Programming :: QNX Checksum Call In Cgi Shell Scripting Not Working?
Mar 11, 2011
I have a QNX machine with a slinger webserver running on it. With a cgi script i'm trying to do the QNX cksum call and compare it's output value with a fixed output. When i execute the script at the command line it works perfect, but when execute this script by by the webserver in my browser it doesn't work. Here's my code:
I am trying to create a shell script similar to ls, but which only lists directories. I have the first half working (no argument version), but trying to make it accept an argument, I am failing. My logic is sound I think, but I'm missing something on the syntax.
Code: if [ $# -eq 0 ] ; then d=`pwd` for i in * ; do if test -d $d/$i ; then echo "$i:" code....
Code: SERVERS=(SERVER1 SERVER2 SERVER3) SERVER1_SERV=(web ftp mail) SERVER2_SERV=(web transcoding) SERVER3_SERV=(web ftp mail) for SERVER in ${SERVERS[@]} do echo "Starting tranfer for server $SERVER" for SERVICE in ${$SERVER_$SERVICE[@]} do something_to_be_done fi done But when I run it I get ${$SERVER_$SERVICE[@]}: bad substitution
How do I create a user account in a shell script? I know this may sound n00bish to you, but I know it's more than just mkdir-ing the home directory and subdirectories.
I need to part a string into separate integers ....like "0x0-0xffffffff,0x20000" into 3 integers 0x0 and 0xfffffff and 0x20000.... i can't use any other high-level languages ..
I want to compare the following two tab-delimited .txt files (both were subsets of the original files) by comparing Columns 3 and 4 simultaneously. It is easy to compare C3 because both C3s are just numbers. But how to compare C4s?Basically, in File1, "G,G" = G in File2, "C,C" = C in File2, "A,A" = A in File2, "T,T"= T in File2.In File2, A/T in Column4 just equals "A,T" or "T,A" in Column4 of File1. C/T in Column4 just equals "C,T" or "T,C" in Column4 of File1, and etc.
so I wrote a simple script to scrape whatsmyip.org for my public IP address and then email it to me if it has changed. I set this up as a cron job ever 30mins.the problem is, it works for about 18 hours and then will have an issue where it says "line 33: [: too many arguments" Which line 33 happens to be my if statement. Now like I said it works fine for about 18 hours, i run the script with 2>&1 to a .out file so i can see what its doing...this is the output of the .out file, the "xxx" does actually show the ip.."PHP Code:
i used ldap for authentication.now i have a perl script that users use it for login(contact.pl),then this script calls a shell script(ip.sh) for create iptables chain.
when i call that into contact.pl ,it just prints: usr/sbin/iptables but ip chains didn't change.what is problem? whenever run ip.sh in bash it works correctly
I am trying to modify a script for research purposes and am having difficulty here as I have little prior experience with C-shell scripting.
The script looks as follows (it includes tcl commands like runFEP that you can ignore)
#!/bin/bash
for ((old=1, new=2; old<=4; old++,new++)) a1=${old}%50 a2=${new}%50 do cat > input${new}.conf <<EOF ${a1} code....
My question: I keep getting a syntax error when defining my two variables a1 and a2. I essentially need these variables to be a1 = value of variable old divided by 50 a2 = value of variable new divided by 50
I'm writing a script and I have doubts on how to assign values to an already established variable. The value for the vatriable would be coming from a file with three columns. I'm using the awk command for this. Am I doing it correctly? which of the following two ways is the better one or if both are wrong which one should I use?
The two shell scripts (t1prog and t2prog) are given below they are working fine. The input for the first program is 't1.det' and for second program is 't1.rnaml'. These two input files are in 'dir1' folder. I am executing the shell like 'sh t1prog > t1out' and 'sh t2prog > t2out' from this directory only. Then I am executing a java program 'java RNA'; for this, t1out and t2out are input files used in the program and I am getting the final output on screen.
The input files 't1.det' and 't1.rnaml' are in different folders with same name and with different values. Each folder specifies one gene sequence input files.
In mfold directory there are 5 directors and each directory contains these input files as shown below cd mfold dir1 dir2 dir3 dir4 dir5 cd dir1 t1.det t1.rnaml
[Code].....
for inputs in different directories and executing these and redirecting the final ouput after executing 'java RNA' statement to a file is needed.
Examples: Code: $ ./test.sh -a -c 2 operator is -gt remcount is ^ value missing!
Code: $ ./test.sh -b -c 2 operator is -lt remcount is ^ value missing!
Yet when "-c" is the first argument, its value is present: Code: $ ./test.sh -c 2 -b operator is -lt remcount is 2 What could I do to ensure the value of "-c" is picked up regardless of the argument order?
I am trying a scenario for calling a shell script when ever a trigger is called. Can some one guide me how to achieve this scenario. Also it should passes the value from the table to the shell script. Can some one explain me along with the example.
I have written the following script in my linux server to add users for LDAP database.But i can't able to run this.
The script is as following
#!/bin/bash echo "Mention the username which you want to convert LDIF format" read username if ["$username" -e "/ldiffile/passwd"]; then echo "Username already exists" else cat /etc/passwd | grep -i "$username" >> /ldiffile/passwd fi The output which i got : . ldapadd.sh Mention the username which you want to convert LDIF format yal2361 -bash: [yal2361: command not found
What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?
I have the following code: Code: #include <stdio.h> #include <stdlib.h> int main() { system("ps -ef | grep myprocessname"); return 0; }
When I run this program it outputs the following list of running processes: Code: root 10279 10275 0 13:02 ? 00:00:00 myprocessname myvar1=value1 myvar2=value2 root 10341 10337 1 13:02 ? 00:00:00 myprocessname myvar1=value1 myvar2=value2
What I want to really do is instead of writing the output to screen I want to read the output and parse the various values value1, value2 etc. What is the best way to do this?
I am a bit confused with the first line while writing a shell script , if someone can please explain me the meaning of the first line " #!/bin/bash "the confusion for me is the # at the beginning , in shell scripting # means a comment. but in this case it loads the shell which the script must use,instead of commenting the line how is this possible. where is this defined , any particular file.
How do i find out if a particular item is a file or a folder through the terminal ls -la gives 'd' before the permissions for every folder and '-' before every fileLike i want to write a script that backup data if it is a folder and deletes if it is a file
I am trying to learn more about global expressions and how it is needed in changing stuff in vi and in shell scipting in general.My question is basic:
How can I add a " # " pound sign at the beginning of every line in a file. So if I want to remark out every line in a file, what would be the global expression for that? Is there a global expression cheat sheet?
I am working on some homework, however i am not here to be spoon fed. I am trying to get the numerical modification date of each file in a folder. Ie lets say there is a file called bob and it was modified 2006-11-23. i want to get it into a variable as 20061123.
Now i currently have this code:
Code:
However for some reason my output is:
Quote:
See how the 2011 has been placed next to it? i ran it with -x and saw this:
Code:
However i do not know how to find a way around this?
