Today, I started having a problem with the "System Settings" audio option. Basically, when I go to Personal Settings -->Multimedia I get a crash.This also means that I am not getting sound correctly.
View 8 Replies
Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.
View 6 Replies View RelatedI use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View RelatedAbout once a day, my system seems to hang (mouse can't be moved, no keyboard input possible, screen stays unchanged)
After a restart I can find an error in /var/log/kdm.log:
Code:
X.Org X Server 1.9.3
Release Date: 2010-12-13
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code].....
My system just crashed and I had to reboot. The only interesting message I have found in the logs before the crash was :
Code:
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 114 to 115
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 61 to 60
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 40
[Code]...
I recently installed openSuse 11.2 KDE in a Dell 1535 laptop.
I tried to enable the Cube desktop feature through desktop settings and when I pressed the apply button the system crashed. The screen freezed and the laptop wasn't responding to anything.
So I rebooted the laptop and now every time gets stack in the green screen and trying to load but it never does. I suspect that it has to do with my ATI card because a couple of 3d games would crash the system too. I tried some solutions that I found here like disabling the desktop effects by tweaking kwinrc file but it didn't worked.
Does anyone know how to disable that Cube feature from failsafe mode?
I have upgraded my laptop to OpenSuse 11.2 few weeks ago. It was fine until last Tuesday, when a system crash occurred during a kernel security update. I think something went wrong with my network connection. I was working on my code and suddenly I lost my base tools such as /bin/ls and /bin/cd. So I tried to restart and got a kernel panic as my kernel was partially broken.
I tried rescue the system, however it did not work. After that I thought I could fix it by reinstalling the OS with minimal server configuration over my existing root partition. (Since I didnt have any other computer or live cd at that time and I was rushing for a demo, I could not reinstall the missing components one by one. And reinstalling the minimal server made sense then )Almost everything went fine ( i needed to do little things like creating gdm user). Now I can use my system and all my applications. But as expected, the pre installed packages in my system now cannot be seen by YaST Software Manager. Is there a way to repopulate the package list?
Another question is, I cannot restart the computer from a Gnome session. Whenever I restart or shutdown, i go back to the login screen, then I press Ctrl+Alt+F1 which starts the restart progress. How can I fix this?
this is a continuation of my install from : my experiences installing suse ( graphics stuff was from page 3)i have two graphics cards:ATI X700 x16 pcie card in a x1 slot (one monitor, left)NVidia GTX 7800 card in a x16 slot (two monitors, centre,right)machine boots up on the ati card, and i had configured them properly in the last topic, so now the setup looks good except for when i move the mouse cursor from the Nvidia card, left, over to the Ati card. this causes the GUI to be not responsive andthe cursor is flashing, either on neither monitor or one of the two and moving the mouse decides which (so its not a complete crash, but nothing is moving in the GUI). pressing many ys on the keyboard at once seems to stop the X and goes back to the the commandline.
the last problem i had in the last topic was that the virtual screen was not defaulting at the screen resolution i set and instead defaulted at 3840x1920 and i saw the top corner of the wallpaper. moving the mouse over to the ati card would still produce a crash with the above description.occaisionally the computer would crash with the same problem accross the nvidia monitors, however it always happens between the centre and monitors.i have installed the Nvidia drivers using a install program from the SUSe and it put the relevent packages on. Ati drivers are whatever came with 11.3 (and theseected that the card has two outputs). if its the nvidia drivers i could go back... (how?) hopefully it can use the two monitors still else its better to remove the ati screen in xorg.conf
In System Settings under Appearance>Style>Fine Tuning tab there is the following setting for graphic effects. what it does and how it works because I don't seem to see any difference in the effect the settings have. By default it seems set to low display resolution and high CPU. This seems opposite to what one would expect it to be.
View 4 Replies View RelatedIt appears my profiles are gone, and thus i have got no way in changing settings in the 'Desktop Configuration' (Systems Settings)so, when I go toapp starter --> Configure Desktop --> Power Mgmtthere are NO profiles under 'global settings' or 'power profiles'anyone has got an idea what's cooking here
View 9 Replies View RelatedWhen I connect my logitech cordless optical mouse to my laptop I am unable to access it's settings under system settings. The setting options are greyed out and it says
You have a Logitech Mouse connected, and libusb was found at compile time, but it was not possible to access this mouse. This is probably caused by a permissions problem
How or where can I set the permissions so that I am able to access the mouse settings? I've googled around and found lots of references to the above message but no solutions.
The mouse is one of those optical wireless (radio) mice
Did you play too much with compiz and after-a-while you realize that certain functions are not working anymore?
Well, just follow the steps below:
Quote:
gconftool-2 --recursive-unset /apps/compiz
Then,
Quote:
Restart your PC / lappy
[URL]
Jessie 8.2
Cinnamon 2.2.16
Sound settings crash when accessed from cinnamon-settings menu:
Code: Select all$ cinnamon-settings
Could not find bluetooth module; is the cinnamon-control-center package installed?
__init__ took 79.102 ms
(cinnamon-settings.py:3856): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] .....
Segmentation fault
Here is the output when trying to open 'Sound' directly:
Code: Select all$ cinnamon-settings sound
Unknown module sound, using cinnamon-control-center
Could not find bluetooth module; is the cinnamon-control-center package installed?
(cinnamon-settings.py:3877): Gtk-WARNING **: Symbolic icon cin-audio-input-microphone-low-symbolic-ltr of size 16 is in an icon theme directory of size 128
[Code] ....
Segmentation fault
I've never been able to get bluetooth working. Installed version is:
Gnome-bluetooth (3.14.0-2)
Upgraded from v11 to 11.3Now when I'm using my voip application and open a ..... video the sound from both applications mixes. It seems also that I have less kmix control.
View 9 Replies View Relatedjava: /build/buildd/openjdk-6-6b20-1.9/build/../pulseaudio/src/native/org_classpath_icedtea_pulseaudio_Stream.c:680: Java_org_classpath_icedtea_pulseaudio_Stream_nativ e_1pa_1stream_1cork: Assertion `stream' failed.
I keep getting this error about 1-10% of the time when a Java application tries to play audio. When this happens, the whole JVM quits, which means the crash is in native code. I find it difficult to test my Java games, for obvious reasons, since I am a Java developer primarily. I use Eclipse 3.6 SR1 to develop my Java apps, and I'm a recent convert to Ubuntu from Mac OS X. EDIT: Whoops, forgot to mention that I'm running Ubuntu 10.10 "Maverick Meerkat" x86_64 version.
Right so I managed to fix this once, by installing the wine.i686 instead of the x86_64, but now it's back. So I removed the 686 package and installed the x86_64 package again, no go. I get a fairly sizey list of memory dumps. The audio is working on everything else. But winecfg keeps crashing when I click the audio tab.This is on a Packard bell with ATI chipset, an ATI tech Azalia (Intel HDA) soundcard, an AMD Turion 64x2.I'm running FC12 on the 2.6.32.11-99.fc12.x86_64 kernel, the version of wine is 1.1.38.x86_64 (right now) on kde 4.4.2
Code:
fixme:seh:execute_cfa_instructions 7fd8c47a209d: DW_CFA_remember_state not implemented
fixme:seh:execute_cfa_instructions 7fd8c47a20a0: DW_CFA_restore_state not implemented
[code]....
I have three audio devices on my system;
1. a builtin (broken)
2. an HDMI on my graphics board
3. a USB audio device (i am using this one)
I normally shut off the system each night. Next day, I have to go through the pulse-audio mixer and re-set all of the audio settings. They are apparently not being saved. I've searched the forum for 'save audio' and similar terms but no joy.
I have a triboot windows suse 11.3 stable and suse 11.3 factory pc, I would like to share the browsers and email settings between the suse stable and factory, I succeed with thunderbird and firefox moving the /home/.thunderbird and /home/.mozilla in an ext3 shared partition and linking these in the respecive /homes, I found that there isn't a /home/.chromium folder, I found probably /usr/lib64/chromium could be the same as /home/.mozilla for firefox, but I don't know if is secure or can damage my system to move this in a ext3 partition and then link this to the respective /usr/lib64/chromium, /usr/lib64/chromium has root owner, root group, visible and modifiable for root and only visible for group and other.
View 5 Replies View RelatedRunning 10.4 Luci RC 64-bit desktop and when attempting to run Applications > Sound & video > Sound recorder, I receive the following error message:
Quote:
Your audio capture settings are invalid. Please correct them with the "Sound Preferences" under the System-Preferences menu. When I do go to System > Preferences > Input, there is only 1 device - "Internal Audio Analog Stereo" with no options for modification.My laptop does have an internal microphone but it apparently isn't working as nothing was recorded when I ran a Skype test call. This is the reason why I attempted to record something to check the mic.
I have just gotten unbuntu install and was force to learn cuase while installing i accidently messed up the part of windows it needs to start i think on another hard drive.
i dont mind anymore. its a easy learn but now i down to the nitty gritty stuff.my audio outputs. i have a biostar board with reltek onboard audio.board model: TF8200 A2+ now i am just looking for a way to manage what one of the 6 ports do what.. like before in windows 7 with the realtek program. i could make every single on back their all fronts. or all line ins. or anything in between.
i dont really no what else to say. what ever other info you need just ask and ill reply fast.ps Ubuntu is awesome. its so slick with compiz and conky is nice to. only other problem i have now is music manager/player/mp3 sync. anyone know a good program off the top of your head?
I've purchased Creative sound blaster. It's external usb sound card, which worked well as I plugged it in. In sound preferences it was setted to 'Analog stereo output' in hardware, and I've accidently messed up with Connector droplist in Output bookmark. As a result - silence in my speakers. I wonder what went wrong and where to search for it. The card is worked and it is supported by ALSA. Just some settings went wrong.
View 1 Replies View RelatedI've recently encountered a sound issue and I recently installed the nvidia gt220 in my box and was thrilled at how well it worked with hdmi until I tried to use the audio. I updated my alsa and went into the alsamixer and it does detect my gt220. I unmuted all spdif and tested the sound and with success the sound test works. I know the card and device numbers that work with the audio but now sure where to make changes so it will default to that device instead of the onboard audio that it seems to try to use now. I am running lucid 10.04.
View 4 Replies View RelatedMencoder settings... I'm doing a simple transcoding of an avi file from FFmpeg MPEG4 codec to XVID MPEG-4 codec. The problem is that the audio bitrate is changing from 192 kbps to 32 kbps. The audio codec for both files is mp3 (MPEG-1 layer 3). (I'm transcoding the FFmpeg MPEG4 encoded avi because my blu-ray player doesn't see, let alone play it. Any XVID MPEG-4 encoded avi files the blu-ray player sees and plays fine). I ran mencoder trying the four settings below but the audio bitrate still comes out at 32 kbps:
Code:
mencoder camping_en.avi -ovc xvid -oac mp3lame -xvidencopts bitrate=192 -o camping_us.avi
mencoder camping_en.avi -ovc xvid -oac mp3lame -xvidencopts bitrate=687 -o camping_us.avi
mencoder camping_en.avi -ovc xvid -oac mp3lame -xvidencopts bitrate=9146 -o camping_us.avi
mencoder camping_en.avi -ovc xvid -oac mp3lame -xvidencopts bitrate=192000 -o camping_us.avi
How to keep the bitrate at 192 kbps?
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View Relatedhow can I make vlc media player remember my preset audio settings. I'd want it to start up with ska preset instead of flat nothing.
View 2 Replies View RelatedI'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies View RelatedI have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies View RelatedI'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies View Related
