i have recently installed 11.2 with kde.i have problems regarding sound: systemsounds and amarok have sound.vlc has no sound firefox (for instance videos) has no sound.i find it all very confusing, why isn't theire a systemwide configuration for sound. (well it looks their is, but it is not working in all apps)
View 9 Replies
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies View RelatedopenSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
here's a lovely pic - [URL]
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies View RelatedI have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
I have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
my suse 11.2 no detected sound my asus p5kpl hda7 i am install alsa driver's not work i need
View 1 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
Running Compiz as a standalone WM.Managed to get Slim working, will post how later, but have no sound. If I boot using gdm3 the sound works. Obviously gdm3 loads something Slim doesn't, but can't workout what!Tried adding /usr/bin/pulseaudio --start --log-target=syslog & to my script - no dice, still no sound
View 2 Replies View RelatedI've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
I can play sound files with aplay, esdplay, and vlc, but I don't get any sound from iceweasel and chromium.
I installed a squeeze base system (without gnome and without the standard system utilities), then added (using --no-install-recommends) xserver-xorg-core, xdm, fluxbox, alsa-base, alsa-utils, alsa-oss, iceweasel, chromium-browser. Here I checked for sound and there was none from the browsers. I have since installed vlc, esound-clients, alsaplayer-esd, gstreamer0.10-alsa, and other software that didn't look sound-related and didn't change the symptoms.
Setting ICEWEASEL_DSP to "aoss" or "esddsp" doesn't help. Neither does "chmod -R 777 /dev/{audio,dsp,midi,mixer,snd}". snd-pcm-oss and snd-mixer-oss are loaded. Both my account and root are in group "audio". Running the browsers as root doesn't help.
This is the output of chromium:
In case it makes any difference, all of this happens in a qemu-kvm virtual machine with an emulated es1370 soundcard. Same with sb16 soundcard.
I would prefer not to install everything vaguely related to sound in the repositories in the hope of things fixing themselves. That's just ugly, plus I have only 200MB free space left.
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies View RelatedI recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!
Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing
(testing only for sound). I get:
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
