I have somehow ran out of space in my root folder and am not sure how to either increase it or clean out some of the unnecessary stuff.That and im not sure why its full since all my files are in the home folder.
View 4 RepliesI installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
View 9 Replies View RelatedToday I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
So I transfered a few folders with videos in them to the public folder on an Ubuntu 10.04 laptop I have from my Ubuntu 10.04 64bit laptop. When I wanted to delete the folder I didn't have permission so I ran "gksudo nautilus" so I could delete it as root. So I deleted the folder but I did not get the space back!
I went to /.local/Shared/Trash and one of the folders I deleted was there but deleting it didn't get that space back either.
I did some searching but most of what I find doesn't help or tells me to look in the folder /.local/Shared/Trash folder but that didn't help any.
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies View RelatedAccidentally I changed the ownership of all the directories under / to my own instead of root:root. Now I am unable to use sudo and many bad things are happening. Is there a way to revert the changes or change the permissions again to root:root or make sudo work ?
View 3 Replies View RelatedJust installed and started to use the suse11.4 two weeks ago when my Win7 broke down. Now I got a new Win7 recovery disc from my laptop manufacturer, and want to install a Win7 accompanying with the suse11.4.
My question is how to clear up a free space in HD to install win7? Currently, I have 3 partitions that are sda1, sda2 and sda3 with space 2G(swap), 20G(root) and 270G(home) respectively. I want to free up half space from sda3 to install Win7, how to do it without delete the data on it? One weird thing is that my HD totally is 320G, but when I installed SUSE, only 300G was usable and the other 20G is missing until now. The fdisk -l command info. is showed below:
I am completely new to OpenSuse and just installed it. However, I wanted things encrypted for work and chose LVM2 with password encryption upon installation.However, I didn't change any of the values.Now I see that my home partition is only about 30 Go and I cannot mount the oter 300GB that sit on another partition. When I try to mount it through nautilus I have to enter my password and then get :Unable to mount 307 GB LVM2 Physical Volume
View 9 Replies View Relatedso upon install of 11.2, I thought that I would try the LVM option when it asked me how I wanted to partition my HDD. I am using the entire HDD for SUSE...or so I thought. Take a look at how much space I have for my /home partition:
[URL]
Now, I've added up the numbers, and they sure don't add up to 74.51 GB. Any way that I can make /home bigger? It won't let me increase it anymore beyond 7.89 GB, which is a total bummer.
i,m just about to install 11.2 from 4 gig dvd, what is the minimum size to be able to install system, I will be triple booting with Win xp Ubuntu I'm just after reccomended boot size I wanna share Home with Ubuntu, windows will just have 15 gig for a game not using the home hope this makes sense
View 9 Replies View RelatedWhat can i do clear up some space?Is there any way of cleaning /tmp?
View 5 Replies View Relatedopensuse v11.3
I started an update today. Part way through I got the message that there is not enough room on /boot to complete the kernel update. "This can't be good," I thought.
Indeed, there is only 6.4MB free space on /boot of 69MB; at least 9MB were expected. I do not know why the partition is so small. It is formatted ext3.
How do I go about creating a /boot partition with more space?
Here is the current disk complement:
Code:
I tried to install suse 11.4 from live usb when it was installing, it said at one point that there is 0 b available on my disk. It's impossible because I had a partition with 15 GB of space devoted to this installation. My hard drive is 300GB,100mb for system reserved, about 50 + 214 for windows and the fourth partition is extended 35 GB. The extended 35 has 20 GB for FAT 32 and then 15 GB for the suse. And it said there is no room. pressed explore or something from the error message and then the whole computer froze. I had to reboot and the grub was ofc fcked up, nice. So, atm I am running from another live cd. When I tried to boot the openSUSE live usb the usb was ruined.. I don't know what had happened but it tried to load the live usb, it had it's cameleon ture and then error messages that said something about the usb being read only. So, do you have any ideas what might have happened, why did it say there is no room when there clearly was?
View 9 Replies View RelatedI have 40gb of hd and I want Xp and fedora on it. I installed Xp first and now I want to install Fedora 12, every time I chose the space to iinstalll it, it says that there is no enough space to install it, although the xp just took less than 2gb of the disk. How can I resize it so that there is enough space?
View 8 Replies View RelatedI'm running out of space in wubi. Online wubi help didn't help much since they suggest creating extra virtual disk space(similar to having a diffrent partition i guess) .None of them speak about increasing the size of /root disk space(or root.disk). I store all files in space shared with windows or external disk and use ubuntu only to install and use softwares and browsing. So how do increase the available space for installing more softwares?
View 3 Replies View RelatedIve opensuse and windows on my laptop. I hardly use windows anymore but I would like to keep it. Im getting warning messages saying that I only have about 75 MB left on linux. Windows has lots of space available (especially the "d" partition which I use for storing stuff in like music and video) but I do not know how to "claim" that partition for for Suse.
View 9 Replies View RelatedMy root partition seems to missing 1.6 GB of space. From "df -k" I get this output code...
I can't find any rootkits with rkhunter and chkrootkit, and fsck reports no errors.
Does anyone have any idea what might be going on here?
I have been missing disc space in my / partion. Was 20Go.I deleted a unsed partition and then increase my / partition to 133 Go.Did this in yast and can see that the partition has this size. But when I restart my suse, the size of the partition remains to 20Go.
View 9 Replies View RelatedI found what I believe to be odd behavior on an OpenSuSE 11.0 computer today. I needed to add some disk space on one of our computers and here is what I did: This computer had a separate disk for swap space so I deactivated swap (swapoff -a) and then removed the swap entry from /etc/fstab. I then shut down the computer and replaced what was a single disk used only for swap with a RAID1 hardware mirror.
I then booted the system and added a swap partition and another file system on the new RAID1 volume. Even after activating the new swap space with swap on, no swap ever seems to be actually allocated. The swap space shows up in top, free, "swap -s" and vmstat, but never gets used. I realize that a reboot will result in the swap being used, but is there anyway to get the kernel to use the swap without a reboot.
It's probably worth noting that I verified this behavior on a second computer. That is I turned off swap, removed the swap entry in /etc/fstab and then rebooted. Swap is never actually allocated until a second reboot. By the way, this was discovered when some of our users attempted to run java on the system where I did the first work and they got:
prompt> java -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Yesterday, java was working fine and I got the same results on my test computer. Is this a kernel bug or just odd behavior?
I'm starting to push the limit of my /home directory. My machine is Linux/Windows dual-boot. I need to keep Windows as the machine is not "officially" mine, and so might need to go back at some point to a Windows user. All my normal Windows access is via VirtualBox. I have made my Windows partitions as small as possible, and now have an empty D partition as follows:
It's the D* partition that I would like to add to my home directory. Is there an easy way of doing this, or am I looking at a complete re-install of openSUSE?
I have two 250 GB drives setup with hardware RAID 1. I had on sda and sdb: 20 GB swap, 20 GB /, 198 GB /srv all was good until I started to run out of space on 20 GB /. So I booted the server with Suse 11.3 live cd and reduced the size of 20 GB swap to 10 GB and 198 GB /srv to 150 GB on sda and sdb.
All good so far, then tried to increase 20 GB / to 60 GB, but the Partition setup says the Max Size can be 20 GB, I have checked and I have 42.88 GB of Unpartitioned space. I have rescanned, rebooted, Server is still running fine by the way, but the 42.88 GB of free space is not made available for the expansion of 20 GB /.
My machine telling me that my home directory is running out space,It is said 95% in usage.Try to delete the big unwanted files in users (just two user in my machine),df ing, but the home usage status keep on 95%.
View 9 Replies View RelatedI am running OpenSUSE 11.4, and have 2 partition in it, one is / (about 10GB), another one is /home (about 50GB). I usually put into sleep when I'm away from my computer. It had been few days I never shut down my computer, and today I got a warning message mention that my disk space (/home partition) is full. I check my disk space in Dolphin's properties menu for the /home directory, found out that it only used up 10GB disk space. I did a check on the "My Computer" on the desktop, the status is showing full usage (100%) in red color. I did df -h command, the partition for the /home is showing 100% used as well. I don't really know what is going on, and then I restart my PC. It back to normal after I come back to my Linux, which is 10GB disk space used. I don't know whether this is a bug in OpenSUSE or not.
View 9 Replies View RelatedWhen I installed the OS, I wasn't prompted to set the root password. Is this a bug, or did my install hose up?
View 4 Replies View RelatedMy laptop has a 60GB hard drive, which my ex-husband set up with a 20GB partition for Windows XP and a 40GB partition with Suse 11, which suited me fine at the time. However, I'm now finding that I need to install a whole bunch of extra Windows programs relating to my work, and the 20GB partition is no longer sufficient, while I'm hardly using any space at all under Linux.
how I might go about redistributing the space between the two partitions (any other solutions to my lack of space problem also welcome)? Please bear in mind that I'm pretty clueless when it comes to this kind of thing!
We had a perfectly working SUSE OES netware server for some months, and wanted to create a new image backup. Using Acronis Backup and Recovery Advanced Server Software. This worked a treat on our SBS 2008 Server. We went to run it for Novell OES and a system lock up occurred and services such as Iprint then disabled. A server restart recovered the server after a few attempts. We then learnt that the server could not write files to an NTFS formatted USB drive. This was the ideal destination to test the backup. However we could not even write a simple file to the drive without an error message about permissions.
We then learnt that Linux needs a package called NTFS-3G to enable NTFS writing permissions. This did fix the writing issues. We attempted to run another back up which again failed, bringing down the server. We again attempted to reboot the server this time we fail to get to the graphical user login. At the suse Linux Enterprise boot screen we select "boot from hard disc". Which fails immediately with "GDM could not write a new authorisation entry to disk...Error no space left on drive". When the boot eventually continues, a number of things fail with the same message about "No space left on device".
The next message starts "Could not start the X server due to some internal error."
Further to the above, starting "recovery" instead, the checks of partition fail and it seems obvious that the partition definitions have become corrupted. In the expert partion manager the lines for partitions seem correct except that there are no entries for 'mount point' and 'mount by' columns. Trying to edit these lines does not appear to allow entries for mount point or mount by - they are disabled. It seems likely the server is not mounting some partitions at boot which is why the kernel thinks the server is full. Is there some simple way we can use say fdisk to repair the partition definition without loosing anything of the server OS and data ?
Not sure if I have landed in right place for this question .Problem FacedI have 30-40 heavy load (Memory operations on heap) processor running with each having 30-40 threads.In one of the thread (of each process), I have file locking operation as explained below (say in thread T1)Step 1 - Lock the file using fcntl(SETWLK) on file f1, Basically using wait lock.Step 2 - Read/write data from another file f2.Step 3 - unlock the file f1.As the memory occupied by process increased, the swap area used will reduce - this continues for a long amount of period. When the free swap space is reduced to 100 MB free out of 2 G and VIRT reduces to 120MB free out of 17G, for T1 thread, Step 3 is not scheduled for more than 300 seconds after Step 1 and 2.
I want to understand why this behavior is present - as per my understanding scheduling will occur within micro-seconds and we can expect that the T1 thread of all process should be scheduled without too much delay.Additional InfomationMachine Info : (uname -a), Linux linux 2.6.16.46-0.12-smp#1 SMP Thu May 17 14:00:09 UTC 2007 x86_64 x86_64 GNU/LinuxMemory Info :Total Memory is 16GB + Swap Memory is 2GBI want to know why this behavior is observed in SUSE
I am using fedora 12. I got "no space in root directory" warning from the system. When I went through it, I found many of the space has been occupied by /var/log/httpd/error-log file. So I just deleted the file but when I check the space with "df -h" command. It shows 0% availability. The same problem occurred before but it solved when I restarted the system. But how to regain the space without restarting the system?
View 5 Replies View RelatedI am going to create an ubuntu partition just over 200GB.I have 4 GB RAM, so I am going to create 4GB swap.Then I am going to separate the remainder into root and home.Is 10 GB of root enough?(btw, it's going to be lucid)
View 9 Replies View Related