OpenSUSE Multimedia :: 11.3 - Banshee (1.8.0) Crashing On Startup
Jan 22, 2011
I am running OpenSuse 11.3, I have Banshee 1.8.0 and I want to use it to manage my music but now it's crashing as it starts up. I had just moved all my music to the computer and banshee had just scanned it into the library and then it crashed, and now it crashes every time I try to run it. I have been using OpenSuse for the last couple years but I am still a novice when it comes to the command line and debugging.
View 3 Replies
ADVERTISEMENT
Nov 8, 2010
I use maverick 64bit and banshee crashes a few seconds after I start the program, this is what I get:
"Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application."
I deleted the banshee folder in .configure but every time the library is loaded the problem starts again.
View 5 Replies
View Related
Dec 10, 2010
I have always used and enjoyed Banshee. I recently did a fresh install of Maverick Meerkat. Banshee runs fine under my user account but crashes instantly under my wife's. I have tried deleting all config files and re-installing. Here is the terminal output when starting the program:
banshee-1
[Info 21:36:54.134] Running Banshee 1.8.0: [Ubuntu 10.10 (linux-gnu, i686) @ 2010-11-26 13:53:04 UTC]
[Info 21:36:58.351] Updating web proxy from GConf
[Info 21:36:58.458] All services are started 3.594578
[Info 21:37:00.919] nereid Client Started
Unhandled Exception: System.ArgumentException: UNC paths should be of the form \servershare.
at System.IO.Path.InsecureGetFullPath (System.String path) [0x00000] in <filename unknown>:0
at System.IO.Path.GetFullPath (System.String path) [0x00000] in <filename unknown>:0
at System.IO.FileSystemWatcher.get_FullPath () [0x00000] in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.IO.FileSystemWatcher:get_FullPath ()
at System.IO.InotifyWatcher.StartDispatching (System.IO.FileSystemWatcher fsw) [0x00000] in <filename unknown>:0
at System.IO.FileSystemWatcher.Start () [0x00000] in <filename unknown>:0
at System.IO.FileSystemWatcher.set_EnableRaisingEvent s (Boolean value) [0x00000] in <filename unknown>:0
at (wrapper remoting-invoke-with-check) System.IO.FileSystemWatcher:set_EnableRaisingEvent s (bool)
at Banshee.LibraryWatcher.SourceWatcher.Watch () [0x00000] in <filename unknown>:0
View 1 Replies
View Related
May 6, 2011
Since upgrading to 11.04, Banshee crashes as soon as it's launched. When run in terminal, I get the following: Quote:
[Info 12:37:35.878] Running Banshee 2.0.0: [Ubuntu Natty (development branch) (linux-gnu, i686) @ 2011-04-18 16:21:33 UTC] [Warn 12:37:36.571] Could not migrate album artwork cache directory - System.IO.DirectoryNotFoundException: Directory 'file:/home/laurie/.cache/album-art/32' not found. (in `mscorlib') at System.IO.Directory.GetFileSystemEntries (System.String path, System.String searchPattern, FileAttributes mask, FileAttributes attrs) [0x00000] in <filename unknown>:0
[Code]...
View 6 Replies
View Related
May 14, 2010
i'm using lucid and have ATI Radeon HD 4650 1GB graphics card. I installed ATI's drivers and XBMC used to work perfectly, but now after i disabled them and activated them again i have this problem:
Quote:
igor@igor-desktop:~$ xbmc
/usr/share/themes/MurrinaLoveGray/gtk-2.0/gtkrc:50: Murrine configuration option "scrollbar_color" is no longer supported and will be ignored.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server "�."
after 137 requests (136 known processed) with 0 events remaining.
When i start it,i see very strange image,like hundreds of rectangles with parts of images from games,applications,even parts of my Windows desktop (which is on another partition). And after 2-3 seconds,it exits.
View 1 Replies
View Related
Mar 12, 2011
I am big fan of SUSE.. waited like anything for 11.4 release .. but i am in trouble now .. installed 11.4 on Acer 4820TG (switchabe graphics with ATI mobility radeon 5650).. after booting it fails with the attached error while works fine in failsafe mode. Let me know if u need any of the details i am available online for some 5 hours.
View 9 Replies
View Related
May 14, 2011
I'm using Opensuse 11.4 with Gnome 3 (magic!) and have installed Banshee which is always brilliant. However, though I'm pretty sure I've installed all the requisite codecs, I cannot get it to rip my CD's to MP3. The option is not in the drop down menu, only flac, ogg, wav, and wavpack are available. Usually there's the option to rip to MP3 to accompany those options. The odd thing is it's playing other MP3's I've already got just fine.
View 9 Replies
View Related
Dec 7, 2009
I want to install the latest version on my system, so I go to the Banshee download site, and do the install for SuSE 11.0. That brings up the Yast2 installer, which tries to do the install, but barfs with message something like "banshee-1-backend-engine-gtkstreamer-1-1.5.1-1.1.i586 required, uninstallable providers bansheexxxx [OpenSUSE_11.0],Conflict resolution: following actions will be done" with a long list of actions.So I click on "OK-Try Again", but it doesn't DO anything, just endlessly repeats the same message.Is there some way to bypass this, and get it to actually install?
View 3 Replies
View Related
Aug 10, 2010
I don't know, I couldn't get Banshee to work at all in 11.2... Something to do with Codecs, licensing, or related. I upgraded the system to 11.3 and then just dbl-clicked on a .wav and a .mp3 file. Big surprise - everything worked wonderfully, all with no further effort from me!
View 3 Replies
View Related
Mar 25, 2011
I'm using OpenSuse 11.4, and I was wondering if anyone else has noticed consistent high CPU utilization with banshee? By high CPU use I mean, when the application is running (whether it's idle, playing music, or scanning) CPU use on my machine is almost consistently at 100% (one core pegged).
Scanning my music library took hours ... like 3-4 hours to scan 9500 songs, and banshee was the only application running on my machine.
Rhythymbox doesn't suffer the same fate, scanning the same library took 5 minutes and CPU busy is less than 2% when it's running or playing music.
I'm running banshee 1.9.3, and I'd rather use it vs Rhythmbox.
View 9 Replies
View Related
Apr 9, 2011
ok, here we go. updated last week from opensuse 11.3 to 11.4 via upgrade process.
everything is fine except that every day i wake up and sit down at the computer and go through my twitter, rss, etc., and end up going to videos or some other web site to play something - and there's no sound. sometimes there's also no sound in kaffeine.
so the first time this happened, i did some research, downloaded the s.t.a.r.t. script (which includes running the alsa-info script), and ran it, capturing all the info and put it in a text file which you can see here:
richard hack audio specs - pastebin.com
running rcalsasound restart usually crashes the flash player in my firefox 3.6.16. reloading the page then restores the sound.
in one case, closing and restarting kaffeine restored the sound.
but in every case, the next day, for three days now, as soon as i sit down at the computer, the sound is dead again.
View 9 Replies
View Related
Nov 15, 2009
I just installed OpenSuse 11.2 KDE on my Macbook and try as I might, I cannot get used to Amarok. I like Banshee and it's simple interface, plus the way it handles radio stations and the like.
I did install it using YaST and I am able to run it, but I am unable to add internet radio stations and also I am unable to play them (and other MP3 files) if I manually connect to the stream. As far as adding radio stations, I am unable to because the Genre box stays grayed out and the Save button stays grayed out because the Genre box has not been filled in (but I can't because it's grayed out). As far as playing MP3s, Banshee says I need a codec and when i click 'Search' for a suitable codec, it takes me to an OpenSuse download page with the decoder there but it's for OpenSuse 10.3, not 11.2.
These are probably simple problems with simple solutions but I can't seem to figure them out. Also, K3B says the MP3 Decoder is missing as well. I'm sure it is related to the Banshee problem too.
View 9 Replies
View Related
Dec 12, 2009
i have a fresh installation of opensuse 11.2 32-bit. my soundcard is terratec ewx 24-96. the card is detected in yast, and i can play test sound from the yast/sound panel. all volume sliders are set to maximum values (i have also double checked it in alsamixer).
i *can* hear the sound when doing this test from the gnome terminal:
speaker-test -dplug:front -c2 -l5 -twav
however to make this test work:
speaker-test -c2 -l5 -twav
i had to remove the asound-pulse.conf file. after removing this file the second test (speaker-test -c2 -l5 -twav) works. removing this file also solved the problem of missing sound in videos videos played in firefox. the original contents of the asound-pulse.conf file was:
pcm.pulse {
type pulse
}
ctl.pulse {
[code]....
the problem is i can't play any audio files (.wav or .mp3) in banshee.
i am sure the .wav file i use while testing is ok as i can play it with aplay.
when i try playing the .wav file, banshee does not complain about any missing codecs. the slider moves as the file is being played. i have also started banshee with the --debug option, but there were no errors in the output.
so my guess is that banshee is playing the files, it's just that it sends the data to the wrong device/channell or whatever it is.
all of the gstreamer packages i have installed are from the packman repository.
when i run gstreamer-properties, the only setting on the audio tab that gives me sound is: alsa (for the plugin) and default (for the device).
View 2 Replies
View Related
Dec 19, 2009
Hi! This is my first post here, I'm back to openSUSE since the last version I used 10.1 and I'm really enjoying using 11.2 so far .
Banshee (or totem) can't play mmsh streams. I have packman repositorie activated and have installed all gstreammer plugins plus ffmeg and ffmpeg related gstreamer plugins and libmms0.
I can play mp3, xvid and other formats, but these streams are the only thing that does not work.
View 4 Replies
View Related
Dec 19, 2009
the gui exhibits the usual signs "we code but haven't even used it before.." can't sort a list of tracks by track so can't play anything in the order it was supposed to be play in ie track 1 to 12.
View 1 Replies
View Related
Jan 2, 2010
I've got the multimedia stuff setup as here: Multi-media and Restricted Format Installation Guide - openSUSE ForumsI can play .wma files with VLC or with mplayer without any problems. However trying to play them with banshee it doesn't work and it pops up a dialog asking whether I want to search for a suitable codec (which also doesn't work).
View 5 Replies
View Related
Jun 25, 2010
I want to retain Banshee on my system. However, whenever I buy a CD that also contains video, it will not play the music or video. When I try to listen to the music, it simply puts a red cross against each track. Since combining video and music is VERY common, this means I have a whole host of CDs that will not play. MS media player and VLC have no problems with these, so how can I make Banshee play them?
View 9 Replies
View Related
Aug 2, 2010
I've really been happy with my switch from Ubuntu to openSuse 11.3. However, I can't figure out how to get the banshee-community-extensions, so I can play internet radio. Is there a repo that I need to load?
View 3 Replies
View Related
Oct 11, 2010
Just installed Open Suse 11.3 on my dual-boot PC ( and Ubuntu 10.10). Installation process of both OS goes well and smooth. But, unfortunately when I tried to play movies on both default applications (Banshee and Totem) in Open Suse Gnome 11.3, I've got the message to search for XVID MPEG-4 decoder. And till now, I still unable to search for it, because there's still no sound or a little sound on both players.
View 3 Replies
View Related
Nov 22, 2010
When I first plugged my ipod in, it said that it was too new to read, so I ran the update with banshee. Now it shows all of the files, but whenever I try to add or remove a file from my ipod, it say that it's preparing to synchronize, but just sits there. How to make it actually sync?
View 5 Replies
View Related
Dec 6, 2010
I am trying to uninstall/reinstall banshee. It is not playing nice with my setting sine yesterday.I can't even change the login name of my last.fm account within banshee anywhere.Everytime I uninstall/reinstall it, banshee just continues to reuse my non-working settings.
View 3 Replies
View Related
Feb 5, 2011
Recently upgraded to OS 11.3
Sound is working fine-- I can test my sound card in YAST and get sound when I play audio or video files using kaffine. But when I try to use amarok or banshee I get only silence, even when I just try to play system sounds.
View 9 Replies
View Related
Feb 20, 2011
Is there any way I can run .flv videos in Banshee? It plays the audio (which I believe is mp3), but it shows no video.
View 4 Replies
View Related
Nov 4, 2010
I've had problems with Amarok crashing so I reinstalled. I think its the Nvidia Driver, so I read on another thread. I tried the uninstall and init 3 thing and needed gcc and a few more files that were not installed. In the end I had enough and reinstalled. Now Amarok runs. If I install the nvidia driver I have an idea that it will crash like Ayrton Senna, or maybe quicker. so is there a simple work around.
View 9 Replies
View Related
Jan 22, 2010
I see that whenever I try and run a video, the system defaults to try and run it in Banshee.Banshee, though, sits there with a black screen and the information on what it is supposed to be playing. Clicking the Play button does nothing. This includes OGG (OGV?) video files.Does anybody use this feature in Banshee and got it to work?
View 1 Replies
View Related
Feb 16, 2010
First of all, I'm new in Banshee and linux. When I import my music files from system files into Banshee playlist and play this track, the file is recognized as "unreadable" and mark with the "x" sign. There is no problem to import and play the music from the original cd's. I have no idea what is wrong. I'm using opensuse 11.2.
View 1 Replies
View Related
Apr 17, 2010
Will there be eventually iphone support for example with banshee?There is no linux iTunes.
View 4 Replies
View Related
May 18, 2010
I'm running Banshee 1.6.0 under OpenSUSE 11.2. I listen to a lot of podcasts, and whenever Banshee ends one show and switches to another, it resets the sound volume from the value it was set at during the previous podcast.
I couldn't locate anything in the Sound preferences, and Banshee doesn't seem to have anything specific about making the playback sound sync with the system volume.
View 1 Replies
View Related
Jun 26, 2010
I have a dsi so all of my music in .m4a I have all the codecs/gstreamers packages installed and they are all from packman it's not my sound cause I can play them in vlc but in rhythm box it says that I do not have the proper codec to play the file. Any ideas? Also I'm on 11.2 latest updates.
View 3 Replies
View Related
Jul 23, 2010
Totem and Banshee don't seem to want to play .avi files, Kaffeine, SMplayer work perfectly though. I followed the Multimedia guide, and switched system packages to Packman.
View 2 Replies
View Related
