Programming :: Compiling Lex Output As C++?
Apr 6, 2011Lex's (actually Flex) output contains this:
Code:
#ifdef __cplusplus
extern "C" int yywrap (void );
[code]...
ADVERTISEMENT
Programming :: NASM Compiling With An IDE?
Sep 21, 2010I am searching for the IDE that can compile and debug a NASM code. I am using ubuntu 10.04 and I can make compile via terminal but I must view registers for educational purposes.
View 4 Replies View RelatedDebian Programming :: Cross Compiling With Qt
Dec 11, 2014I am trying to cross-compile my Qt application for armhf on Jessie, so what I did was install qt5-default:armhf, but when I tried running qmake I found out that it contains also an armhf version of qmake so I was not able to run it.Then I installed the amd64 version to have at least a runnable version of qmake, but it was only to find out that qmake contains only hardcoded paths, so I could not use it for the armhf libraries, well I could but I had to run qmake (amd64 version) and afterwards open the makefile and change all paths from amd64 to armhf.
But as this is not so convenient I was wondering if there is a normal way to do this, I know you can compile the source yourself but I had quite a lot of problems with dependencies there. Is it possible with the standard repository binaries or should I just go back to compiling the source myself? Maybe I can compile only the building tools without building all the libraries I already got from the repository.
Programming :: Compiling The Library + Application?
Nov 28, 2010I'm trying to learn how to cross-compile libraries (static and shared) and executables for the Blackfin + uClinux environment.At this point, I can successfully compile a stand-alone "Hello, world" but fail when trying to add a (static) library to the mix.Here's the source code I wrote:
Code:
#========== bar.h
void mytestfunc(void);
#========== bar.c
#include <stdio.h>
[code]...
Googling for this returns talks about "name mangling", but I don't know if this is what it is, and how to change the source/command to solve it.
Programming :: Compiling The Poppler Pdf Library?
Jul 29, 2011I am trying to use the QT4 frontend of poppler library in my application so I need to compile the library.In its main directory ./configure can be run but I got
Code:
checking which font configuration to use... fontconfig
checking for FONTCONFIG... no
configure: error: Package requirements (fontconfig >= 2.0.0) were not met:
No package 'fontconfig' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables FONTCONFIG_CFLAGS
and FONTCONFIG_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
I have fontconfig installed (ubuntu):
2.8.0-2.1ubuntu3 (fontconfig)
However I have no idea where those flags are and what to set them to.
Programming :: Meaning Of Compiling A Program?
Aug 17, 2010I have been using gcc to compile C programs.
I want to know what exactly is the meaning of Compiling a C program.
I checked
cc -S prog.c
will give an .S file and if you analyze the hexdump I saw some assembly instructions.
So what does the compiler do which is not required in case of interpreted languages?
Debian Programming :: LMMS Not Compiling With VST Support
May 22, 2015I did see another topic on this forum regarding VSTs in LMMS, but it didn't solve my problem. I am running using the 64-bit testing branch of debian, which may be causing some of my problems. I tried compiling LMMS myself, but I ran into an issue with wine when it tried to compile RemoteVstPlugin.
It seems as though wine didn't install winegcc or any other tools like that. After a while, I did manage to find winegcc and some of the other tools in /usr/lib/x86_64-linux-gnu/wine/bin. I decided to add some symlinks in /usr/local/bin to point to winegcc, wineg++, winecpp, and winebuild. After that, it seemed to give a different error message, but still failed to compile. It now gives me the following error:
Code: Select all[ 83%] Generating RemoteVstPlugin
/usr/bin/ld: Relocatable linking with relocations from format elf64-x86-64 (/usr/lib/x86_64-linux-gnu/wine/wine/libwinecrt0.a(exe_entry.o)) to format elf32-i386 (RemoteVstPlugin.Azfbf1.o) is not supported
winebuild: /usr/bin/ld failed with status 1
[Code] ....
I may be missing some dependencies because I couldn't run build-dep without removing skype but I don't think that's the problem. I thought the above problem may have something to do with wine, so I was going to try compiling wine to. I ran into problems with that, and ditched that idea. I really don't know what to do anymore. I can't just disable VST support, because that's why I tried to compile LMMS by myself to begin with!
Programming :: Cross-Platform Compiling -m32 Flag
May 14, 2010I have an odd thing. And thats the following:
I entered: gcc raw.c -m32 -g -static -o raw
And I got:
I installed all bin32 libs I am on a x64 system.
Programming :: Basic Cross Compiling Tutorial?
Feb 4, 2010I have written a program that I would like to cross compile for x86 and x86_64 architectures. I have tried google and the search function here to no success, most information I find is too specific (instructions for a specific program), or dealing with cross compiling for windows on linux.Does anyone know of a tutorial dealing with straight making a 32 bit binary on a 64 bit processor (both are intel)?
View 2 Replies View RelatedProgramming :: Compiling A C++ Program Using G++ With X86 Settings On X86_64?
Jan 25, 2010How can I compile a C++ application using g++ with x86 platform settings on a x86_64 machine ? What are the possible negative side-effects of compiling a C++ application with x86 settings on a x86_64 platform ?
View 6 Replies View RelatedProgramming :: Compiling And Linking Multiple Files Using Gcc?
Mar 13, 2011compiling and linking using gcc: What does a file name with a suffix '.a' represent? If I have multiple .c and .h files, how can I link them together? How can I create the .a file?
View 6 Replies View RelatedProgramming :: Compiling Binaries With Static Linkers
Sep 3, 2010I am trying to compile certain Linux general utilities like ls, lsof, ping, netstat with static linkers and not sure how do that. Does any one aware how to compile the application with statically rather than dynamically.
View 4 Replies View RelatedProgramming :: Compiling Kernel Module Using (/asm/system.h)
Apr 3, 2011I`m trying to compile sources of kernel module which has been written for kernel 2.6.9. There were many changes in kernel headers since then in current kernel sources. I`ve found that old /asm/system.h was moved under architecture dedicated directory /arch/*/include/asm/system.h. Anyway during sources compilation I`m having errors related to kernel sources. It looks like there is something wrong with this /asm/system.h
Code:
../asm/system.h: In function �__cmpxchg�:
../asm/system.h:248: error: expected string literal before �LOCK_PREFIX�
../asm/system.h:254: error: expected string literal before �LOCK_PREFIX�
[code]....
Programming :: Compiling Libusb C++ Program To Run Without It's Dependencies?
Aug 6, 2010I've built a piece of hardware that communicates using usb. I was wondering could I make a libusb based program run on it's own without gcc/ libusb
View 10 Replies View RelatedProgramming :: Compiling C Program For HPUX On IA/PA 64 Bits?
May 17, 2011I had developed a C program on linux (x86). Now I need to port it to HP-UX OS on IA/PA 64 bit arch. What are the options to be used with cc compiler, on linux (x86), so that this could be done, if at all.
View 1 Replies View RelatedProgramming :: Error Compiling C++ Program Using C Library
May 8, 2010I've created 3 files: swap.h and swap.c then make static library from it
Code:
Then I write 2 program to test this library: test_swap.c and test_swap.cpp
I compile
Code:
What's wrong with this in C++? And how can I make a library that can work both for any C and C++ program?
Here the source code
Code:
Code:
Code:
Programming :: G++ Fails Compiling New Program / Make It Possible?
Jul 16, 2009I am trying to compile systemc. Configuration is done OK and Makefiles are created. As soon as the "make" command i issue, recursively reaches the "utils" directory, errors are produced -declaration and include errors.
The files referenced by the errors DO exist and i hava managed to give g++ "-I ${LD_INCLUDE_PATH}, ie the variable, where all header dirs are listed. Libraries and compilers for gcc3.3 and g++3.3, i believe, are installed OK. code...
Programming :: Getting Error While Compiling In Gambas On Ubuntu
Sep 5, 2010Geting the following error while compiling in gambas on ubuntu. What is a secret key ?
[code]...
Programming :: Compiling Kernel Module In Ubuntu?
Jul 6, 2010I have just started learning Device driver programming in Linux and am stuck in my first program. Its just to see init_module and cleanup_module calls to use printk and see results using dmesg. program is:
Code:
#define MODULE
#include<linux/module.h>
int init_module(void)
[code].....
Programming :: SDL + Eclipse + CDT Compiling But Not Linking With G++ On Arch?
Jan 22, 2011I have set up Eclipse + CDT on an Arch 2010.05 install. I set up an eclipse project and added SDL as a dependency (see below):
Project -> Properties
* -> GCC C++ Compiler -> Preprocessor -> main=SDL_main
* -> GCC C++ Linker -> Libraries -> SDLmain SDL (in that order top to bottom)
* -> GCC C++ Linker -> Libraries -> Library Search Path -> /usr/lib/ (I verified that libSDL.a and libSDLmain.a are there)
This is the code I'm compiling. It's designed to just be a hello world style SDL app to see that everything is working.
[Code]...
Programming :: Sms Server Tools Cross Compiling
Apr 11, 2010I wanted to cross compile sms server tools(url)for arm-linux with arm-linux-gcc compiler but I can not this is all information that I have from it's error:
Quote:
[root@localhost smstools3]# ls
doc examples install.sh LICENSE Makefile package.sh README scripts src uninstall.sh
Quote:
[root@localhost smstools3]# cat Makefile
# Makefile
# If you change destination of executables, remember to change
# startup script (init.d/sms3) too.
#BINDIR=/usr/local/bin
BINDIR=/mnt/sd/Utility/sms/ ///I changed here for cross compilation
code....
Debian Programming :: Cross-compiling A Kernel For I386-elf
Nov 14, 2013I just finished building a cross-compiler for i386-elf. But when I try to use it, the terminal gives me this error:
Code: Select all/home/isaac/Cross-compiler/lib/gcc/i386-elf/4.8.2/../../../../i386-elf/bin/ld: cannot find crt0.o: No such file or directory
/home/isaac/Cross-compiler/lib/gcc/i386-elf/4.8.2/../../../../i386-elf/bin/ld: cannot find -lc
collect2: error: ld returned 1 exit status
Debian Programming :: Error Compiling Qalculate From Source?
Feb 15, 2014I'm trying to install the calculator Qalculate from source so I download the tar.gz package for KDE from their official website to my ~/Downloads folder. I unzipped it with
Code: Select all tar xzf qalculate-kde-0.9.7.tar.gz
I moved the exploded folder to my /home/guest/ folder (my user-name is guest), I entered the qalculate-kde-0.9.7 folder and searched for a INSTALL or README file. Here's what the INSTALL file says to do. The INSTALL file says to run the following commands
Code: Select all./configure
Code: Select allmake
Code: Select allmake install
Code: Select allmake clean
After giving the first command, trouble started; here's what I got:
Code: Select allroot@aliquis:/home/guest/qalculate-kde-0.9.7# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
[Code] .....
This is impossible, as I am running a fully functioning kde system. What should I do? I don't find the kde version of Qalculate in Apper...
Debian Programming :: Compiling Linux Kernel Module
Aug 27, 2014I'm trying to compile a Linux kernel module called hello-2.c using the command "make -C /lib/modules/$(uname -r)/build M=${PWD} modules" (without the quotes) (which I found online), and the following is the (seemingly successful) output.:
Code: Select allmake: Entering directory `/usr/src/linux-headers-3.2.0-4-amd64'
Building modules, stage 2.
MODPOST 0 modules
make: Leaving directory `/usr/src/linux-headers-3.2.0-4-amd64'
However, I don't see a hello-2.ko (in the same folder or anywhere else for that matter). I'm Using Debian GNU/Linux 7.6.
Everything I am doing is within a folder/directory called "thefolder" (without the quotes) in the "/tmp" directory (without the quotes).
Why I can't see a hello-2.ko, and what to do to get it?
Debian Programming :: Compiling Nautilus-dropbox For PowerPC
Jan 17, 2015I am wanting to get be able to upload and get stuff from dropbox on my powerpc install of wheezy. Debian does not have the app for powerpc machine in stable or testing. There is a thunar extension in sid but i do not want to risk breaking my system so I decided to grab the wheezy source and compile myself. I am sure I have all the dependencies however I am I am getting this error. See below
rican-linux@debian-ppc:~/Build/source/nautilus-dropbox-1.4.0$ debuild -us -uc
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: source package nautilus-dropbox
dpkg-buildpackage: source version 1.4.0-3
dpkg-buildpackage: source changed by Raphaël Hertzog <hertzog@debian.org>
[Code] .....
General :: Gcc Compiler Is Not Compiling Old C Programming Files Because Of Timestamp?
Nov 20, 2010I am using makefile to complile all C Programming files. But certain files are not getting compiled and hence its object file is not getting generated. This is happening due to files haven't been modified for a long time. It seems that compiler knows that its object file is there hence no need to complie it actually it is not.
View 14 Replies View RelatedProgramming :: Error Messages Generated When Compiling C++ Code?
Jul 3, 2010Is there an online resource to lookup error messages generated when compiling C++ code?
View 5 Replies View RelatedProgramming :: Test New System Call Before Compiling Kernel?
Apr 2, 2009I want to test my system call that be goint to add to kernel, But when i finish compiling kernel, i found my system call code not work. the code i want to return the system time "struct timespec":
/*----------Start of mycall.c----------*/
#include <linux/linkage.h>
#include <linux/time.h>
#include <linux/kernel.h>
[code]....
so i want a method to test the new system call before compiling kernel.
Programming :: Compiling A C++ Program Including Libpq-fe.h Using Cygwin
Sep 16, 2010Compiling a C++ program including libpq-fe.h by the command Code: g++ -I/usr/include -L/lib -lpq my_program.cpp for access to a PostgreSQL database results in the error Code: undefined reference to '_PQconnectdb'
View 4 Replies View RelatedProgramming :: Compiling Sample LDAP Plug-in On RHDS?
Feb 24, 2010I am writing an sample LDAP Plug-in on RHDS. While compiling plug-in file, i am getting an error related to missing header files(prtypes.h, prprf.h etc..) 'slapi-plugin.h' file is generated in the path /usr/include/dirsrv. But inside this file, they are using some other header files like prtypes.h, prprf.h, etc. But there is no files generated with this names. Because of this i am getting "No such file or directory" error for these files. I can get these header files from Netscape coporation(Thirdpary), but can we use the same header files for Redhat or is there any separate header files are there for RHDS.
View 1 Replies View Related
