OpenSUSE Install :: Updating To Kde 4.5.2 ?
Oct 16, 2010I installed opensuse 11.3 from the dvd installer. It came with kde 4.4.4. I want to upgrade it to kde 4.5.2.
View 4 Replies
ADVERTISEMENT
OpenSUSE Install :: Updating From 11.1 To 11.2
Nov 30, 2009Been using suse since version 5.x (yes that long). I updated from suse to opensuse 10.3 (sorry I am broke. Everything works in my machine: bluetooth, ipod, printer. I moved to 11.1 (I was not able to update to 11.0 at the time because when I tried the installer will go in an infinite loop).
In 11.1: bluetooth does not work, ipod does not work (found that the bluetooth stack was broken same with ipod) then I hear about 11.2. I tried to update (in hope that all the issues where fixed) Updated the system tried to boot and fails: The reason was that was using USB to try to boot a SATA drive. Which I can tell you will not work
Use the rescue system and I can boot the machine, but there is not a single USB (so the printer can not work) It can not see the video card properly (works only in reduced mode 1200x800 16bit) no sound (asound just fails). Tried to install a new kernel and same. I just went back to 11.0 oh well waiting for 11.3
OpenSUSE Install :: Updating Knetwork Manager Not All Of KDE After 11.2 Install?
Feb 4, 2010After I install 11.2 clean from the ISO, I would like to update ONLY knetworkmanager, and not all of KDE. I would like to use zypper commands similar to the one below, which work for KDE. However, I would like the syntax for only knetwork manager and not all of KDE sample for KDE:
# please let me have the correct commands for
# ONLY updating Knetworkmanager
# These work fine, but I don't want to update all
# of KDE. I only want to update knetworkmanager
[Code]...
OpenSUSE Install :: Updating 10.2 To 11.1 Method?
Dec 31, 2009updating 10.2 to 11.1 method?
This is the dual booting IBM lap top with windows XP and has been working well for over 4 years.
I would like to install 11.1 as 10.2 is not supported and I have two other machines using 11.1.
I have all the data on suse 10.2 backed up, so it is just the procedure of installation without loosing XP
OpenSUSE Install :: Can't Shut Down After Updating?
Feb 10, 2010A few days ago I installed Nvdia fx 5200 drivers and after that I had on my grub menu Opensuse 2.6.31.8-0.1 Desktop along with Default. Since Desktop worked alright and Default would work only in terminal, I erased Default from Grub menu. Yesterday Update Applet warned about some updates, I installed them and had on Grub menu 2.6.31.12 Desktop with 2.6.31.12 Default. When I wanted to shut down computer, the screen froze. It works when I reboot but if I want to shut down, it doesn't do this, I have to make a forced shut down. How can I solve this problem?
View 5 Replies View RelatedOpenSUSE Install :: Cannot Login To KDE After Updating?
Jun 15, 2010I have a problem which has developed after just updating.When I try to log into KDE (as part of normal startup, etc), I instead get the error message:
Code:
Call to lnusertemp failed (temporary directories full?). Check your installation.
It then kicks me back to shell login. This also shows another error message which I'm
[code]...
OpenSUSE Install :: Will Not Boot After Updating
May 8, 2011Yesterday I ran an "Online update". One package came up with an update available. Quite honestly, I didn't even take note of which package it was. Anyway, I applied the update patch. After that my computer wouldn't boot. Grub ran normally, and some of the drivers, and such would load, but just about the time when kdm would come up, all I get is a blank screen. Monitor says "No Signal". I have to manually restart.
I managed to boot into failsafe mode, log in as root, and then run kdm from the console. That way I can login. However, my computer is very, very slow running failsafe mode. how I can get it back to normal? also, is there any way to check the history of updates?
OpenSUSE :: 11.4 64 KDE New Install - Updating And Application Dependency
May 6, 2011I got a new hard drive in and decided to do a completely new install of 11.4 64 on my "testing/spare machine:. I have my dual monitors configured properly But I ran into two issues. When doing a manual post install update from the 11.4 updates repo I have one file that will not play happily named cronie. When trying to install the application wspr from the hamradio repo I get the following error for an unsatisfied dependency. I have the same application installed on another 11.4 installation on this system and it didn't choke on this file.
View 7 Replies View RelatedOpenSUSE Install :: URL Not Found DURING ONLINE UPDATING?
Jul 9, 2010When I try to update on line I get the messagehttp://download.opensuse.org/reposit...ctory_Desktop/ not found.I am using openSuse 11.2 with KDE desktop.
View 7 Replies View RelatedOpenSUSE :: Firefox Updating / Install From File Download
Jan 29, 2010I have downloaded the firefox 3.7a which was a tar.bz2 file. After downloading extracted the tar.bz2 into a download folder. Now I can figure out to do from there. How can update using this firefox update. All the zypper/yast ect. only use my repositories that dont have 3.7a and I can not figure out what else to do. Google searches all just say use package manager. But how do you use a package manager for a file on your hard drive?
View 1 Replies View RelatedOpenSUSE Install :: After Updating KDE To 4.4.2 And Kernel To 2.6.33 - Suspend To RAM Dissapeared
Apr 9, 2010After updating KDE to 4.4.2 and Kernel to 2.6.33 i realized the option so suspend to RAM dissapeared. Only suspend to disc is available.
View 7 Replies View RelatedOpenSUSE Install :: Unable To Boot After Updating The Kernel
Oct 4, 2010Yesterday I updated openSuse 11.3 on my laptop. Kernel update from 2.6.34.4-0.1... to 2.6.34.7-0.3-desktop was included. Yast performed fine and at the end it stated to reboot for using the new Kernel. So I did, but what a bad surprise!! Normally the Grub menu should have been updated, but not this time. Fortunately I know how to handle this, but not all users will be able to resolve this problem, so here's what to do if this happens to you: You will run into the Text console saying: Press any button to continue... Before doing this write down on a piece of paper the text lines visible on the screen, starting with:
kernel /boot/vmlinuz-2.6.34.4-0.1-desktop root=/dev/disk/by-id/ata-Hitachi....... resume=/dev/disk........
or whatever it reads for your system. You will need this info to edit the menu and succeed to boot. Now press any key and you will get the Grub menu. The standard option will be highlighted. press "e" to edit that option. Next you will see the Grub menu lines
First press key "o" to add a new line, select it by arrow down, press "e" to edit the line. (In my case it was not possible to edit the full original line, but only the added options like vag=0x317) Enter the line you wrote down, but change the kernel's version number to the new one Should look similar like:
kernel /boot/vmlinuz-2.6.34.7-0.3-desktop root=/dev/disk/by-id/ata-Hitachi.......
(it works if you only use the part before "resume=/dev/disk....") After finishing hit Enter and you will turn bach to the Grub menu lines. Now move with the up/down arrow key to the old line, press "d" to remove the old line. Next move to the line with "initrd /boot/initrd-2.6.34.4-0.1-desktop", press "e" and edit the line so that it reads: initrd /boot/initrd-2.6.34.7-0.3-desktop press Enter to move back to the Grub menu lines. Now press "b" to boot. After booting log in, open your file manager as root, browse to /boot/grub and open the menu.lst file to edit and change the kernel old version numbers to the new one. Save it and next time it your machine will boot normally again.
OpenSUSE Install :: Is Updating Process Different In Various OS - E.g. Suse And Ubuntu?
Feb 14, 2011I have OpenSuse 11.3 KDE installed in dual boot with Win 7. Have used Ubuntu in the past and remember that whenever I started my computer with Ubuntu, i had a black colored screen which showed various kernel options. So in short I was sure that the Ubuntu installation had updated itself. On the contrary, whenever I start Suse 11.3 KDE, it shows me just one option of Suse 2.6.34.7-0.7
I have doubts, is Suse up-to-date, and also there is mention of KDE 4.6 on kde.org website.
But my operating system information is as follows:
KDE: 4.4.4 (KDE 4.4.4) "release 3"
OS: Linux 2.6.34.7 -0.7 -default i686
System: openSUSE 11.3 (i586)
I have also seen that on 10th Mar 2011, Suse 11.4 will be realeased. Will update/ upgrade of this installation work in this direction?
OpenSUSE Install :: Repo Packman, Errors Updating For 11.1?
Jun 8, 2011im trying to do a zypper update for opensuse 11.1 and i get an error from the packman (essentials) repo,
it says that i can't find ./i586/libgupnp-1_0-3-0.13.0-3.2.i586.rpm in Index of /pub/linux/misc/packman/suse/11.1/Essentials
but I've checked and It IS there.I paste the complete error below.
[Code]...
OpenSUSE Install :: Updating SystemTap Failed After Power Failure
Apr 27, 2010Unfortunately my laptop was powered off whilst the Updater Applet was doing an update. Now, after a reboot, the system always fails when updating. Neither the Updater Applet nor yast does succeed. To me it looks like some involved DB got corrupted. The error messages are shown below.
Code:
Subprocess failed. Error: RPM failed: error: package systemtap-runtime-0.9.9-2.4.i586 is not installed
Code:
Subprocess failed. Error: RPM fehlgeschlagen: error: db4 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db4 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
OpenSUSE Install :: Can No Longer Boot Into 11.4 After Updating NVIDIA Drivers
Apr 24, 2011Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
OpenSUSE Install :: Updating Packages Leaves Discontinued Files Orphaned?
Jul 27, 2011I updated the package libcgic-devel to a newer release of the same version. The change in the distributed files includes renaming a file cgic.html to index.html. I have both files installed now and cgic.html is orphaned.
View 6 Replies View RelatedOpenSUSE Install :: Updating SUSE And Accessing The Repositories Through The Yast Software Installer?
Jun 14, 2011I hope this is the right forum in which to post this but I am currently running SUSE 11.2(I know im a couple versions back, its a long story but this box has been in storage for awhile) but the problem I am having is with updating SUSE and accessing the repositories through the Yast Software Installer. When I open it I get several variations of this message:
Download failed:
File '/repodata/repomd.xml' not found on medium '[URL].. I think this must have something to do with an old repository not being up but im not exactly sure how to fix this.
Ubuntu :: Updating Withough Updating Kernel ?
Apr 21, 2011I have a 3dsp pci wifi card, and the last kernel it supports is Ubuntu 10.04 2.6.32-(21-24) I want to update but dont want to accidentally update the kernal.
View 3 Replies View RelatedOpenSUSE :: After Updating To 11.4 Still Use 11.3 Packman?
Mar 9, 2011I have updated to 11.4 via changing repos and zypper distribution updating. I can't find audacious plugins and vlc in 11.4 repos. Is it ok if I use 11.3 packman repo?
View 2 Replies View RelatedOpenSUSE :: Package Kit Error When Updating KDE
Feb 26, 2010What does this message mean? Can't KDE be updated at all or is it just this swedish dictionary?
PackageKit Error cannot-remove-system-package: Subprocess failed. Error: RPM failed: error: rpmdbNextIterator: skipping h# 1022 Header V3 RSA/SHA256 signature: BAD, key ID 3dbdc284 error: package kde4-l10n-sv-doc-4.3.1-2.4.noarch is not installed
Whats the remedy? "Totally new to Open Suse".
OpenSUSE :: Updating Amarok With Zypper
Apr 22, 2010I added Index of /repositories/KDE:/Backports/openSUSE_11.2 The opensuse.org says: If you just want the latest versions of e.g. amarok, digikam etc. you don't need to upgrade all of KDE, just add the Backports repo maintained by the openSUSE KDE Team. I want to update the Amarok to the new version (2.3) with zypper but I cant.
[Code]...
OpenSUSE :: Consultation On Updating The System
Jul 3, 2010To upgrade the system in preserving with vendor packages How should it?
View 3 Replies View RelatedOpenSUSE :: Nautilus Does Not Work After Updating To 11.3
Jul 21, 2010The reason why I'm asking help here is because I'm being continuously ignored in #opensuse-irc-channel in freenode. I updated from 11.2 to 11.3 couple of days ago. I have always used gnome and loved it. Update from 11.1 to 11.2 didn't bring any problems and neither did from 11.2 to 11.3. Update went fine, no errors whatsoever occurred. Of course I had some problems with nvidia drivers and it was hard to get dual screen to work, but I managed. After that I figured out that nautilus is missing, because my desktop was empty and no right clicks worked. So I tried to run it from command line to see what it prints out:
Code:
[03:39:33] peikko ~ $ nautilus
nautilus: symbol lookup error: nautilus: undefined symbol: nautilus_file_info_getter In irc they said me before that I have mixed packages or something. I don't know what's the case but my nautilus just won't work. I ran "zypper dup" and synced the packages, and after reboot I figured maybe nautilus from 11.2 would work, so I one-click-installed it from software.opensuse.org/search without adding the repo of course. And for some reason it worked, maybe because I had zypper dupped before.
Being happily using my computers couple of days I noticed video thumbnails don't work any longer, so I killed nautilus. And duh, it didn't start again. I reinstalled nautilus from 11.2, and it looked like this:[URL] I decided to update it back, and live without nautilus until I find the solution. This is also my server, so reinstalling the system is not an option because I have all those confs and I don't have hard drive for backuping. I also tried again zypper dup from official repo with no joy. I also tried zypper dup & reboot from couple of other repos, like gnome latest for opensuse 11.3, but nothing changed.
OpenSUSE :: Weird Bug With The Authentication When Updating?
Apr 1, 2011Since I installed the 11.4, I have a weird bug when I do the update process (in GUI).Though it doesn't prevent the updates to install, it is a little annoying. When I click the accept button to apply the updates, I get the usual authentication dialog. I input my password and then I get the same dialog but without the field to enter the password. If I click the Authenticate button, the dialog doesn't shut and the update doesn't proceed. But if I click the close button in the title bar, the dialog shuts and the update proceed. I never had this second dialog appearing in both the 11.2 and 11.3.
View 9 Replies View RelatedOpenSUSE :: Package Conflicts Updating KDE SC 4.6.5
Jul 16, 2011OpenSUSE 11.4, 64 bits, with
Index of /repositories/KDE:/Release:/46/openSUSE_11.4
and
Index of /repositories/KDE:/Extra/KDE_Release_46_openSUSE_11.4
repositories enabled. Since some days, if I go to YaST2 †’ Package †’ "Update packages if a new version is available" (I'm translating from Spanish) I get a warning that plasma-addons-4.6.5-9.3.x86_64 needs akonadi-runtime < 1.5.40, but that that requirement cannot be match because there are eliminated providers: akonadi-runtime-1.5.3-91.1.x86_64
and non instalable providers: akonadi-runtime-1.5.0-3.3.1.x86_64[openSUSE-11.4-11.4-0]
As "solution" it offers me to not install akonadi-runtime-1.6.0.93.1.x86_64 and libakonadiprotocolinternals1-1.6.0.93.1.x86_64 (which I selected) or to uninstall plasma-addons and kadressbook, which I do not think it is a good idea...
OpenSUSE Hardware :: After Updating X Fails?
Oct 2, 2010I got a laptop (ACER 4820GT) with an integrated intel HD graphic card (which comes with the i3-350M processor) and a ATI mobility R HD5650. I installed OpenSUSE 11.3 last night and everything works fine though drivers were not installed and desktop effects can not be enabled. However, after connected to the internet and got updated this morning, the system just can not start again, it ran into black screen half way of startup then lost response. What I really want to see is I can block up the ATI graphics and e system running properly with the intel one. However, after searching this forum, I found there may not be proper driver for some intel graphics.
View 3 Replies View RelatedOpenSUSE Multimedia :: No Sound After Updating To KDE 4.4
Jun 26, 2010I seem to have a problem with sound after upgrading KDE. All multimedia applications (Amarok, xine, vlc) do not produce sound at all. Sounds at startup and notifications have also disappeared. However, when I go to yast -> sound -> play test sound, it works. I tried to update my sound drivers following instructions from here: Alsa-update - openSUSE but it didn't change anything. I also tried to configure the sound output device in Amarok (Configure -> Playback -> Configure Phonon). The only option that it offers is PulseAudio Sound server, and when I press "test", nothing happens (although it is supposed to play a sound).
I have the following packages installed:
alsa-plugins-pulse-1.0.23-28.1.i586
alsa-driver-kmp-default-1.0.23.20100626_2.6.31.12_0.2-1.1.i586
alsa-firmware-1.0.23-8.1.noarch
alsa-utils-1.0.23-20.1.i586
alsa-plugins-1.0.23-28.1.i586
alsa-1.0.23-62.1.i586
alsa-tools-1.0.21-2.5.i586
alsa-tools-gui-1.0.21-2.5.i586
alsa-oss-1.0.17-53.1.i586
libasound2-1.0.23-62.1.i586
pulseaudio-lang-0.9.21-57.2.noarch
pulseaudio-0.9.21-57.2.i586
OpenSUSE Network :: DHCP Is Not Updating DNS
Aug 11, 2010I have a small network setup and I cannot get DNS to work. DHCP is functioning normal and working fine but it cannot update the DNS pointers for some reason. My files are below.
dhcpd.conf -----------------------
Code:
ddns-updates on;
ddns-domainname "mydomain.lan";
ddns-update-style ad-hoc;
allow unknown-clients;
[Code].....
OpenSUSE :: Updating Java (Version 1.6.0_0) Failed
Feb 16, 2010Firefox 3.5.7
SuSE 11.2 64bit
Current Java Version 1.6.0_0
The latest version is 6.0_18 Followed instructions for a number of different ways of getting Java updated and i've failed miserably.
