Suse 11.3 I have a RW DVD I am trying to write to. As root I invoked "dvd+rw-format -blank /dev/sr0" and it completed. If I fire up k3b it tells me I have a blank RW DVD. But when I invoke (as root) "dd if=ionmichs_JeOS.i686-0.0.3.raw of=/dev/sr0 bs=4M" it fails with error "dd: writing `/dev/sr0': No space left on device 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.0162092 s, 0.0 kB/s"
View 2 RepliesWe had a perfectly working SUSE OES netware server for some months, and wanted to create a new image backup. Using Acronis Backup and Recovery Advanced Server Software. This worked a treat on our SBS 2008 Server. We went to run it for Novell OES and a system lock up occurred and services such as Iprint then disabled. A server restart recovered the server after a few attempts. We then learnt that the server could not write files to an NTFS formatted USB drive. This was the ideal destination to test the backup. However we could not even write a simple file to the drive without an error message about permissions.
We then learnt that Linux needs a package called NTFS-3G to enable NTFS writing permissions. This did fix the writing issues. We attempted to run another back up which again failed, bringing down the server. We again attempted to reboot the server this time we fail to get to the graphical user login. At the suse Linux Enterprise boot screen we select "boot from hard disc". Which fails immediately with "GDM could not write a new authorisation entry to disk...Error no space left on drive". When the boot eventually continues, a number of things fail with the same message about "No space left on device".
The next message starts "Could not start the X server due to some internal error."
Further to the above, starting "recovery" instead, the checks of partition fail and it seems obvious that the partition definitions have become corrupted. In the expert partion manager the lines for partitions seem correct except that there are no entries for 'mount point' and 'mount by' columns. Trying to edit these lines does not appear to allow entries for mount point or mount by - they are disabled. It seems likely the server is not mounting some partitions at boot which is why the kernel thinks the server is full. Is there some simple way we can use say fdisk to repair the partition definition without loosing anything of the server OS and data ?
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
I've a physical machine with FC9 running vmware server 1.0.6 with 2 virtual machines. Each virtual machine is also running FC9. Everything was running smoothly until one day, one virtual machine stop. I've checked /var/log/messages of that machine and it says:
Code:
"no space left on device"
.
I try to create a file
Code:
touch dd
and the answer is the same.
The odd thing about all this is that the machine (both virtual and physical) have enough space left. This is the space available reported by df -h. Physical machine
Code:
[root@halwifi hotspot]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
228G 38G 179G 18% /
/dev/sda1 190M 19M 162M 11% /boot
tmpfs 1010M 96K 1010M 1% /dev/shm
and the Virtual Machine
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
8.7G 3.6G 4.7G 44% /
/dev/sda1 190M 19M 162M 11% /boot
tmpfs 379M 0 379M 0% /dev/shm
Every time I try to do something, I always get: "no space left on device".
Total Newbie running Win 7, Lucid Lynx 64-bit, sharing partitionUbuntu keeps reporting low disk space. I've read dozens of postings, looked at gparted and done some resizing but it's still not right. Had to remove everything I could last night to free up space.Disk utility shows I have an 18 GB root.disk, gparted shows partition has 204 GB available.The space is there in the partition how do I get root size to increase?
View 9 Replies View RelatedI am trying to transfer 3 AVI files of about 650MB each to a video DVD to be used standalone in a DVD player with TV. When I start creating the Video DVD project, I drag my 2GB of files into the project window, Brasero recognizes the blank DVD as having 4GB, but then reports there is insufficient space to burn the selected files and do I want to use multiple discs. Running Ubuntu 10.04, and have accepted all automatic updates as they come out.
View 4 Replies View RelatedAlthough I've seen several threads with the same problem, I have not managed to solve the problem. GParted identifies my /dev/sda as unallocated disk space! The machine a Dell Inspiron M101Z laptop running Ubuntu 10.10 32 bit + W7 64 bit. I wouldn't have discovered the problem until I decided to replace my 32 bit Ubuntu with the 64 bit version, then GParted from the live cd identified my drive as Unallocated space!
I've already tried to use testdisk to write the partition table, but though it writes the table successfully and then it prompts to reboot, GParted still sees it as Unallocated. I've also tried fdisk /dev/sda then p then w to write the partition table, but again GParted screws up for some reason and sees it as Unallocated.
Code:
cp: writing `/tmp/tmpX2KZDc/system.image': No space left on device However, when I right-click on properties, I see it has 51 items, totalling only 130.5 KB!this is a dual boot system with Win XP and Ubuntu 10.10 (~58Gb partition)Quote:
anil@anil-HP-EliteBook-8440p:/tmp$ mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
[code]...
I just tried to download a torrent and got an error message indicating there was no space left in the download location I'd specified.
This happened earlier when df -h showed ~900M of free space. Just now, I'm showing ~2.2G of free space. Anyone have ideas what could be causing this?
We are using thin client systems in our work environment. There is a central ubuntu server and by using thin clients, we are connecting to our homes. The problem is when I try to install an application, it reported me that I had 200 mb of disk space. But when i try to look from console, I see that /home folder has over 250 gb s of disk space. Even when I try to look from baobab, Disk Usage Analyzer in Ubuntu, i see that my home file system is full.
So what's the reason that I am receiving different kinds of disk space report from different sources? Our system admin here told me that some applications foolishly try to see the physical devices on the thin client and got confused as a result. Is this true?
df -h [URL] I did the following command to find everything is in /usr or /var, then tracked it down to /usr/lib and /usr/share as the main offenders, but out of all the directories none are more than 1mb or so.
du -sh /* | sort -gr | head -n 5
I tried to uninstall firefox, which is what got me in this mess in the first place, the log claims it will remove ~240 mb but failes on a "E: Write error - write (28 No space left on device)" [URL] If I could juggle something onto an external hard drive so I can uninstall firefox I would be out of the wood. Failing that I believe a new install is in order.
I would like to use two monitors with my desktop, so connected them the other day and it worked straight away, which is good but... The monitor configuration app always want the primary monitor to be on the left hand side, thus it always extend my desktop right. Can I do anything to extend my desktop to the left instead of to the right so I can have background application on the screen to the left?
View 8 Replies View RelatedI have an WD 1TB external hard disk. When I try to write any file to it - even a 1kb text file - I get the message "no space left on device". I cannot write to the disk at all anymore - not files, not directories.The drive is formatted as an NTFS drive. I use F13. I can read from the drive without any apparent problem. Would anyone know what's causing this problem?
View 2 Replies View RelatedI am trying to copy some files onto a flash card. The first thing that i do is mount to the flash card:
mount /dev/sdc1 /mnt
then i try and copy a file
cp dev.bin /mnt
but i get a message saying:
cp: writing `/mnt/dev.bin': No space left on device
I was able to copy some files before but i cant seem to do it anymore.
how can i delete everything thats on the flash card so that i can copy files onto it?
Debian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 81G 27G 50G 35% /
devtmpfs 16G 0 16G 0% /dev
tmpfs 16G 76K 16G 1% /dev/shm
tmpfs 16G 18M 16G 1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem Size Used Avail Use% Mounted on
/dev/dm-0 907G 6.6G 855G 1% /
udev 10M 0 10M 0% /dev
tmpfs 995M 9.2M 986M 1% /run
tmpfs 2.5G 76K 2.5G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 2.5G 0 2.5G 0% /sys/fs/cgroup
[code]...
I recently upgraded from Lucid to Maverick, which went fairly smooth. Then I upped my RAM with some new memory sticks (4Gb to 8Gb). Since about then, I'm seeing these errors in syslog:
Code:
Jun 6 22:23:52 howler console-kit-daemon[1224]: WARNING: Failed to add monitor on '/dev/tty2': No space left on device
Jun 6 22:23:59 howler console-kit-daemon[1224]: WARNING: Failed to add monitor on '/dev/pts/0': No space left on device
I also get errors when running "tail -f" as root:
Code:
tail: cannot watch `/var/log/syslog': No space left on device
I searched around and I found some other reports of the tail -f error, with the suggestion of increasing fs.inotify.max_user_watches. I set it to 16384, and that at first resolved the tail -f problem, but now I'm getting that error again even after upping max_user_watches.
I know swap is suggested to be approx. the same size as RAM, but with this upgrade RAM is now bigger than the 5.7G of swap.
i'm using Ubuntu virtual machine.latly, i've moved the VM image to other PC. something with the user privileges got wrong. i when i edit a file using nano for example from a simple user, it says: "no space left on device" but when i use
# sudo nano filename
it works.i used
#chmod 777 filename
and it still dosent work. i cant save/write to disk while i'm in the user account. but with sudo, or root account it works.
You would think it would be easy to do this (and essential to maximizing and predicting the usage of tapes), but apparently this isn't so. The program MT(1) actually had some commands that give the block positition (if supported by the drive) from which the remaining space could be deduced (even if you couldn't predict exactly how much space the next archive would take up). However I'm using MT(1L) which no longer has such commands.
View 1 Replies View RelatedE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Yes I tried 'sudo dpkg --configure -a' Should I do a reinstall.
"Setting up initramfs-tools (0.92bubuntu53) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.31-17-generic
gzip: stdout: No space left on device update-initramfs: failed for /boot/initrd.img-2.6.31-17-generic dpkg: subprocess installed post-installation script returned error exit status 1"
I've just upgraded to kubuntu 9.10, and I'm getting strange errors when trying to copy files onto my MP3 player, a SANSA M250 (2GB). df claims it's at 57% capacity (and the figures make sense for that, as well as having about the quantity of music which half fills the SANSA) but when I try to copy a file - from the command line, from exaile, or with the file manager, I get a "No space left on device" error:
Code:
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 73939452 42184580 27998880 61% /
udev 512472 264 512208 1% /dev
none 512472 1752 510720 1% /dev/shm
none 512472 96 512376 1% /var/run
none 512472 0 512472 0% /var/lock
none 512472 0 512472 0% /lib/init/rw
/dev/sdc 1996000 1125056 870944 57% /media/SANSA M250
$ cp test.mp3 /media/SANSA M250/
CP: cannot create regular file `/media/SANSA M250/test.mp3': No space left on device
The MP3 being copied is 2MB in size so should fit easily.
There were no problems until upgrading, when I also moved from amarok to exaile - because amarok2 doesn't have the functionality I want from a player. But this happens even if exaile isn't running, so exaile shouldn't be the problem. How can I diagnose what's going on?
If I run low on free space, and I/system need to write something, then the files are just truncated. With no way to revert to their previous content.
First I installed the Windows on the VirtualBox, it sucked up all free space, so I couldn't even login to the system afterwards.
Then I, once again, silently ran out of free space, and my php editor broke. Later I discovered that it tried to write its config files, but failed, truncating them all. I lost a half a year of configurations, custom color scheme and custom code snippets.
Then one day the system just froze. Later I understood, there wasn't enough free space for it to run.
Today I was working on my php script, for like the second day, when, again, free space ran out, so with another file-save, I got a wonderfully impressing blank php-file. It was auto-reloaded from the external change, which was failure to write to file, obviously, so no ctrl-z worked, leaving me with two days work wasted and an urge to hit the monitor
My questions are:
1 How can this be fixed? Besides the obvious awesome fix "watch your free space, buddy".
2 Could somebody explain why these sorts of things happen, just so I know why the ultra-safe and durable 'nix operating system wants to destroy itself sometimes?
3 Anyone else encountered this issue?
So i am using xubuntu from wubi and i need more space to instal all the important security updates, How do i free up space? i think i made a mistake and did not allow it much space when i made the partition for it
View 4 Replies View RelatedThe wubi install of Ubuntu is saying it only has 125 MB left. I gave the install 10 GB to start with. I know the OS takes about 3 GB and I didn't install 7 GB worth applications. I'm thinking some how it confused itself. I've done run the Disk Analysis And it's rather confusing, but it seems to be looking at more then its alloted 10 GB.
View 6 Replies View RelatedI was saving a few pictures, and I realized that none of them were actually being saved. I went to my home folder and I noticed that I only had 0 bytes left, then I deleted everything in my trash, got some space back, then it disappeared.
View 3 Replies View RelatedI am trying to write to a Ramdisk because I suffer from terrible IO speeds on my VPS. It uses openVZ and I run a Centos 5 distro.
So i created my ramdisk with '/bin/mount -t tmpfs -o size=1G,nr_inodes=10k,mode=0775,noatime,nodiratime tmpfs /tmp'
but whenever I try and copy files to it, it just spams me with 'no space left on device even though there is!
Here is the output of df:
/dev/simfs 157286400 6511452 150774948 5% /
none 16441412 4 16441408 1% /dev
tmpfs 5242880 1296 5241584 1% /disk/test
tmpfs 5242880 1296 5241584 1% /disk/test
[Code]....
I have a lvm with 5 disk, I've been doing some benchmarks on the file-system with this lvm know I would like to remove one pv from the volume, I've tried
Code:
# pvmove -v /dev/sde1
Finding volume group "test-vol"
No extents available for allocation
and also
[Code]....
I'm running CentOS 5.2,on a 64-bit x86_64 Linux machine with kernel version 2.6.18-128.el5 smp. I appear to have version 2.9.4 of xfsprogs. I have a 22TB xfs filesystem ,Yesterday, the hard disk is full, today released a 7.7T disk space.But still can not write to new file. software ambience:
[root@Production data5]# uname -a
Linux Production 2.6.18-128.el5 #1 SMP Wed Jan 21 10:41:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[code]....
I got the following task from my boss. I have to find out if there is some alternative tool for create reports from Squid except SARG. Now, we use SARG, but my boss told to me, that the main problem of SARG is, that SARG generate huge amount files, which cause problems during migration our servers. He told to me the following condition for change of current tool (SARG):
* standard package of Debian
* generate less amount of files, optimal is to save reports to the database
So I would like to ask you if you know about some tool (I can not find some by google)... and the best would be if you told to me some practical experiences.
successfully upgraded to Fedora 13 from Fedora 12
then did yum update with plenty of problems
then I tried
yum --skip-broken update
883 entries
1.3 gig download
delta download was 5.9 meg
[Code]....
I have noticed that the initial ordering of icons of my desktop is leaving a blank space on the top left corner. Recently I have changed my language but I am not sure when this began to happen.
View 7 Replies View Related