OpenSUSE :: Debian Era "learned" To Use That Gnome-commander Program For Transferring Files?
May 3, 2011
The problem with the kind of say I'm a Debian era "learned" to use that gnome-commander program for transferring files. The problem has now become a fact that when the connector for the USB stick machine, so it appears pcmanfm file management, and yes it works fine (ie I use opensuse 11.4 LXDE desktop), but the gnome-commander:in the sticks did not appear at allAnd why say that matter could be caused, and will be able to do something about it?
View 1 Replies
ADVERTISEMENT
Nov 19, 2010
Ubuntu 10.04 LTS Lucid Lynx
Tux Commander 0.6.7.0-dev
When I use the default graphical file manger in Ubuntu, holding down the shift key and pressing the up or down arrow keys will select multiple files. This doesn't happen in Tux Commander or Gnome Commander. I tried looking through the preferences of each application and googling on my question. No dice. Is there anything I can do to get this functionality?
View 1 Replies
View Related
Jan 26, 2010
Is any easy way to restore deleted files with Gnome Commander (v1.2.8.2)? I have external drive with two partitions: FAT32 and EXT4. I was using GC on Ubuntu 9.10 and it was working fine, today I installed openSUSE and GC is showing only EXT4 partition. Nautilus is showing both and it is working fine though.
View 2 Replies
View Related
Feb 19, 2010
When trying to create a new compressed/archive file in Gnome Commander (GM) the file is created but the selected files are not added. I can open the new (empty) archive file and then add files to be compressed. I have tried using several different formats (zip, tar.bz and others) with the same results. The "file roller" is shown as a plugin but has no configuration other than the compressed file type.
View 2 Replies
View Related
Apr 8, 2011
gnome commander does not start as root. It started before. Not so long ago i restarted my pc, and i think gnome-commander (as root) did not close. And now it wont start. I started it as: su -> password -> gnome-commander Where can i check or what command should i run to help u guys diagnose the problem.
P.S. i tried to run nautilus as root but that did not work either, and gave me these error:
4 errors of this type: (nautilus:8372): Eel-WARNING **: GConf error: ...
3 errors of this type: (nautilus:8372): Unique-DBus-WARNING **: Unable to connect to ...
View 6 Replies
View Related
May 17, 2011
GNOME commander (latest stable version) does not show mounted volumes at panel. OS: openSUSE 11.4 GNOME 64bit
View 3 Replies
View Related
Aug 22, 2011
I have two different Linux operating systems (on two separate partitions) on my laptop. One is open SUSE and the second is PCLinuxOS and I frequently have to update files and folders from one to the other (the consequences of trying to keep both current!). When I am using openSUSE and want to access folders/files on the other OS, openSUSE asks for SU authorisation to access the other . . ./home file. Until recently, I could open ALL of the folders on the (other) /home file but now I can open some folders but not others. The Dolphin screen shows a warning at the bottom that "Could not enter folder /media...... " ! I can then only access the folder by going into the menu and using the 'File manager -Super User' mode ..AGAIN.
I suspect this action is necessary because I have had to previously open these specific folders in 'Root mode' to be able to 'paste' the moved file! I would like to avoid this (double) 'messy' action - how to change/avoid this My system is a 32bit openSUSE 11.4 with KDE 4.6.0 and the 2nd OS is also KDE 4.6
View 6 Replies
View Related
Aug 27, 2010
I have been using gFTP to transfer files to/from a windows machine, but have run into a problem and wanted to try FileZilla. Using YasT (Package Search) I found and selected "filezilla - A GUI FTP and SFTP Client", and proceeded to attempt to install it. The outcome is:
Attempting to install FileZilla under YasT:
Download failed: File '/repodata/repomd.xml' not found on medium url.
View 3 Replies
View Related
Jan 4, 2010
I hope you will be able to help me, because a day ago asked the same question to russian linux users and did not give me an answer at all. I am using xubuntu on my laptop and am completely sick and tired og thunar file manager. Found what I want - it is Gnome Commander. But really cannot find out how to make it default, especialy I would like to open it by clicking the button Folders (Places) near the Main menu button (hope I described it correct).
View 1 Replies
View Related
Dec 16, 2009
I've started development on a ARM board. The ARM board displays it's command prompt through it's rs232 output. So I open putty/minicom (rs232 display) and can see and interact with the ARM linux system through my PC. The ARM root fs is on a USB pen, So I cross compile on my PC, then plug the pen into my PC copy the exe into the home/usr etc folder. Then unplug. plug it into the ARM boot the ARM and from my PC rs232 window can run the code. However plugging/unplugging is taking an age, I'm sure there must be a way to transfer the exe across the rs232. I've tried to use putty minicom to do so throught various methods xmodem etc but don't seem to be able to. I think I must have to do something on the ARM end but am unsure what?
View 7 Replies
View Related
Jun 2, 2010
How do I disable the file move/copy confirmation in Gnome Commander?
View 4 Replies
View Related
Feb 2, 2011
I have downloaded the latest gnome commander source code from the gnome commander home page. Following the instructions in the readme I have extracted it from the tar ball and changed to the top level directory of the source code. I execute ./configure and get a bunch of "checking" results.
Quote:
bash: ./configure: No such file or directory
ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9/src$ cd ..
ken@ubuntu:~/Desktop/gnome-commander-1.2.8.9$ ./configure
[code]....
I find Makefile.am and Makefile.in present in the directory. I generally install from deb packages. Still, I don't think it should be this hard to compile a package given the seemingly simple directions provided.
View 4 Replies
View Related
Nov 26, 2009
Trying to install gnome-commander, but my terminal hangs with message
Loaded plugins: refresh-packagekit
I tried to google but did not find much info..I am using Fedora 11
View 3 Replies
View Related
Mar 28, 2011
I have once tried transferring files from Redhat 9 web files to Centos 5.5 /var/www/html/ directory. Ok... LAMP is installed and working fine. httpd / apache is running and mysqld is installed without root password. Now I wan't to transfer it again to secure the database from Centos 5 to fedora 13. But when I tried browsing the web to check the web files I can only see these:
[Code]...
View 10 Replies
View Related
May 6, 2011
I used Total Commander and connected FTP to write website. Today I accidently deleted some files. How to recover them?Recover using Total Commander or log in Putty? If using Putty, what commands are used to recover?
View 1 Replies
View Related
Mar 20, 2010
I've resolved to move onto Ubuntu, but I haven't done so quite yet. One question that sprang to mind was the transferral of files from the Windows OS to the Linux OS on the same machine, if it's possible. I'm thinking something like the dual partition, though I suppose Copy/paste wouldn't work.
Another possible solution was using dual partition and then Windows SCP, but everything I've read on the topic indicates that SCP works by finding the (different) host address of the computer; thus it would read my machine as one, even if I'm running Ubuntu on it as well.
how to transfer these friggin' things.
Part of the reason for my query is that I am quite strapped financially and am unable to backup my files on an internet service or on discs.
View 4 Replies
View Related
Mar 13, 2011
I want to convert my wife's computer from MS XP 2003 to Ubuntu 10.10. I have saved "My Documents" to an external hard drive. How will I go about transferring these files to Ubuntu? Do I just pick individual files and go to "Save As"? Can I just transfer them en mass?
View 6 Replies
View Related
Dec 10, 2010
when I try to transfer files between flash drives, it starts to copy normally and then after few seconds it starts to lag. Transfer rate drops with each second by 0.2 MB down until 5 MB/s where it completely hangs. This happens to every single flash drive I put in and this is annoying because I have external HardDrive connected over USB port and I keep all my data in there, so when I try to transfer the files from the hard drive to the flash drive - it lags and hangs. Same thing if I want to copy from internal harddrive to flash drive. Although everything is fine when I copy from the flash drive to the internal harddrive and everything is fine when flash drive or the external harddrive is alone (no other flash drives or something is connected).
I am also using Ubuntu 10.04. I have tried transfering files on my netbook running ubuntu, because I thought that it might be a USB port issue but the same thing happened on the netbook too...
View 1 Replies
View Related
Aug 13, 2011
I've tried FXP and rsync, none worked and I can't find much info on how to get them working, just alot of google results with people in the same situation as me!
I want to transfer files from 1 remote server to another remote server... a fairly easy task in which I'm sure there's an easy solution, I just can't find it.
View 4 Replies
View Related
Nov 5, 2010
I am trying to download a EBCDIC file from z/Os to UNIX using FTP in ASCII mode. The problem I am seeing is; when UNIX FTP Client issues a get; UNIX CPU goes to 100% CPU utilization when transferring a file in ASCII mode. I have done packet traces using wireshark and noted that z/OS Server is translating the file to ASCII before putting it on the wire, however when UNIX FTP Client gets the file I believe that the UNIX FTP Client is again translating the file to ASCII causing the 100% CPU utilization. I need verification that this is what is happening, and is there a way of getting around this other then transferring the file in binary mode then doing a EBCDIC
View 1 Replies
View Related
Aug 17, 2010
I have a linux box that I plan to use primarily as a server. I also have another machine that dual boots Windows/Linux.I would like to have a way to backup my filehe Windows/Linux box onto the Linux server. In other words, I am assuming the hardrive on the Windows/Linux box could fail at any time and I want to have a backup of important files.Should I set up an ftp server to do this? Are there any security issues that I need to be concerned about if the files contain sensitive information etc?
View 14 Replies
View Related
Mar 16, 2011
This problem has been bugging me since KDE4 starting shipping. In konsole, if you use the default black on white profile, and you start Midnight Commander, the color of the MC screen is the default blue color it has always been. However, if you change to the green on black profile, which is the one that I prefer, and you start MC, the blue changes to some unreadable light robin egg blue which is horrid.
I'm making a huge assumption here, but it looks like something is off with the green on black profile in Konsole. Try it yourself and you will see what I mean. This only started with KDE4, but it still persists through every version to current.
View 4 Replies
View Related
Oct 5, 2010
I want to transfer an arbitrarily large file (say >20GB) between 2 servers. I have several considerations:
Must use port 22 (ssh) because of firewall restrictions
Cannot tax the CPU (production server)
Memory efficiency
Would prefer a checksum check but that could be done manually
Time is not of the essence
Server A and Server B are on the same private network (sharing a switch) and data security is not a concern, Server A and Server B are not on the same network and transfer will be via the public internet so data security is a concern, My first thought was using nice on an scp command with a non-CPU-intensive cypher (blowfish?). But I thought I'll refer to the SU community for recommendations.
View 1 Replies
View Related
Mar 2, 2010
I am looking to set up a home network server on an old PC. I want to be able to access files on the network hard drive in the PC, stream video or music from the "server", and use the computer as a regular desktop connected to TV as a monitor. I tried setting up an FTP server and that worked for transferring files but failed to get a good connection for streaming or fast transfers.
Was less then 1MB a second. I tried setting up a shared folder but ran into several permission errors between the host PC and the laptop that that connected to the shared folder. which way to go with this to get what I want out of it. I know if can be done just not sure how to do it.
View 9 Replies
View Related
Aug 11, 2010
The computer and phone are paired, and transfer starts, but after 4096 bytes it says:Transfer finished with an error: Error sending object. I'm running 64-bit Lucid and Maemo 5 on the phone. Here are some of the things I've tried, following the docs, and the errors I get:
Code:
~$hcitool info 3D:F7:2A:60:7A:40
Requesting information ...
[code]....
View 3 Replies
View Related
Feb 6, 2011
Every time I attempt to transfer over a large file (4 GB) via any protocol, my server restarts. On the rare occasion that it doesn't restart, it spits out a few error messages saying "local_softirq_pending 08" and then promptly freezes. Small files transfer fine.
Relevant information:
Ubuntu server 10.10
Four hard drives in RAID 5 configuration
CPU/HD temperatures are within normal range
View 7 Replies
View Related
Aug 9, 2011
I've got a quadcore PC, 2gb ram pc running ubuntu 11.04 with samba set up on a shared folder - the plan is to share files and media between myself and my housemates. However, I do not have the router attached by ethernet, I am connecting to the router (in another room) by a d-link wireless dongle.
I can access the share without real issue from my windows laptop and other computers in the house share I'm part of, and I can happily transfer a text file here and there, but it seems to be anything over 20mb will not go. All the files I am trying to transfer are >1gb and it's driving me mad.
After some decent transfer rates of around 1mb per second it just freezes up. The screen attached to the actual server goes blank and the host becomes unreachable by ping.I'll be happy to provide any command results or anything to get this working. any assistance would be welcome!
View 2 Replies
View Related
Jan 22, 2010
I am running a linux server and am familiar with scp somewhat, and have used it successfully in the past. But that was talking to another linux server. Thing is, here I need to talk with a Windows server. How do I do that. In addition, their server may require a VPN, which seems to add another layer of complexity.
View 3 Replies
View Related
Jul 20, 2010
This problem is not exclusive to Ubuntu, I've experienced it in Windows and OSX as well, but it seems that almost every time I transfer a large number of files (i.e. my music collection) between my desktop computer and laptop via my external hard drive, I end up losing files for no reason. I usually don't notice the files are missing until later on, because I am never informed of any data loss. Now, every time I make a large transfer of files, I just do it two or three times to ensure that I don't lose any files.
View 2 Replies
View Related
Mar 10, 2011
I downloaded Amarok 2.4 today and am attempting to use it to sync my music to my iPod Touch. .mp3 files transfer perfectly, but for some reason any .m4a file is being reassigned a .mp4 extension and being relegated to the 'Video' app on the iPod. I do realise that an .m4a is just .aac audio in an mp4 wrapper, why Amarok and/or the iPod is deciding to treat them like a video instead? It's doing it both to my own ffmpeg-encouded .m4as as well as unprotected .m4as from the iTunes Store (relics of my time on Windows). Anyone know what might be going on with this? Ubuntu 10.10 NE, Amarok 2.4, iPod Touch 2G (... possibly 3G, but I'm pretty sure it's a 2G) running firmware 4.2.1
View 2 Replies
View Related
