OpenSUSE Install :: Mounting Mandatory File Systems But The Next Step Fails?
Mar 11, 2011
Maybe this is the wrong place to ask, but I'm trying to install opensuse 11.4 (64-bit) in virtual box, the installation went smoothly (no visible error messages). But the boot seem to get stuck. If anyone has got an idea what it could be, it would mean a lot. These are the last prints in the log before it gets stuck:
INIT: version 2.88 booting
System Boot Control: Running /etc/init.d/boot
mounting mandatory file systems done
during the boot process mounting other file systems takes a while. Although it ends up resulting [OK] it was not like this before and it used to be was very fast. I took a look at /etc/fstab file which is posted below, and suspected that devpts is the problem. So I commented it out and reboot, but it wasn't helpful.
I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
I have a D-Link DNS-323 network drive which mounts at multiple points to my filesystem when booting. I had to make some fstab changes when I upgraded from 11.2->11.3 last year, and now the same thing seems to be happening since I've upgraded to 11.4. When I login to my profile the desktop hangs and no icons appear. I cannot open a Nautilus window, or access ALT-F2, however just about every other program works fine. Since I disabled the fstab lines (slightly modified when copied here to generalize):
the desktop icons load and Nautilus works. Can I adjust my fstab syntax to correct this and get my network drives back? I think last year the issue was in referencing the ".creds" file...
i had problem on installing my nvidia gforce 8600m gt driver on fc12,now i have installed fc13,could any one show me a step by step way to install the driver?i don't want to confront with that black screen one more time,as i understand if we download the driver from the nvidia website there would be a relationship between the kernel version and the driver,if so what is it?how should we understand which driver is for which kernel?my kernel is,2.6.33.3-85.fc13.i686.PAE[with 2 gb ram]which way is better?to get driver via repos and yum or the nvidia website?
If you have a contiguous partial piece of an ext4 file system (assuming it's perfectly clean), starting from the beginning of the partition, is there any way to check it, or to mount it to get the files whose parents, inodes and data are all completely contained inside?
Have (or maybe had) a very large 11TB RAID 6 array, filled with a single large ext4 partition. Something strange happened when a single drive failed and the array ended up failing 13 out of the 11 drives. I had trouble getting the array restarted, and got to the point where I exhausted all of the options I considered completely safe. I considered a few things that may have worked, but mdadm doesn't seem to have a definite "do not change anything" option. So I decided the only way to be absolutely safe would be to clone the disks before proceeding - then I realized how much time that would take and sent the drives off to a recovery service so they could image them and check it out.
Before doing so, I copied the first 2GB from each disk. I XORd the images from the working drives to reconstruct the data chunks that were on the failed disk, manually assembled the chunks, and am very confident that I have 22GB of "correct" data in a single file. The parity and Q syndromes all matched (with RAID 6 you can still check with only 1 missing device). I've learned the fine details of ext4 from [URL], and have looked at lots of raw data from the reconstructed partition, and it all looks good. The recovery company says that they're not finding many inodes, but I found a lot of them, exactly where they're supposed to be. I tried to mount and e2fsk, but both processes seem to be extremely unhappy that the device size doesn't match the size implied by the file system geometry.
I considered hacking the superblock to manually reduce the size, but I figure that wouldn't work because there would then be more group descriptor blocks than it would expect after the superblocks. I might try doing that and compensating by incrementing the "reserve block count" to compensate. Alternatively, if there is some way to make the file appear to be the expected size with nothing but zeroes after the end of the actual data, maybe I could mount it and not get any errors until I cause the kernel to read past the true end of the file.
I have a problem after "Loading Linux Kernel - 100%".It mean when I chose "Installation" or "Check installation media" after boot screen, I see "Loading Linux Kernel" from 0% to 99% and after that I see only Black screen for long time. Even NUM LOCK key or Ctrl+alt+del has no resultThere is no a problem with 11.2 and 11.1(current OS).Machine: HP xw8400, 2 CPU XEON 3.0Ghz, 4GB RAM, 2x250GB HDD SATA, NVIDIA Quattro FX 1500 256MB.The same problem with VirtualBox (on the same PC).
Last line in "text mode Installation" is : ... [ 0.040974] Checking 'hit' instruction... OK.
I am installing from the scratch a 11.3 on a PC on which previously 11.1 did run flawlessly. (Athlon 3700 with 3GB ram and Asrock socket 939 mainboard. Graphics is Nvidia. The installation comes every time up to 90% when it arrives at "font initialization). No error message is displayed. The little "cursor wheel" is still turning but else, there is no activity.
DVD from an sha1 checked and MD5 doublechecked download was burned with lowest speed in K3b and verified by the same program post burn, with full success of every verification. Tried to change DVD reader but does not change the result. Runs speedy up to that step.
I'm trying to install the 32 bit ubmbuntu 11.04 on my pc, and the installation freezes at the 'Detecting file systems' message. i have tried installing on a pc that had windows xp, and i also tried a clean install on a formtted hard drive, and i still get the same problem.
Is it possible to make two computers have the same users, home directories, and users? As in if I login to one computer and add things to the home directory can you apply it to the other computer and if I add a user on computer 1 the user will be on computer 2.
My son's desktop has Fedora 12 and a wireless card. Everything worked for a long time until one fine day the network management just disappeared from both System/Preferences menu and the panel on top.I can run a Live CD with Fedora 12 on that machine and it immediately connects to our home wireless network. Booting from hard drive has no sign of NM. Trying to run 'yum install NetworkManager-gnome' does nothing because there is no connection. Running the same command as a LiveUser from CD does seem to install everything (but where to???), no errors reported, and still the is no network functionality upon reboot from the hard drive, even when plugging to LAN with a cable.It seems that I need NetworkManager in order to go online in order to install NetworkManager.I have other computers at home that work fine, I was able to download a couple of archives with NM, but I am new to Linux and have no idea what to do with those files.I could not find any step-by-step installation guides for NM, especially when the computer has no connection at all.
Recent refugee from Ubuntu here. Fedora fan for one month.I have two computers that access the Internet through a router. They are assigned IPs dynamically by the router's DHCP. I need each computer to be able to "see" some shared folder on the other one, with RW permissions to that folder and its content.I want to use Nautilus to access those folders from each computer.
Tried NFS, Samba, gnome-user-share to no avail.
Willing to kill Fedora's firewall forever in order to ease folder sharing.Can some kind and knowledgeable person try a step by step setup guide for this? As an 8-year Linux user I am not afraid of command line interfaces.
I'm an absolute beginner trying to sue Linux. I just installed Ubuntu Linux Netbook Remix 10.04 LTS and everything's fine. I just wanted to have Java in my Ubuntu. I downloaded JDK from Sun website. There are 2 files
I searched the web for instructions on how to install but I just get confused. Can anyone provide me with step-by-step installation including registering environment variable ?
i would want someone who would like to assist me as i start to use linux because i am naive to this platform. Also want a step to step approach to this platform called linux i mean a self explanatory article or tutorial
I am trying to install 11.2 on a Dell Poweredge 2550 - two processors,all scsi, raid disabled, ATI grahpics. Fails at "failure to mount clich file system" - reboot.
i installed rtorrent using the script in the rtorrent forum it installed webmin and vsftpd.vsftpd shows connection refused tried everything open port 990 in iptable disable selinux but not working someone tell me step by step to reinstall vsftpd on ubuntu 10.0.4 (32bit)
mention an example step by step procedure for adding a PLUGIN in Cacti. And also mention what does a PLUGIN serve in Cacti ? I am a newbie to cacti please consider my silly questions.
I have read a bajillion tutorials and have gotten nowhere. This is my first Linux box, and it has been nothing but headaches. i'm pretty handy around computers, I took a Unix class, and I used Dos as a kid, but i'm just having so much trouble with this.I just want to remotely control my Ubuntu box from my windows laptop over my home network. That's it. I cannot find one comprehensive step-by-step tutorial that will show me how to do this. Everything I find assumes I know at least something about linux, and I don't.
I have Putty, realvnc and tightvnc viewer installed on my laptop.I have open-ssh and vx11 somethingorotherinstalled on the Ubuntu box. I have also allowed remote connections on Ubuntu from system>preferences. I am getting very frustrated and would really appreciate someone giving me some help. So far I HAVE been able to remotely control the box through one method. Through the GUI on ubuntu I went to: System>Preferences>network connections
and set the server to static IP, then I was able to use real VNC viewer from my windows machine to connect to the IP I set (192.168.0.11) but I couldn't get there through servername.local or whatever it said. The problem witht his solution is that the Ubuntu box then couldn't connect to the internet (which I need it to do.) someone please please please direct me to the information I need for this simple task. I just need to remotely control the desktop, the reason I wanted to use vnc through ssh so that I can leave the ubuntu box headless. Using just VNC I was having problems when the box was rebooted (had to log in before I could remotely control it... something about a security key ring?)
For a testing purpose iin our environment we need to setup a Linux based virtual machines.For that i come to know there is a option in RHEL using xen or kvm.can anyone provide me the detailed step by step for setting up virtualization in rhel?Also i have few doubts like, is redhat subscription needed for achieve this?also there is a possible to do vmotion thing which is in vmware,can we do that with rhel virtualization without rhel subscription.
I am using redhat linux enterprises edition 5. Please some help to enable SNMP on linux box.Please tell me step by step configuration for enabling SNMP.
I'm using - Ubuntu and openSUSE. I've looked on the Internet for how to install software on these operating systems, but I can't seem to understand the terms used, such as:
Currently, I am setting up multi seat system with Fedora 14 but after hours of searching, i'm still running into some issues. I have managed to edit and get the xorg.conf file working although im still having problems.
I want to set up the multi seat so that 1 server with 2 graphics hards connects to two monitors and have their own sessions. I have got the xsessions working although you can move the mouse across 1 screen to the other. Is there any resources as to step by step for setting up multiseat of fedora 14? Are there any main issues regarding custom.conf?
I am trying to setup thttpd on my ubuntu 10.04 system. I run ubuntu in a vm and would like to be able to turn on and off a simple web server as I please. I have been having lots of trouble trying to find a guide on how to setup and run thttpd. I have looked at the author of thttpd's homepage as well as this guide, and yet I cannot get it to work. Basically I have it installed and don't know how to start or configure it so that it starts. Current code
Code: user@ubuntu:~$ sudo apt-get install thttpd [sudo] password for user: Reading package lists... Done Building dependency tree
Now I am using fedora14 for a long time. I want to know how to make a Linux desktop. I just want to download a linux kernel source, then compile it, then add softwares step by step, Last I want to get a desktop linux with X11.
