I have a computer a Sound Blaster X-Fi Elite Pro sound card.(pci card and break out box) I have installed the CreativeXFi-kmp-pae driver found on opensuse search for opensuse 11.1 32 bits. Sound is working perfect but I can not see any soundcard under Yast hardware -sound device. I want to use the midi port but it is not working also the volume knob is not working. Doe anyone know how to solve this.
View 9 RepliesI have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it. The laptop is a Compaq Presario CQ45-307tx (more specs at link below) [URL] The first thing I tried was I updating the alsa firmware using the konsole command "zypper install alsa-firmware". The firmware updated fine, but still no sound. The next thing I tried was editing a file based on the advice found at the link below. [URL] This didn't work either, but I wasn't too optimistic to begin with due the differences between our systems.
View 7 Replies View RelatedI have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
Has anyone ever experienced an issue with a Creative Sound Blaster Live! Value Dell OEM sound card, models SB0200 and SB0203, using the EMU10K1X chip that causes any multimedia application (Amarok) or flash web site where the audio plays back way too fast?
I tried this on two different Dells, a Dimension 4600 and Dimension 8300. The only variable that was a constant was the Creative card. I took the OEM card out and put in another card, audio playback speed was fine. The only reason I am asking, even though the OEM card is slightly inferior, it has the front panel multimedia connector pins on the OEM card. Thus, if I use another card, either the front panel multimedia jacks become unusable or I have to turn on the integrated sound in the BIOS and run two sound cards.
I'm running WinXP Pro on a Dell XPS 710 with a Creative X-Fi sound card. Been away from Linux for a year or so since I got this machine and would like to come back. Can you suggest/recommend a sound card (5.1 preferred) that has a high success rate with the Linux OS. I will probably install Open Suse or Kubuntu. I'm more than willing to dump the high end sound card for less flash.
View 3 Replies View RelatedSound problems in Fedora 14.
Before Fedora 14 i have Fedora 12 and all was ok with sound. Starting with root account surprize i have sound. But after playing a song in xmms, sound is dead. I have tested sound in Windows and is ok.
I'm running Ubuntu 11.04. I had recent problems with my on board sound card, so I decided to stick a Sound Blaster Live (SB0060) on my home theater PC. Sounds, great I hooked up the coaxial cable to my Sony Amp, and movies play in 5.1 DTS glorious sound.
PROBLEM: Occasionally I get this weird sound loop were the sound repeats continuously until I either mute the PC, or play another sound. if I do the "Speaker Test" in the Sound preference a few times, it will eventually be caught in a loop as well.
This only happens while the sound card is passing PCM (stereo 48Khz) sound to my amplifier. It does not happen in AC3 or DTS passthrough. I've looked in the forum and in google andhave not found a solution. Any suggestions as to what can be causing this?
Sound is not working. Clean install new home. Fully patched and multi-media stuff installed. It works in test in yast but nothing else has sound. There is a loud click when KDE starts. Also there is a delay before I can do anything. Tried changing the backends no luck. Also tried disable of phonon in Yast but have nor tried to remove it yet. Perhaps I should.
sound device nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
why is there two different buttons to do the same job? i made the default sound device creative x-fi with the kmix in the right hand corner but i still couldnt hear any sound. i then found out from another forum thread in this forum that to change the default sound device you have to go through yast. it works now but it is confusing. same for networking. network manager is installed by default in 11.4 but if you click on the icon in kde tray it says no network interfaces found. you then have to go to yast,network and click the radio box for network manager then click on ok. i hope in future releases of opensuse there will be one way to change the defaults.
View 2 Replies View RelatedI'm using openSUSE 11.4 x86_64. Today I came home from work and opened up Banshee... and to my surprise, nothing came out of the speakers. This morning everything worked just fine and my computer was left untouched since then. I found out that sounds works fine in Ubuntu and Windows 7, but in openSUSE... nothing. Well I tried deleting my sound card in YaST, and then reconfigured it. I used the Quick Automatic Setup option and then played a test sound. It worked so I opened Banshee again and picked a song to play... and still nothing.
Running speaker-test in Terminal returns no errors and no sound. In superuser terminal it returns "Playback open error: -111,Connection refused" and mplayer (in superuser terminal) returns "[AO_ALSA] Playback open error: Connection refused."
Are there some additional steps I should take to diagnose and/or troubleshoot the problem? I only know the problem is native to openSUSE, my speakers and sound card are both functional and sound works fine in Ubuntu 10.10 and Windows 7.
I have a sound card Sound Blaster Audigy SE, and I would like to know if this sound card is compatible with Debian under Pulseaudio or ALSA ?
View 8 Replies View RelatedI just did a linux install..have a SB Live Model EMU10K1 soundcard...does anyone know where I can find drivers for this card..
View 4 Replies View RelatedI've tried googling, but can't manage to figure out how to change the priority order of the sound cards in yast. From yast > hardware > sound, I can see the (default) internal audio from the motherboard, and I can see the usb headset that I would like to be using as the default. How should I go about changing the priority order on these devices?
View 3 Replies View RelatedI want buy this sound card - Sound Blaster LIVE 5.1. I check on the Internet [url]
So, Alsa support this card or not ?
Whats the sound blaster xtreme audio pci module name ?
View 1 Replies View RelatedI've been trawling the webs and trying to find information on how to configure the flexijack on the Sound Blaster X-Fi XtremeGamer Fatal1ty Pro card to allow microphone input in Fedora 13 64-bit. Does anyone have any experience with this?
Both the Creative released drivers 1.00 and 1.18 (beta) will not install for me, but I don't think this is the problem. Not sure though.
I have an external sound blaster x-fi sound card for my laptop, however the software/drivers don't seem to be supported for Linux. Is there anything I can do to get this to work? I also have wireless speakers that connect to it so it would be a shame to not get them to work.
View 1 Replies View RelatedI have installed a Musix 2.0 distro which is based on Debian. My problem is that the sound card which is a Creative Sound Blaster is not either set correctly or does not have the right driver. It appears in the system as Audio PCI 128 and with the driver:
snd-ens1371.My mother board has over 1gb ram with a 900 mghz processor by AMD. No sound onboard, with an inserted sound card.
I've NEVER had a single problem in any distro with my Sound Blaster Live (Yeah; it's old school but works). However, my brand new install of Debian Squeeze (minimal with LXDE) is giving me crap. Alsa is up and running and some reason it doesn't want to use my SBLive... It's STUCK on my X-Fi card. Before you say take the XFi out; it's my Win 7 card.. I need to have it and don't want to have to pull it all the time...
Is there any other file like alsaconf? I don't know where to start. Maybe someone can shed some light of where I should go to attack this problem. I've never had an issue in ubuntu, fedora, freeBSD never gave me trouble. I usually simply use alsamixer to switch and never have an issue.
I've recently installed Linux Mint 8 64-bit on my computer and getting my sound card to work. I've been searching around the internet for solutions but I know next to nothing about computer audio.
My sound card is a PCI Express Creative Sound Blaster X-Fi Xtreme Audio. Came with my computer. Told it uses the SB Audigy chipset. Using the onboard audio is not an option. The card shows up in Sound Preferences under the Hardware tab, but I cannot get sound from it. Here's what they told me to do:
Install the karmic alsa backports through the Terminal Install hidden Level 5 updates to update the kernel
Disable every audio device except the SB card (the others are onboard and HDMI) Check volume levels in alsamixer, PulseAudio Device Chooser and Volume Control I also tried to install the OpenAudio driver (not sure, will double check), which crashed Linux every time I try to activate it.
Does anybody know if it's possible to get the volume control knob (the one on the device) on the USB Creative Sound Blaster X-Fi device in Ubuntu 10.4? The sound is working great for me, but I actually bought it mostly for the volume so I'm hoping there's a way to fix it before I return it.
View 1 Replies View RelatedI found out there is no way to install headset's own drivers. At least I am looking for a way to switch its 5.1 property on. Is there any way for it on ubuntu 10.04 with pulse or whatever works?
View 1 Replies View RelatedI've been using Ubuntu 10.10 for a few months now (after about a 5 year hiatus from all things Linux) and when I first booted up, everything worked perfectly out of the box except audio. I have a Creative Sound Blaster Audigy 4 sound card, and after searching the forums I used [URL] to successfully get my audio working.
Now, I'd like to try Kubuntu. Like Ubuntu, when I use the live CD everything but audio works. However, I can't install gnome-alsamixer like I did to fix the sound under Ubuntu (of course, I may not have had all the repositories enabled, I didn't think of this until later). Also, KMix didn't seem to offer an option that worked.
So I have this nice headset. It's a Sound Blaster Arena. It plugs in via USB.
So when I plug it in, it isn't recognized. Then Ubuntu locks up after 20 seconds.
I am using 10.04 LTS
What should I do??
I have a serious problem with my sound card and Ubuntu 10.04. In the others distros (Gentoo, Sabayon, Fedora, Puppy...) the mic run very good, but in Ubuntu i can't record any sound. I can ear the sound exit from the speaker, but with sw like Sound Recorder, Audacity and Skype i can't record the sound. I tried EVERY setting in alsa mixer/Gnome alsa mixer but I can't resolve the problem.
View 1 Replies View RelatedI'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies View RelatedI have a USB sound recording device and I use it as my main Sound output for Windows and will use it for OpenSuSE Linux: The problem is, I can't add the device through the "Sound" in YAST. Here is the following method I use:
Opened YAST
Clicked Sound under Hardware
Clicked Add to add device
Chose Tascam and US122/224/428
Chose Quick Automatic Setup
Then notification comes up if I want to permanently remove existing sound cards, I choose NO (this is the built in sound card of the mother board) Then Hardware setup shows as error with the following message, "The Kernel Module snd-usx2y for sound support could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters." I am thinking that it failed because I'm using an internal sound card instaler instead of a USB device installer. Is there a Manual solution to this? Instead of using the Quick Automatic Setup on step 5? When I click Hardware Information in YAST, the device is being listed on the USB devices.
I have a Western Digital Elite external HDD given to me by a co-worker that cannot remember their passcode to unlock the drive.
The external HDD is an Western Digital Elite Model = wdbaac6400ch
i am trying to compile gcc 4.4.3 and getting errors:some of my config lig file output is :
## --------- ##
## Platform. ##
## --------- ##
hostname = amd00.linuc.elite.in
uname -m = x86_64
uname -r = 2.6.9-42.0.2.EL_lustre.1.4.7.3smp
code....
well im a recent convert ubuntu after loosing it with windows haha but im having some trouble..i have a DELL dimension 1100 pentium 4 machine.i cant get the internet to work i suspect that its driver related and i downloaded some drivers but have no idea how to install them so if someone could point me to a post that'd be great =)secondly i have a Microsft Elite Blueltooth Keyboard and mouse and i managed to connect them but they tend to disconnect themselves every now and again.i suspect this is also driver related but i also secrelty think its cause its made by microsoft.
View 8 Replies View Related