OpenSUSE Network :: Is KDE4 Really Incapable To Mount NFS Shares On Demand?
Jan 3, 2010
I have some NFS shares on a server (say Desktop) to which the client (Notebook) is not always connected to. Even the server is not always up. To mount an NFS share in the past, I had some Device-Link icons on my KDE3 desktop. That worked fine. Now, SUSE 11.2 comes with KDE4. The NFS shares are properly configured in /etc/fstab as usual (including 'users' option). And now the big question: What is the official way to mount my NFS share on demand as an ordinary
user?
Desktop icons are not KDE4ish. And the Device-Link method doesn't work either, because it apparently doesn't take care of /etc/fstab (i.e. the users option) and insists on root privileges. Also Dolphin is not able to mount NFS shares when I need it because it
simply does not show them. The only way to mount my shares is to perform the mount command in a
terminal session. But this couldn't be the truth with KDE4, isn't it?
View 7 Replies
ADVERTISEMENT
Jan 2, 2010
I have a Thecus NAS with nfs support running. Now I switched from OpenSUSE 10 to 11.2 on the client side and aren't able to mount my nfs shares. With SuSe 10.0 I didn't have any problems.
The /etc/exports:
/raid/home_nas1 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
/raid/soundandmore 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
On the client side I'm able to see the shares:
showmount -e nas1
Export list for nas1:
/raid/home_nas1 192.168.0.24/31
/raid/soundandmore 192.168.0.24/31
The client address:
inet addr:192.168.0.27
I'm using nfs-3:
mount -t nfs nas1:/raid/soundandmore/mnt
mount.nfs: access denied by server while mounting nas1:/raid/soundandmore
View 9 Replies
View Related
Apr 1, 2010
I am using the mount command to mount Windows shared folders are another machine on my LAN, to have them show up in the Linux filesystem. The command mounts the folders just fine, however the access is read-only.
In the command, I am also using the -o option to specify a username and password that should have full access. Also, I have used this identical command on my other distros and it seems to work fine. I've Googled high and low, trying to find a way to specify a Samba user/password for authentication. I know one of the other distros had a program that I could specify a Samba user/password to simulate a Windows login.
View 6 Replies
View Related
Dec 31, 2010
Using a SUSE server, what's the best method/tool available to mount existing shared directories? I have defined shares on a Window 2008 server and am attempting to configure the SUSE server.
View 8 Replies
View Related
Jun 9, 2010
I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies
View Related
Feb 1, 2011
Trying to mount a ramdisk on demand when I need one, however gksudo is griping that the command is wrong. So, what's wrong with this command?
gksudo mount -t tmpfs -o size=1024m tmpfs /mnt/ramdisk
View 3 Replies
View Related
Feb 13, 2010
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies
View Related
May 13, 2010
I've, for years, been using a little script, as user, to mount network shares, like this:
mount.cifs //server/Data ~/Data -o username=robertw
Previously it used to be smbmount, but that changed. Anyway, the latest updates have stopped me be able to run this as a user. I tried running it as root and that just won't let me get access to the shares, tells me permission denied. I thought I'd try using fstab. This gives varying degrees of success.
Here are two of the entries:
//server/CAD /mnt/CAD cifs credentials=/etc/samba/auth.server.robertw 0 0
//server/Data /mnt/Data cifs credentials=/etc/samba/auth.server.robertw 0 0
The auth.server.robertw clearly shows my correct username and password.
Now, I can't get into the /mnt/Data directory at all, just says permission denied and I can only read from, but not write to, the /mnt/CAD directory. My /mnt directory is like this.
drwxr-xr-x 20 500 505 0 2010-05-11 06:21 CAD/
drwxr-x--x 170 500 501 0 2010-04-09 23:18 Data/
I'm on Mandriva 2010 if that's important.
View 5 Replies
View Related
May 13, 2010
just noticed when I went to burn a cd (just got a new car and at the moment the stereo does't have a auxiliary port and I'm not about to use a shotty fm transmitter) that k3b spikes the cpu through the roof an freezes when I write/burn/convert a m4a media file... I'm using k3b version 1.91.0.
View 3 Replies
View Related
Dec 23, 2010
I have 3 network adapters on my Linux Machine. All I want is whenever I ping I want to use 1st Adapter card.In the same way, the next time if i want to use the 2nd Adapter for my other application, I should use the 2nd only. How gonna it be possible?
View 1 Replies
View Related
Feb 25, 2011
From Konqueror/Dolphin is possible to access samba shares. If your computer is joined to a Active Directory domain and you use a domain user, you can access samba shares with smb://server.domain/share and you are not ask for user/pass (you use a kerberos tiquet). Kde programs as Amarok, K3b, ... can access files in samba shares without problem. But other programs, specially gnome programs (including the popular OpenOffice), are unable to use files in a samba share. If instead of using Konqueror/dolphin you use Nautilus, there is no problem because it maps the share to a local folder ($HOME/.gvfs/share in sever/) and the program are able to access files in samba shares without problems as the folder is mounted locally (as if you use cifs.mount). Its a problem to use konqueror/dolphin and have to change to nautilus to access samba shares.
If you use Windows you can mount it in an easy way. That's what I try to do from konqueror, not having to open a konsole and be able to mount the share in an easy way. I've tried with smb4k, but is has not worked for me (tried in 2 OpenSuse 11.3 and 1 opensuse 11.2). What Nautilus does when accessing a samba shares like smb://server.domain.dom/share is to execute the command: [URL]... What I try is to do the same, but just form Konqueror/Dolphin. I'd like to add a button to Konqueror/dolphin that pressing the button and if the URL points to a samba share, the share is mounted in $HOME/LocalNetwork/server/share. As I say, it can be as easy as executing the gvfs-mount, but don't know how.
View 2 Replies
View Related
Mar 12, 2010
opesnSuse 11.1, linux 2.6.27.45-0.1-default x86_64 This host has two samba shares that are located on an OS/2 server. Neither mount at boot time but they do mount from the command line.
kernel: CIFS VFS: cifs_mount failed w/return code = -6
There are 5 other client computers that mount the same shares at boot time using almost (different user/pass info) identical data. I do not see what is different about this host.
View 5 Replies
View Related
Jan 11, 2010
I find that the new KDE4 notification icon is not very easy to see.The "progress" indication is a microscopic vertical progress bar, that I find very difficult to interpret.OK, it is a minor annoyance, but I do find that I regularly try to use the network on my laptop before the connection has been established.It is also a regression over the icons in 11.1 or before, which were very clear.If people agree with me on this point, I will post a bug, with the aim of getting a clearer icon.
View 1 Replies
View Related
Jun 17, 2011
I want to setup a Linux File Server for a small windows network (around 50 users). I do know that I am gona need Smb service/pkg for that. I haven't used Samba for a while now and as per the best of my knowledge, entire communication (including usernames and passwords) between a samba server & windows client machines will be plain text. Is there any way to secure all this communication??
Secondly, if i remember correctly, MS windows wont let me mount more than one samba shares as network disk when all my shares can be accessed by different smb users with different passwords?? is there a solution to this problem? OR may be if there is any other package available for this purpose so that i wont have to use samba?
View 4 Replies
View Related
Apr 16, 2010
The support unit here at uni doesn't support linux. Only Windows and Mac OS. And I can't quite figure how to get the printing to work. For windows I have to go to:
Code:
\print.plan.aau.dk I think its a samba print server. From here (on windows) I can choose which printer to use. There is an accounting system, so I need to log on with username and password. Is there a way to set this up easily in OpenSUSE 11.2 64bit KDE4?
View 2 Replies
View Related
Mar 17, 2011
Problems with setting up mobile broadband in KDE4? Than use this instruction: openSUSE starter: Step 2. Need mobile broadband? Use the GNOME applet to make the GNOME nm-applet work under KDE. With this nm-applet I have set up mobile broadband within couple of seconds.
View 1 Replies
View Related
May 27, 2011
Was enjoying my new experiences until I tried to access/see my OpenSuse 11.4 install (Within VirtualBox on Windows 7)I can surf the net and download packages etc but from Windows 7 the Virtual OpenSuse7 does not show up.I know the windows network works because I also have Ubuntu10.4 on VirtualBox and that I can see and access fine.Change to OpenSuse and it all goes down the tubes, doesnt even show up in the Network on Winsows 7With Ubuntu I have etho setup to use DHCP automatically.I've tried numberous settings unsuccessfully on Suse and I think in the process have probably changed something incorrectly, but it didnt show up in Network places even before I started fiddling.Settings within Network Settings are:
1) Global options
Network Setup method: Tradional with ifup
IPv6 Protocol - Enabled
[code]....
View 6 Replies
View Related
Jan 6, 2010
I wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?
P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)
View 5 Replies
View Related
Jan 30, 2010
Question 1.I have strange problem in OpenSUSE 11.2I have /etc/fstab entry:
//server/projects /server/projects cifscredentials=/root/.credentials,dir_mode=0777,file_mode=0777,_netdev 0 0
service network running
[code]....
View 1 Replies
View Related
Jun 18, 2010
I followed samba setup per thread Samba and Suse: HowTo Set up an openSUSE-Windows Home Office LAN/Network. Versions 11.x and then upgraded my samba from the special repository per advice at Samba broken after latest security update 11.2 - openSUSE Forums I can now see all my boxes on the network from either an XP or linux box and I can access my linux shares from any XP box but I can't access any XP share from my linux box (openSUSE 11.2). I get an error that reads "The file or folder smb://SharedDocs does not exist"I can see the SharedDocs folder under the XP box in samba shares though. And it really does exist on the XP box.
View 9 Replies
View Related
Sep 15, 2011
Using SuSE 11./4 on two machines. Successfully set up a server to share a folder. The client is able to read files from the folder, but not write to them.the client perspective, the shared folder permissions are read and write if owner, read only for all otherHowever, the server shared folder has been set up for sharing, and the permissions are set for read and write to all.
One more thing. When the client goes into the samba share, it sees the workgroup. Clicking into that, it sees the name of the server computer. Clicking into that,it sees two folders: "profiles" and "users". Clicking into "users" goes into the shared folder. I tried setting the permissions from the client side on the "users" folder using root privileges to allow reading and writing without any success
View 6 Replies
View Related
Oct 14, 2010
I can't for the life of me figure out why I cannot browse my own shares from my linux boxes. both run OpenSuSE 11.3 I follow swerdna's tutorials and reboot several times but don't have a clue as to whats going on to prevent me from viewing localhost shares or 2nd linux box shares. I get 'unable to mount location, Failed to retrieve share list from server' error when I click on my workgroup icon in nautilus.
View 7 Replies
View Related
Jan 18, 2011
I am posting this as I have tried several times to work this out. I have read article after article, post after post and tutorial after to tutorial to sort this issue. I have an Ubuntu 10.04 machine running as the LDAP and NFS server with two Opensuse 11.3 desktop machines. Both of the Opensuse machines can login using the LDAP server for authentication and this works fine. The server also exports the NFS Shares no problem but I am unable to mount the shares from the Opensuse machines. I have been using Yast, NFS Client to mount them.
Yast NFS Client can see the shares and lists them however when I apply the settings it states:
'Unable to mount entries in etc/fstab' I need to mount the shares according to the LDAP details as I want the users to be able to access their files no matter which machine they login at. Can anyone shed any light on the issue. Any help would be great and I would be enternally grateful as I am now beginning to pull my hear out slightly.
View 2 Replies
View Related
May 31, 2011
Having a bit of a minor issue with samba on Opensuse 11.4 64 bit. My problem is that I can't view my samba shares in Dolphin although I know they are there. If I bring up dolphin using the Opensuse shortcuts to samba I get this
My computers / drives attached to my network should be viewable here yet they are not. However, if I type in the address directly I can view and access my shares.e.g.
Here is a copy of my smb.conf
Code:
[global]
workgroup = farcusnet
netbios name = ThinkPad
passdb backend = tdbsam
name resolve order = bcast host lmhosts wins
printing = cups
[Code]...
View 9 Replies
View Related
Mar 16, 2010
Since OpenSuse 11.2 doesn't reconnect samba shares upon a resume from suspend, I wrote a small, ugly script to do so. It's placed in /etc/pm/sleep.d/66samba-remount
#!/bin/bash
case $1 in
hibernate)
echo "Hey guy, we are going to suspend to disk!"
/etc/init.d/smbfs stop ;;
suspend)
/etc/init.d/smbfs stop ;;
thaw)
echo "oh, suspend to disk is over, we are resuming..."
sleep 15
/etc/init.d/smbfs restart ;;
resume)
sleep 15
/etc/init.d/smbfs restart ;;
*) echo "somebody is calling me totally wrong." ;;
esac
and made it executable
(as root)
chmod +x /etc/pm/sleep.d/66samba-remount
The 15 seconds sleep time is useful to me to postpone the remount after WiFi is back online. Perhaps there are way more elegant ways to do so (check for x times if WiFi is on, for example), but I'm no good at bash, and this serves me well. How do I file a wishlist for 11.3? If someone puts a samba share in fstab, I'd assume he wants it connected mostly everytime (at startup for sure... so why not over a standby?) I hope 11.3 just reconnects in-fstab samba shares in a polished way, out of the box.
View 1 Replies
View Related
Apr 9, 2010
I installed 11.2 a couple weeks ago on a machine at work, and thru YaST connected to the domain. I was then able to add a printer, and thru nautilis browse to windows computers with shares. Something changed about a week ago and I've played with everything I can think of, read lots of tutorials, and still can't make it work. I'm about ready to format and reinstall from scratch and try again, as I'm out of ideas.
So the way it was before, in nautilus if I clicked on network it would give me a list of all sorts of computers on my domain, and if I clicked on one of the windows machines it would ask me my username/password, and after I entered them, I'd be in.
Now, in nautlis if I click on network it shows me "windows network" and if I click on that it gives me a list of all sorts of workgroups and domains (or something like that). If I click on the one with my domain name, it asks username/password but it doesnt work.
I've tried leaving the domain and rejoining, I've enabled and disabled kerberos, ldap, samba, everything I can think of - although I dont think I had to change those at all from default the first time.
I dont know what I could have done between when it worked and now. I did allow some installation of updates. Shortly thereafter I noticed ssh no longer worked, and after playing with it forever I couldnt make it work, I uninstalled openssh and then reinstalled it from the repository, and it worked again. No idea why it stopped working, but maybe it's related to this domain problem, I dunno.
My main goal at this time is to be able to access windows shares from the linux machine. I don't care if I have to login to linux with my windows domain account or a local account (although all the documentation I've followed said that I should be able to login with a domain username/password too).
View 3 Replies
View Related
May 20, 2011
I'm using Opensuse 11.4 updated from 11.3, update from 11.2 updated from. I'm mounting at boot time (in fstab) some shares from an opensuse 11.2 server. Mounting worked fine in 11.2, 11.3 and also in 11.4 but suddenly (maybe an automatic update?) It stopped working.... sometimes.
Sometimes they are mounted properly but sometimes they aren't. When mount fails I get a log error: "rpc.statd is not runninf but is required for remote locking. Either use '-o nolock' to keep locks local or start statd"
If I run manually (as root) mount -a the shares mount properly always, so I thought it was a problem of timing (the service starting late) so I tried to get a script to run after the network initialitation, the script does: "mount -a". But it doesn't work either.
View 3 Replies
View Related
Mar 15, 2010
To workaround the kio_smb madness, I set up shares to be mounted via /etc/fstab. It works flawlessly until I suspend my laptop. Coming back from suspend, samba mounts are not being re-mounted automatically. Since I'm new to opensuse, I wish to ask you:
Is there a polished way to make this happen, in opensuse approach?
Or shall I just go and toy with scripts in the init.d (or what is it in suse)?
As much as I could figure, I checked in yast, and smbfs service is signed as "Yes".
View 4 Replies
View Related
Apr 29, 2010
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
View 9 Replies
View Related
Apr 23, 2010
I am giving 10.04RC a try instead of Windows 7, so far so good. I can connect to my network shares fine using "Connect to a Server" & bookmark with the file browser, however when I use OpenOffice writer Spreadsheet to open/save files the shares disappear in the"Open/Places". Is this a bug in Ubuntu or Open Office? Is there an update/fix?
View 1 Replies
View Related
