Programming :: Shell Scripting: Trying To Combine Upload And Download Totals From Txt File By Ip Add

Sep 6, 2010

I have two files, uploads.txt and downloads.txt. I would like to combine the columns of these files based on the ip address. How can I best do this?

Uploads.txt Code: 192.168.0.147 1565369
192.168.0.13 1664855
192.168.0.6 1332868 Downloads.txt Code: 192.168.0.147 9838820

[code]...

View 7 Replies


ADVERTISEMENT

Programming :: NSH Shell Scripting \ The Value For The Vatriable Would Be Coming From A File With Three Columns?

Jun 24, 2011

I'm writing a script and I have doubts on how to assign values to an already established variable. The value for the vatriable would be coming from a file with three columns. I'm using the awk command for this. Am I doing it correctly? which of the following two ways is the better one or if both are wrong which one should I use?

#!/bin/nsh
inputfile=$1
rolename=$2

[code]....

View 2 Replies View Related

Programming :: Finding Maximum Length File In A Directory Recursively Using Shell Scripting?

Nov 8, 2010

I want to find maximum length file in a given directory. It should search recursivley. I want this to be done using ls and simple looping constructs.

View 6 Replies View Related

Programming :: Shell Scripting / Create A Shell Script Similar To Ls?

Jun 5, 2011

I am trying to create a shell script similar to ls, but which only lists directories. I have the first half working (no argument version), but trying to make it accept an argument, I am failing. My logic is sound I think, but I'm missing something on the syntax.

Code:
if [ $# -eq 0 ] ; then
d=`pwd`
for i in * ; do
if test -d $d/$i ; then
echo "$i:"
code....

View 10 Replies View Related

Programming :: Shell Scripting Array - Bad Substitution

Jun 19, 2009

I made a little rsync script for log transfer.

Code:
SERVERS=(SERVER1 SERVER2 SERVER3)
SERVER1_SERV=(web ftp mail)
SERVER2_SERV=(web transcoding)
SERVER3_SERV=(web ftp mail)
for SERVER in ${SERVERS[@]}
do
echo "Starting tranfer for server $SERVER"
for SERVICE in ${$SERVER_$SERVICE[@]}
do
something_to_be_done
fi
done
But when I run it I get ${$SERVER_$SERVICE[@]}: bad substitution

View 5 Replies View Related

Programming :: Shell Scripting: How To Create A User

Sep 5, 2010

How do I create a user account in a shell script? I know this may sound n00bish to you, but I know it's more than just mkdir-ing the home directory and subdirectories.

View 7 Replies View Related

Programming :: Convert String Into An Integre In Shell Scripting?

Dec 2, 2010

I need to part a string into separate integers ....like "0x0-0xffffffff,0x20000" into 3 integers 0x0 and 0xfffffff and 0x20000.... i can't use any other high-level languages ..

View 3 Replies View Related

Programming :: CGI Shell Scripting : Possible To Call Function From Other Script?

Mar 15, 2011

I got two cgi shell scripting files. Is it possible when i am in file 1, to call a function from file 2?

View 2 Replies View Related

Programming :: Compare Two Files Using Perl Or Shell Scripting?

Mar 8, 2010

I want to compare the following two tab-delimited .txt files (both were subsets of the original files) by comparing Columns 3 and 4 simultaneously. It is easy to compare C3 because both C3s are just numbers. But how to compare C4s?Basically, in File1, "G,G" = G in File2, "C,C" = C in File2, "A,A" = A in File2, "T,T"= T in File2.In File2, A/T in Column4 just equals "A,T" or "T,A" in Column4 of File1. C/T in Column4 just equals "C,T" or "T,C" in Column4 of File1, and etc.

File1:

C1C2 C3C4
ih509rs12345467244750"G,G"
ih499rs6049687244911"C,C"
ih508- 7244977"A,A"

[code]....

View 2 Replies View Related

Programming :: Ignore Case In If Statement Shell Scripting

Feb 3, 2010

How do i make my strings case-insensitive while comparing them with an if statement?

View 2 Replies View Related

Programming :: QNX Checksum Call In Cgi Shell Scripting Not Working?

Mar 11, 2011

I have a QNX machine with a slinger webserver running on it. With a cgi script i'm trying to do the QNX cksum call and compare it's output value with a fixed output. When i execute the script at the command line it works perfect, but when execute this script by by the webserver in my browser it doesn't work. Here's my code:

#!/bin/sh
FILE="/home/checkfile"
ORIGCHECK="1712885500"

[code].....

Could it be possible that i'm not allowed to do the cksum call in combination with the slinger webserver?

View 4 Replies View Related

Programming :: Shell Scripting: Scraping Public IP And Emailing?

Jul 3, 2011

so I wrote a simple script to scrape whatsmyip.org for my public IP address and then email it to me if it has changed. I set this up as a cron job ever 30mins.the problem is, it works for about 18 hours and then will have an issue where it says "line 33: [: too many arguments" Which line 33 happens to be my if statement. Now like I said it works fine for about 18 hours, i run the script with 2>&1 to a .out file so i can see what its doing...this is the output of the .out file, the "xxx" does actually show the ip.."PHP Code:

xxx.xxx.xxx.xxx
already in file
xxx.xxx.xxx.xxx

[code]....

View 14 Replies View Related

Programming :: PHP - Upload And Download Files

Jun 1, 2011

I want to know what is the best way/practice to let users upload and download files? I want to be able to let the user upload a file, list all the files uploaded, and allow him to download any file from that list, also delete a file. To my understanding I can make a php script to let them do this and the uploaded files are in a specific folder in the server or I can insert the files into a SQL table. Which direction should I go, let them directly upload the files to a specific folder (no SQL involve), or upload the files into a SQL table?

View 1 Replies View Related

General :: Combine Bash Scripting With Apache?

Apr 3, 2011

how to combine bash scripting with apache.

View 5 Replies View Related

General :: Shell Scripting - For Each File In Directory

May 2, 2011

I am working on some homework, however i am not here to be spoon fed. I am trying to get the numerical modification date of each file in a folder. Ie lets say there is a file called bob and it was modified 2006-11-23. i want to get it into a variable as 20061123.

Now i currently have this code:

Code:

However for some reason my output is:

Quote:

See how the 2011 has been placed next to it? i ran it with -x and saw this:

Code:

However i do not know how to find a way around this?

View 11 Replies View Related

Programming :: C-shell Scripting Syntax Error When Defining Two Variables A1 And A2

Apr 5, 2011

I am trying to modify a script for research purposes and am having difficulty here as I have little prior experience with C-shell scripting.

The script looks as follows (it includes tcl commands like runFEP that you can ignore)

#!/bin/bash

for ((old=1, new=2; old<=4; old++,new++))
a1=${old}%50
a2=${new}%50
do
cat > input${new}.conf <<EOF
${a1}
code....

My question: I keep getting a syntax error when defining my two variables a1 and a2. I essentially need these variables to be
a1 = value of variable old divided by 50
a2 = value of variable new divided by 50

View 1 Replies View Related

Programming :: Shell Scripting For Accepting Input From Different Directories Automatically

Nov 6, 2010

The two shell scripts (t1prog and t2prog) are given below they are working fine. The input for the first program is 't1.det' and for second program is 't1.rnaml'. These two input files are in 'dir1' folder. I am executing the shell like 'sh t1prog > t1out' and 'sh t2prog > t2out' from this directory only. Then I am executing a java program 'java RNA'; for this, t1out and t2out are input files used in the program and I am getting the final output on screen.

The input files 't1.det' and 't1.rnaml' are in different folders with same name and with different values. Each folder specifies one gene sequence input files.

In mfold directory there are 5 directors and each directory contains these input files as shown below
cd mfold
dir1 dir2 dir3 dir4 dir5
cd dir1
t1.det t1.rnaml

[Code].....

for inputs in different directories and executing these and redirecting the final ouput after executing 'java RNA' statement to a file is needed.

View 2 Replies View Related

Programming :: Shell Scripting - Value Disappears Depending On Argument Order

Mar 21, 2011

Examples:
Code:
$ ./test.sh -a -c 2
operator is -gt
remcount is
^ value missing!

Code:
$ ./test.sh -b -c 2
operator is -lt
remcount is
^ value missing!

Yet when "-c" is the first argument, its value is present:
Code:
$ ./test.sh -c 2 -b
operator is -lt
remcount is 2
What could I do to ensure the value of "-c" is picked up regardless of the argument order?

View 5 Replies View Related

General :: Shell Scripting Text File Creation ?

Feb 16, 2011

I'm just starting out with shell-scripting, but having a problem with making new text files with the touch or cat > commands.

What I've been doing is touch testfile1.txt

Also, I've tried cat > testfile1.txt (text)

Console reports "bash: text1.txt: No such file or directory. Consfusingly, it works fine in the home-directory. But if I move the file to where I want it, I can no longer view, edit, etc. it.

View 1 Replies View Related

Programming :: Shell Scripting Loop Error Yal2361: Command Not Found?

Jul 22, 2011

I have written the following script in my linux server to add users for LDAP database.But i can't able to run this.

The script is as following

#!/bin/bash
echo "Mention the username which you want to convert LDIF format"
read username
if ["$username" -e "/ldiffile/passwd"]; then
echo "Username already exists"
else
cat /etc/passwd | grep -i "$username" >> /ldiffile/passwd
fi
The output which i got :
. ldapadd.sh
Mention the username which you want to convert LDIF format
yal2361
-bash: [yal2361: command not found

please let me know where need to change and what

View 5 Replies View Related

General :: Delete A File On A Remote Server Using Shell Scripting?

Jul 18, 2010

delete a file on a remote server using shell scripting.

View 14 Replies View Related

General :: Shell Scripting: Inserting Text Into A File Name With A Predictable Pattern

Apr 18, 2011

Just using shell scripting, how can I insert text into the middle of a file name. The file has a predictable pattern, let's say 3 letters and 3 numbers and I want to insert text in the middle of those 2 patterns. Say ABC123 is the file name. As a result, the file name should be ABC.blah.123

View 2 Replies View Related

Fedora :: Create A Shell Script File With Two Functions - Bash Scripting & /etc/bashrc

Oct 6, 2010

how come I can create a shell script file with two functions, I can execute the file, but when running declare -f, the functions are not on memory, and when invoking the function bash returns invalid. In the other hand, I can copy & paste the two functions at the end of my /etc/bashrc file.... then I can called the function by name.... and the commands within that function run on my session. here is a print of all my bash packets:

[Code]....

Does Fedora has restrictions on shell scripting? I haven't touch bash in seven years, so if things have change on it I'm behind on it, and sorry for my ignorance.

View 1 Replies View Related

Software :: Export A Variable To Parent Shell In Shell Scripting?

May 21, 2009

Is there a way to export a variable to parent shell in shell scripting ?

View 3 Replies View Related

Programming :: Bash Shell Scripting / Using The Sort Command To Sort The Top 5 CPU Processes?

Feb 28, 2010

What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?

View 2 Replies View Related

Programming :: Upload A File With Cgi C?

Jul 12, 2011

i am trying to upload a file with cgi. I have an html code like below :

<table class=upload>
<form method='POST' enctype='multipart/form-data' action='upload.cgi'>
<input name=upfile type=file ><br>
<br> <input type=submit value=Press> to upload the file!</form>
</table><br>

I am trying to get the file with upload.cgi and execute a linux command in linux but i do not know how to. I use C code for that. Can you help me,please? How can i know the file from html in cgi C code?

View 2 Replies View Related

Programming :: Bash Scripting: Menu From File?

May 29, 2011

I have a file called list.txt with on word on each line that changes in length. I'd like to make a menu, each line being its own choice. I pieced together most of it the only thing missing is a failsafe for typing a number out of range

Code:
#!/bin/bash
p=`cat list.txt | awk '{print$1}'`

[code]....

View 2 Replies View Related

Programming :: Php File Upload Rename?

Apr 12, 2011

About php upload. I want a php upload script that renames and overwrite every uploaded file as onscreen.jpg I googled it but only found random number rename. Not working for me I want file name change and overwriting file on server.

View 8 Replies View Related

Programming :: Upload .cgi File To Webpage?

Apr 21, 2011

The software Nagios uses .cgi files to show a lot of things.. services, hosts, etc etc. Is there any way to pick up those .cgi files and import them to other web page? how to do it?

View 2 Replies View Related

Programming :: Bash Scripting With File Date Comparison?

Mar 23, 2011

I need to be able to compare a file date with system date and delete files older than 30 days.

the file name is basically
error_log.03222011

of course the extension is the date the file was created.

Oh and before i get hammered I looked everywhere but am unable to make sense of what I found.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved