I installed Debian on my NAS and I installed nfs to share the files, but I cannot mount anything over nfs with the it. it seems that I dont get the exports right.I added the IP to the hosts.allow, I added it to the exports.to make it easier, shananigen has the IP 192.168.10.33 and is the serverdebian has the IP 192.168.1.34 and is the clientis there a problem if I go across subnets?anyway, here we go
I'm trying to setup an Apache server on my computer which will allow browsing of files in a specific directory and subdirectories, without needing any sort of authentication.
I've got the Apache2 server up and running through yast, and everything works fine as long as I try to point it to the /www/htdocs folder. However, I want to point it at another folder, which is on another partition. This partition is formatted as NTFS, if that matters at all (here's some background on some permissions issues I had with the NTFS partitions recently).
When I change the "Directory" setting in the Yast http server configuration utility to the directory on the NTFS partition I wish to use, attempting to access the server results in the following error:
Code: Access Forbidden: You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster.
Error 403 192.168.1.100 Mon Jun 13 23:43:29 2011 Apache/2.2.17 (Linux/SUSE)
This should be a quick one. I'm trying to backup a single directory and it's subdirectories on my Lucid Server to a freenas box across my network. This is what I'm using to do that..
rsync -r -a -v -z * --delete freenas:dSIBackups It almost works perfectly except for one problem. When a file is deleted at the source, this command doesn't seem to delete it on the receiving end. I assumed that the --delete would do that but aparently not. Can anyone think of a reason that this would happen?
I am working on a NFS server embedded on a PowerPC plateform (4650EX, 512Ram, 1 GB Ethernet) but i can't mount my exports folders from my client. Here are messages :-- server side :
$ tail /var/log/message Dec 11 23:35:45 canyonlands mountd[1345]: authenticated mount request from 147.138.27.17:620 for /mnt/ssd (/mnt/ssd)
On a Lucid server, dnsmasq is happily running DHCP together with a local DNS; although, in setting up NFS, I seem to have a small problem... I have /etc/exports referencing the hostname of the clients but these IPs change when the DHCP lease is renewed. Unless I restart NFS or run exportfs, I cannot mount the exports on my clients. I know that it would be good to make the all the addresses static; however, I was wondering whether there is another way to configure NFS such as possibly adding in a script to continually monitor /var/lib/misc/dnsmasq.leases and re-export accordingly?
I have spent the last hour searching for a solution to this, but I can't get it to work. Here is what I am trying to do:
I have directories for different months in one folder. So for example Code: ../folder/Jan/ ../folder/Aug/ etc. Some of the folders have a dot in front of the month as so: Code: ../folder/.Sep/ ../folder/.Oct/
[Code].....
I am trying to find all the csv files EXCEPT those in a folder that has a dot. For example I want all the csv files in ../folder/Jan/ but I want none in ../folder/.Oct/.
I also want to exclude all the files in the /Aug/ folder that represent days 10-31.
Here is what I have so far: Code: find /some_path/folder/ ( ! -name "Aug[10-31]*.csv" ! -path "/.*/" -name "*.csv" ) | more This command lists all the .csv files except those in the /Aug/ files. So it just ignores the /Aug/ folder completely but lists every other .csv file.
I'm trying to compress with zip for linux utility a file
Is need to be done (example):
But I would like that in the zip file there is only one file: source.file instead the whole directory path /usr, /src,... and the file.
I can't move up to the directory /usr/src/ to execute the command.
I must do this from / directory.
If this possible? I Windows systems even if I do the zip C:directory1directory2source.zip C:directory1directory2source.file, it does what I need: a Zip in directory2 with just the file source.file.
I've been looking up the man page for zip, but did not find anything useful, tried, -j, -D with no success.
I am working on a project where I am dialing out of a modem!! Old stuff, ya, but the modem allows my device send info from remote sites from my datibase through a phone line so that this IT departments dont have to worry my device being a security issue on their networks.
Any way, the modem I'm using isn't incredibly well designed, and when a certain ascii char is read by the modem, it reads it as an EOF indicator. It is also important that the files I send are compressed.
My question is: Does anyone know of a compression format that allows ME to dissallow IT's use of certain ascii chars?
just as an illustration:
Device --------> Modem ---------> Off-site
and the Modem stops talking to the device when a certain char is passed to it.
Just trying to set up a new backup using tar, but there are a few things I dont want to include. Using --exclude I can exclude sub-directories, but how do I exclude specific files in a subdirectory that are (for instance) executables or have a specific extension?
I have a Ubuntu 10.10 box which i've developed an IPTables Firewall script and is forwarding my ports correctly. This service also runs Openswan VPN Server with 2 VPN's, which is also working well.
I have come across a small snag with excluding the multiple VPN subnets I have from the NAT on this box.
Which when added to IPTables does make the VPN come to life. But I can't seem to get it to add the second subnet. Unfortunately, I can't do a blanket exclusion such as 192.168.0.0/16 because the second VPN is on a Class B subnet address which I cannot change.
At present in my server the log folder was filled up and causing memory issue. So I am planning to write a script in such a way that the files which are older than 30 days will be deleted and also need to find the files which were not compressed and need to compress this file. Compression will exclude if the file was created on the same day.
I have tripwire 2.4.1 up and running on one of our servers, and I am now in the process of configuring it to exclude some files and/or directories that are known to change periodically between integrity checks.
I did some reading on the subject, and one file that came up was the tw.config file. However, when I did a search for the file, there was no instance of it on the server. My next thought was to modify the tw.pol file, and I did try to list some files to be excluded. However, when I tried to update the policy, I got an error message which indicated the syntax that I entered within the tw.pol file was incorrect.
If the tw.config file does not exist, can I create it, and modify the tw.pol file to indicate where the file is located on the server?
I've got the following code and kludge. It's working okay except that there's a directory called "Archive" which I don't need to backup. I've tried various combinations of &&, -a, etc., and I'm kind of at a loss for getting this right.
Here's the code I have so far:
Code: #!/bin/sh # backup subdirs as individual tarballs with prepended timestamps and # move them somewhere else. # --exclude "/path/to/dir/*" (Doesn't seem to work)
[Code]...
How can I write that line so that I can loop through all of the subdirs, tarring them up, but excluding the "Archive" subdirectory?
I am running RHEL 5.4 Server (32-bit) and have my audit.rules file set up per a template that I am required to use. There is one particular rule that audit is auditing the unlink of files. With this set, my log files are filling up very fast, as there is a particular app that constantly touches/ deletes a couple of files, which the unlink is catching. Here is the audit rule:-a always,exit -F arch=b32 -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k deleteI commented out the "-S unlink" and my logging returns to normal (as expected). For right now, I was wondering if there was a way to set this rule up to exclude these couple of files from what auditd is capturing?
Is there a way of excluding a software package when issuing the 'apt-get dist-upgrade'command? For example the newer 'pm-utils' packs are incompatible with my hardware and my laptop starts to glitch. What I do is I uninstall and replace the package every time I run 'sudo apt-get update && apt-get dist-upgrade'. Which is kind of annoying. I know that you can hide updates from the update manager, but what about the terminal? I'm sure there are codes like "dist-upgrade [except pm-utils]"
I want to search file excluding the NFS ...find / -mount -name 'filename' restricts the search only in the root disc partition,but the file can be in other partitions alsoIs there any way to exclude the NFS only.
I am running RHEL 5.4 Server (32-bit) and have my audit.rules file set up per a template that I am required to use. There is one particular rule that audit is auditing the unlink of files. With this set, my log files are filling up very fast, as there is a particular app that constantly touches/ deletes a couple of files, which the unlink is catching. Here is the audit rule:-a always,exit -F arch=b32 -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k deleteI commented out the "-S unlink" and my logging returns to normal (as expected). For right now, I was wondering if there was a way to set this rule up to exclude these couple of files from what auditd is capturing?
I am running CentOS 5.x and want to yum update, but I do not want to touch the kernel. How can I exclude the kernel update and prevent yum from removing my current kernel?
I am a squat on advanced Apache work. I would get a basic SSL functionality to work. So URL...works fine and gets me all the login windows I designed. however currently all the images and other extensions like .pdf are also using the https routing.some image referred on that https link e.g. URL...can be displayed using https but not http.I would like to JUST limit https usage to the login window html and ALL other images pdf's not secured html ( one that do not need password ) should use HTTP NOT HTTPS.
I looked through google but can't find an answer for this..... say I have a directory called "files"; this directory contains several other directories..... what I wanna do is delete ALL the files within the subdirectories, but NOT delete the subdirectory. Can this be done easily without having to run a command for each subdirectory?
