Replies View RelatedProgramming :: Converting A PHP Array Into An HTML Array?
Aug 9, 2009I'm writing a PHP program. I've encountered a problem; in the following code I try to pass $_POST['delete'] which is an array as the value of a hidden input to some form, but it doesn't do so.there's something wrong with converting PHP array into HTML array. I'm sure that $_POST['delete'] is not null and is a real array.
echo '<input type="hidden" name="delete[]" value="'.$_POST['delete'].'" />';
Programming :: Filling 2D Array With 1D Array In C?
May 26, 2010(I am using vector() and matrix() functions from "Numerical recipes in C".)There are 100 numbers to be stored in 2D array of 10 rows and 10 columns.100 numbers are stored in a 1D array.I get "segmentation fault" at the line indicated in the segment of my code below:
Code:
:
:
#define size 100
#define nl 1
[code]....
Programming :: Bash Array Add Function Example Using Indirect Array Reference As Function Argument?
Jun 20, 2010I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....
Programming :: Convert A Char * To Unsigned Char?
Mar 4, 2010is it possible to convert a variable from char * to unsigned char ?
View 5 Replies View RelatedSoftware :: Bash - Indirect Array Reference To Array With Values Containing Spaces?
Jun 4, 2010This _almost_ works. I just can't quite get it to honor the spaces.
Code:
#!/bin/bash
profiles=(
PROFILE_ONE
)
PROFILE_ONE=(setting1 "setting number 2")
[code].....
Ubuntu Servers :: Creation Of RAID-0 Array In Disk Utility Resulting In Smaller Than Expected Array?
Sep 27, 2010I have a NETGEAR ReadyNAS NV+ with four 1TB drives in a RAID-5 array. This is our primary file storage. This has previously been backed up to a hardware RAID-0 array directly attached to our Windows server. The capacity of this backup array is no longer sufficient. So the plan was, take a bunch of 200GB to 320GB drives (And a 750) I had kicking around, chuck them in a couple of old SCSI drive enclosures I have collecting dust, attach them via IDA/SATA-to-USB adaptors to a USB hub, attach that to the server, create a JBOD array spanning the disks, and back up the NAS to that. Performance is not an issue as this is just to be used for backup, with the idea being as near to zero cost as possible (Spend so far = NZ$100�ish).
The first hurdle I struck was Windows not supporting Dynamic Disks on USB drives (Required to create a spanned volume). At first I resisted using another machine (i.e. a machine running Ubuntu) as I didn't want to dedicate a piece of hardware to backing up the NAS. I then decided it would be acceptable to do this via a VM, which is what I've done.So I have 10.04 running under VMWare Server 2.0.2 under Windows Server 2008 R2. The disks are all presented to the VM. I wasn't sure if I was going to end up creating the array under LVM or something else, but I noticed Disk Utility has an option to create an array, so I tried that. When I add two 250GB drives, the array size is 500GB. When I then add a 160GB drive, the array size drops to 480GB. Huh? If I keep adding disks (Regardless of order) the final array size comes out at 1.8 TB, as per the attached screenshot. Now with the following drives, I expected something more like:
160 + 250 + 250+ 750 + 250 +200 + 200 + 250 + 320 + 250 + 320 = 3.2TB
Am I missing something or making a false assumption somewhere?
General :: Bash: Calculating In Array And Storing Result In Array?
Dec 2, 2010I have an array called arrayini which stores numbers. I want to take log to the base 2 of each of the numbers in that array and put it in file called result. I've used the following code to do it.
Code:
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
echo "scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >result
It works fine but its taking pretty long to calculate since I've got about 230,000 items in the array. So I decided to store the result into an array hoping that it'd be faster. I tried the following code. arrayresult is where I try and store the result. The code doesn't work because of the second last line.
Code:
unset arrayresult
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
arrayresult[$i]="scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >FILE2
There is a syntax error clearly.
Programming :: How To Convert Wide Char Data?
Jul 15, 2010Can anyone please suggest me how can we convert a wide char data in linux which is of 32 bit to a 16bit data. I have a file which has 16bit binary data? Could any one please give me ideas.
View 2 Replies View RelatedProgramming :: Convert The Int To A String Using Stringstream Then Convert The String To A Char?
Mar 26, 2011Do I have the convert the int to a string using stringstream then convert the string to a char? or is there a more direct way?Also is there a way to tell the length of a int?
View 5 Replies View RelatedProgramming :: Array Containing Words In C?
Sep 24, 2010This array is supposed to contain 12 elements (names of the month) What I want to achieve is that depending on some user input (a number 1-12) a full name of one of the months will be displayed, eg.
Code:
scanf("%d", &month);
printf("The month is %c", months_names[month]);
Programming :: How To Do An Array Of Characters
Feb 18, 2010I am trying to create an array containing all ASCII characters, how do I create one:
Code:
#!/bin/bash
CHARLIST=( a b c d e f g h i j k l m n o p q r s t u v w x y z
[code]...
Programming :: Getting String Value From Array?
Oct 29, 2009I've got a problem...
a[0] = 22
echo $[a[0]]
echoes 22 - that works fine
[code]...
Programming :: Arrays In The C Programming Language Are Pointers To The First Element Of The Array?
Mar 27, 2010I wonder why arrays in the C programming language are pointers to the first element of the array, not the first element of the array itself?
View 14 Replies View RelatedCentOS 5 :: Mistakenly Setup RAID 0 Array On / Instead Of RAID1 During Setup - Convert Without Loss?
Dec 15, 2010So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....
Programming :: Array Creation At Run-time In C++?
Apr 4, 2010I have a text file from which i read a number of names with their lengths at the run-time.Now i want to created a char array having the length and name as already read from the text file at the run-time. There is no compilation involved. Every thing is happening at the run-time. I tried using STL like map along with malloc but i am unable to name an array at run-time. I can keep some type of mapping with previously created arrays
View 3 Replies View RelatedProgramming :: Represent Alphabet Into A Array?
Jul 9, 2010i am trying to represent alphabet into a array, and then i can count the frequency
for example
array[a]=0
array[b]=0
but i find the index of the array seems to be
array[1]=0
array[2]=0
I was try this way get the ascii for them, actually I have done this in java and it is simple.
something like this format
array[ascii{a}-ascii{a}]=0
array[ascii{b}-ascii{a}]=0
I have done a lot of searching , but cannot get what I want.'%d' "'$char" like this would not work.
Programming :: Sorting 2 Dimension Array?
Aug 5, 2010how to sort the 2 dimensional array below by column 1 then by column 2?
22 55
2222 2230
33 66
44 58
222 240
[Code].....
this is a small part in my awk script. the input data is not in file, but it was manipulated in my script.
Programming :: Write Apr4sens In Array
Jun 3, 2011[code]...
I manage to write apr4sens into file,works fine.But how to write it into array,which I could later reshape and so on. I tryied like this
group=apr4sens. It doesn't work.
