I have just installed Open Suse 11.4 Gnome, and I am trying to work on files on my windows partition that is ntfs, and it keeps telling me that they are "read only"......I check my /etc/fstab file and that it shows permissions at the end of the windows partions to be "0 0", which I was told was what was I needed to be able to work on ntfs files in windows?
View 6 RepliesI am using open suse 11.4 on my dual boot laptop, and am trying to access and modify files that I have on my windows 7 partition, not sure but think they are ntfs directories. I can access and view them but need to be able to modify them.
View 3 Replies View RelatedNow however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I have installed Debian as a second OS alongside Win XP, and now I have Win XP on C drive (if viewed from XP), NTFS, my data files (mainly texts and graphics) on D drive (NTSF), and Debian on ext3. Debian sees and opens files on D.
1. If I read-write from-on this D partition from both OSes, is there a chance the data will be corrupted?
2. If I open a Windows-created TXT, GIF, JPG, HTML or other not-proprietary format file from Debian, edit it and save (just SAVE, not SAVE AS) - will this file remain readable from Windows?
In HDD with 2 partition
sda1 windows xp
sda2 windows 7
1. It is possible to install grub? (Using live cd)
2. If not, if I create sda3 (ext3), and install grub there and boot both windows will be possible?
Currently I have ubuntu 10.04 LTS as the only OS.I have two partitions one for ubuntu and it is ext by default for ubuntu's files.The other is empty NTFS. (yes, it is formatted in NTFS but I haven't saved anything yet on it).The problem is: I want to install win xp sp3 on this empty ntfs partition safely (without losing ubuntu).My friend told me ubuntu will be lost even if I didn't touch its own partition.
View 5 Replies View RelatedI'm running Ubuntu 11.04 on my Acer extensa 5620. I need to install windows and setup a dual boot on this machine. Here's what I did. I followed the instructions on this page
[URL]
and resized my home partition (which is differenet from the file system partition). Anyways, I resized the partition and made a new NTFS partition. This was all done from Live CD. I then rebooted and then tried the windows installation CD. Now here my problem crops up.
Windows says that no partition is found. What have I done wrong? Any ideas? Can the drive be damaged or have I made a mistake some where? I did not specify a mount point for the new NTFS partition, does that matter?
so i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies View RelatedI've dual boot: opensuse 11.2 and Windows XP. Howto mount and write to ntfs partition using /etc/fstab?
View 3 Replies View RelatedJust installed 11.3 and upgraded kde to 4.5. Install is on Toshiba notebook with Win7 and Mepis 8.5.
Ntfs and all other partitions show in fstab and partition manager but not in Dolphin or Konqueror.
How to see and mount other partitions?
I used QParted to size one my hard drive's NTFS partition to make unallocated space available to install SUSE. QParted created the the unalloacted space fine and I got SUSE up and running.
However, the NTFS partition is messed up. The QParted GUI and the SUSE's Disk management GUI shows it as NTFS drive with 319 GB space. However, nothing seem to be able to read/write to it. QParted gives a warning "Unable to read contents of this file system! Because of this some operations maybe unavailable." Is there any way to fix this NTFS partition so I can recover data from it?
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
When I installed OpenSuse 11.2 it mounted I configured to mount all of my windows/NTFS partition. However, one problem is that only root can write to it. I was trying to change it to '777' permission. However, as root I can't change permission. chmod doesn't work and neither does using nautilus (as root) work.I even tried unmounting it and then doing a chmod. That didn't work either.
View 1 Replies View RelatedFirst off let me say that I love working with Ubuntu. It's a great OS to learn Linux on. Now on to my problem. I have a laptop that dual boots. Ubuntu 9.10 x64 and Windows 7 Ultimate x64. Been working just fine. I was using NTFS-Config to auto mount the Win7 partition during startup of Ubuntu. It has been running fine. I am able to move files between the linux partition and the NTFS partition with no problem. Now I've come across a problem. I big problem. Just this week I installed VirtualBox onto Ubuntu. I started creating virtual machines. 6 in all (3 Win 2k3, 1 2k8 and 1 Win7). I was saving the virtual machines to the NTFS drive as this was by far my largest drive. I used a directory titled "virtualbox" under the c:/users/public directory. This setup was working great. Was able to get my vm's patched and up to date. Created several snapshots. Basically I was a happy camper.
Last night I booted into Windows 7. OS started fine. I was just surfing the web. After that I rebooted the system and entered Ubuntu and started Virtualbox. I tried to start a vm and it complained that the virtual harddrive was missing. I checked to make sure that the path was correct for the virtual drive and discovered that the entire virtualbox directory that I created on the NTFS partion was gone!!! Everything else was in place and intact including music and large video files that I had downloaded to the Ubuntu partion and moved the the NTFS partion.
I save these virtual machines???? Should I abandon using NTFS-Config. This is somewhat critical since I had took sometime to create this test lab and to have it disappear from simply booting into Windows 7 is crazy.
Have a multi boot system running Opensuse and windows xp Have booted up opensuse and the windows xp partition is mounted on /windows/C by suse.
This is what i have done
Installed wine 1.x version
mounted /windows/C with exec option in /etc/fstab.
Now when i tried to execute a exe file from the /windows/C using wine with this command
wine /windows/C/Program Files/Windows Media Player/wmplayer.exe - This isa just a example . For all the exe files i get the same error
i get a pop up saying . "there has been a error running this exe or dll file . report the error to appdb.winehp.org"
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View RelatedI just got a new laptop and am dual booting Windows 7 and Ubuntu 10.04. I tried mounting the Windows partition to access some files (such as documents), but they won't show up in Nautilus. I double checked their location from inside Windows, but they're not where they should be.
View 3 Replies View RelatedBy mistake i have deleted few files from my NTFS partition,is it possible to recover all those files..?
View 9 Replies View RelatedSo I am reaching an unfortunate conclusion. I asked this of google and got no straight response so I conclude that it is impossible. taking a look at GParted with my 10.4 boot disk, I see
/dev/sda1 NTFS 74GB boot flag
and
unallocated unformatted 7.84GB no flag
So I assume that that 8gb used to be ubuntu.
In the process of trying to fix things, the computer no longer boots windows.
This is not a question, I have done it. I just want to post a little howto in case anyone runs into a similar problem.I will not go into particular details, just the rough description. If need details on something, I'll be happy to explain the part in question.
I am working on linux for almost a decade now. However, there are some things that need to be done on windows, like gaming (ATI drivers for linux are still a bit tricky, especially for newer cards) or rs232 (serial port) based apps (old smartphone management, PIC or ATMega Programming, old graphic calculator like TI92 etc.).So in short, I had once set up a windows system. I wanted to use my files both under linux and windows. The solution for this problem is obvious: I used a NTFS partition I could mount under both OS.Since I am a security concerned citizen, I use to encrypt my disks. However I refused using Vista and Win7 hadn't come out yet, so I was running XP64. The opensource LUKS tools didn't work on that system (driver issues), so I used Truecrypt.Some time ago, I abandoned the windows partition after a fault in the MBR, which rendered the Truecrypt bootloader unusable (yes, even with the rescue disc). Since I rarely have to time play games anymore, that's not a major concern. The rest of the tasks can be handled using a virtual machine (in my case Sun's VirtualBox).So, after about 10 months, I had ended up with a severely fragmented, Truecrypt encrypted NTFS partition which badly needed defragmenting. Linux NTFS-3G drivers have become fairly reliable, but their reliabality decreases as the filesystem fragmentation increases. And the only OS which can defragment a filesystem of this time is windows NT.
Procedure:
The basic underlying problem is that you need to access your raw device from a windows system that by itself lives in an isolated virtual environment. The SMB/CIFS shares are ok to access data, but NAS Filesystems rely on the servers filesystem and cannot be defragmented.What can be defragmented is a SAN share (iSCSI target), because the protocol by itself forwards the device to the host over a network, not the filesystem.
(1)So first of, make sure you have a virtual machine running windows somewhere. it actually doesn't need to be virtual, it can be a remote computer on the same subnet, but in my case, it is a virtual machine. As I said, I used VirtualBox.
(2)Next make sure the Windows box has access to the same network as your linux host. In VirtualBox I used a network interface in NAT mode. I suppose you could also juggle a second loopback device around on the linux host to fulfill the same purpose and keep the windows box of the public network if that is a concern.
(2.5)If you have encrypted your NTFS partition, you need to decrypt it (not mount it!). Using LUKS, use the cryptsetup command to create a decrypted alias of the partition. If you have used Truecrypt, use it's frontend to mount the partition as you would if you wanted to access data, then unmount the alias from its final mountpoint, thus leaving the unencrypted frontend to the partition intact.
So now you have:A linux host with a fragmented NTFS partition (which might be encrypted) that is not mounted.A windows machine (either virtual or remote) with access to the same subnet as your linux host.
(3)Next you need to setup your unencrypted partition alias as an iSCSI target.
My Linux system has an NTFS disk attached to it. How can I search for all *.txt files on the NTFS partition using Linux?
View 2 Replies View RelatedI installes Ubunu on my Windows XP pro FD and I need to rcover some files , What is the best way tto recover them?
View 2 Replies View RelatedI record my lectures at school using my mobile phone then send them over wifi to my laptop and use a program to do volume correction all in windows. However, I want a exact copy of that folder in my home folder on my ubuntu install on a separate partition.I've been manually copying them over so far but I want to make a script that I can run to copy all new files over. I know a little bit about scripting, mounting the drive and actually copying files is easy, its figuring out how to determine new files and copy only those that I don't know how to do.
View 4 Replies View RelatedAfter several times install & reinstall,i got a stable dual boot vista / ubuntu 10.10.,but i can't access or even see my windows partition from ubuntu,i installed my dual boot with wubu this time,in previous installation when i didn't use wubi , i didn't have such a problem & windows partition with all my files in it (windows files,media ,etc,) was easily accessible from "places" on ubuntu . I already disabled windows firewall & other security options but nothing changed
View 3 Replies View RelatedI have a dual-boot system, Windows XP on primary HDD and Fedora on Slave HDD. NTFS -3G is installed in Fedora, but I would like to hide (or not mount) Windows system partition on Fedora boot, as I have multiple users in Fedora and do not want them to access this partition. I do want to mount/display my NTFS D: partition in Fedora. Is there a way to exclude an NTFS partition from mounting by default?
View 6 Replies View Relatedim trying to shrink my vista partition with gparted inside ubuntu. I run gparted (and yes i have ntfsprogs) but when i select the ntfs partition and select move/resize it brings up free space preceding... new size... and free space following.so when i input the new size the resize/move button greys out and when i change the freespace following it just puts back my original new size and back and forth.from what i have read i need to run the gparted livecd and go from there. is this true? i know how to do it with diskpart in windows, how to in ubuntu and eventually get rid of windows.my system is 64-bit. [URL]
View 5 Replies View RelatedI have a windows partition on my drive, and I want to access it without having to mount it first, etc. There are just two partitions, windows and Ubuntu. I am running Ubuntu 10.04.1 so I want to mount it on startup. I saw this article: [URL] but I don't know if what it describes will work as it's almost 2 years old. I'm not adverse to commands, in fact would probably prefer those.
View 9 Replies View RelatedI tried to search around for a way to access my windows partition from within Linux. I was unable to mount the same using "mount" command. I read of a tool "ntfs-config" as well, this too didn't work for me.
Please share if anyone out there has an idea on how we can access the windows partition (NTFS) from within Ubuntu 10.10 Maverick.
[Code]...