I cannot login to kde with my username, even in failsafe mode.
When I'm trying to do it I get a blank screen for a sec and fallback to kdm.
I can start kde as mythtv user, and I can also start plasma-desktop manually from gnome3.
I tried to remove .kde4 folder but nothing changed.
I cannot see what the problem is here. I have installed MySQL 5.1.36 via YaST on my openSUSE 11.2 (32-bit) system.I can log in as root. I can "create user MY_user identified by 'my_passwd';" and a new user is created. But I cannot log in to the database using that new user name. I keep getting the message:
Code:
> mysql -b -u MY_user -p
Enter password:
[code]....
I have two uesers on the syste - me (Adam) and the root. when I log in as root where is the admin user contents? in windows its under users. in suse it should be under users. but where?
View 2 Replies View RelatedI have installed OpenSUSE a few months ago and worked fine. But from yesterday i can't login with root user. I received the message:
Login: root
Invalid user name
I have no question for password neither.
On openSUSE 11.4 KDE, is it possible to show user pictures in the Login screen? I added a picture to my user account in the "Password & User Account -- KDE Control Module" but when I logout the picture does not show in the Login screen.
View 1 Replies View RelatedI just installed 11.4 on an old hard drive, probably with 11.3.
All works well, but I can't get the nice icons for user login in kdm.
Of course, I tried to change this in kde system config, but with no result. In fact what I do there do not change anything.
I suspect some sort of permission problem, but how can I simply reset all the global kde settings (The problem arise before login)
How can I enable "Auto Login" for root user?In " Yast --> Security And Users --> User And Group Management --> Expert options --> Login Settings " is just my own user and there's no root user to choose.
View 9 Replies View RelatedI'm using Gnome as my desktop in openSuSE 11.2. How do I set my login so that all users are not shown?
View 3 Replies View RelatedI was logged in, but had not used the computer for about 48 hours. When I 'woke' the system, I could see that Thunderbird and Firefox were active, just as I had left them. I moved the mouse, the screen went black and the mouse pointer was visible (and could move). The system stayed like this for about 2 minutes, then wend down completely. I cut power, booted and got the login screen. Each time I put in my password, it looks as if it is loading but then just goes right back to the login screen. I have no problem logging in as root.
View 9 Replies View RelatedI have installed OpenSUSE and could able to join to Windows 2008 domain but I am not able to login to SUSE system using domain ID. It is showing "Unable to authenticate user."
View 2 Replies View RelatedI need to run a script (which requires root privileges) on login per-user only. I want this to runtomatically so I'll add an appropriate line to .profile.A couple of questions:1 The easiest way I can think of to run the script as root is to setuid, but I know there are security concerns. Is there a better way
View 6 Replies View RelatedI am not sure if anyone here has any experience with Kaspersky Anti-Virus for Linux but my problem relates to that product.
I am running 11.2 openSUSE and after installing the latest version of the Kaspersky product in question, I went ahead and restarted the machine. At the logon screen, when clicking my user name to log in, the password box would not display.
I tried clicking on the other option and trying it that way and after putting my name in the username box, the machine just started thinking and thinking and nothing happens.
I also tried logging in through terminal service but it would not recognize my password to be correct.
I really need to log into my username since I have important files on that Linux partition. I tried mounting this partition in Windows since I have a dual boot setup but I can only view the folders of the partition and not the contents.
I can't log into my normal user account at bootup; it just bounces back to the login screen.
However, I can log into the user's terminal window from the root account.
I've tried deleting and re-creating the user, but to no avail.
Is there some special file that I could delete before re-creating the user?
The one that holds the (corrupted) authentication data, perhaps?
Can someone help me with enabling the user login screen on boot up please
View 5 Replies View RelatedWhen opensuse boots up and shows the login screen. The login screen shows all configured user accounts to select from.
How would I hide these accounts for opensuse 11.3 with KDE and opensuse 11.4 with LXDE.
Today I have installed Linux SUSE 11.2 . At installation, I was asked for user-name and password. I edit this correctly.
At the end of the installation, the system reboots until the mask 'user name' and 'password' will be displayed. When I edit my user-name and the password the system said, that the login is not correct.
First, I think, I have forgetten my password an do a new installation of Linus SUSE 11.2 . Whatever, the same problem ist still there.
Does anyone know what is the best open source proxy solution out there? What we need out of the proxy are the following: Access Control - There should be a web interface for managers to login and create proxy user ID's for external people Good password complexity requirement Lock down the allowed websites
View 1 Replies View RelatedI can't log into my normal user account anymore, though I can log in with root without any problem. When I enter my normal user name and password, the screen blinks, a black page appears and after a couple of seconds I get the login screen again. I deleted /tmp files but no changes. I tried to login using command mode. So I hit Ctrl-Alt-F1 and log into root in command mode, then ran init3, then switched user to my normal user and ran startx. It worked and I logged into my normal account, but I can not do this process every time. So, what is the problem? How can I solve this problem? I used to work with my normal user flawlessly. I installed a bunch of software and also copied some folders to my home directory, but I don't know whether these activities caused the problem or not. I'm using KDE4 under openSUSE 11.2.
View 9 Replies View RelatedI am using the sudo command to log on locally as another user by the following command:
sudo -u theotheruser -s
or
sudo -u theotheruser sh
As I see it, this initiates a new shell with the mentioned other user.However, this doesn't load that users profile from his home directory.Is there a way to automatically read the users profile when login in with selected command? I am mostely interested in getting a working prompt when logged in.
yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
I'm seeing really bad user login format under a standard installation and am wondering why ubuntu does this as default. I have noticed that the graphical login for gnome sizes itself to accommodate a user's exact password length. This indicates to me that somewhere on the unencrypted part of a standard installation with user encryption contains at least some indication of the content of the password length which seems a security flaw even if not a complete hole, it majorly reduces the number of attempts a cracker would have to cycle through.
And that's assuming that *only* the length is contained. Furthermore it seems that it would be MUCH better to simply display the number of characters entered into the pw field and allowing the gui to expand itself from an fixed size as the field is filled out so the the user still receives visual feedback for entering characters. Either a simple character count display should be entered into the field or a 10 dot to new line so that one can visually quickly count the number enter by multiplying from a 10base graphical observation.
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies View RelatedI have a network set up that has been working for around a year with no problems but has now developed a login problem. The system was set up with a main server with all users on it and another PC located elsewhere that people could log onto using there personal login and password that then gained access to the account on the main server. This remote PC has now got the problem. When you try to log onto an account it comes up with the message "your session has lasted less than 10 seconds. If you have not logged out yourself this could mean there is a installation problem or that you are out of disk space."
Error message says that no profile for the user can be found and it couldnt create per-user gnome configuration directory. I can log on as root onto the remote PC as it is obviously a local account but all the account on the main server are not accessible. From the root account I can see that the connection to the server is OK and I can actually log into the accounts on the server using the failsafe session so the physical network is OK.
I never built or designed this set up and to be honest I normally work with windows so its all a bit strange to me. Both PC's run Centos 5. I have checked the messages log and there doesnt seem to be any indication of a problem. Just that it stopped connecting from the remote PC. The accounts are all active on the main server itself and have no problems being accessed.
Is it possible "reset" all (X, GDM related) permissions/settings of one user? What would cause one specific user not to be able to log into anything via gdm/the login screen? After providing the proper password, the screen goes black and then jumps back to the login screen. No session alternative works, not even xterm or gnome failsafe. I can however log in via the console (Ctrl+Alt+F6, recovery etc). With another user I can log in via GDM just fine, and deleting and re-adding the "broken" user doesn't make any difference.
Some (maybe) relevent logs:
part of syslog:
Quote:
Dec 12 01:20:58 <specific user> pulseaudio[1358]: core-util.c: Home directory /etc/timidity not ours.
Dec 12 01:20:58 <specific user> pulseaudio[1358]: lock-autospawn.c: Cannot access autospawn lock.
[code]....
Prelude: OpenSUSE 11.2 (2.6.31.8-0.1-desktop), installed Novell client 2.0 SP2 (novell-client-2.0-sp2-sle11-i586.iso).
I found that if any usual user is logged into a NDS-tree, then _local_ root has full access to user's network shares, including the user's home directory located on remote Netware-server. Is it by design or
have I missed something? Nevertheless in windows local admin has no access to network resources mounted of any other user. If you runas shell (as admin) then admin in principle can't "see" network shares which were mounted (connected) by other users - they are accessible ("visible") per session.
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
what is the correct way/procedure to re-create a user home directory. For instance, on a Mac/Windows machine, i would just rename the existing user profile [home dir], and then just log back in as the user - job done. On OpenSuse/Linux, it seems it does not work that way..?! When i try to rename my home folder to say me.old via root, and log back in as me, i get all kinds of errors. Opensuse does create a new home dir, but it appears not properly.
View 9 Replies View RelatedMy OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View RelatedWhen I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
After a hard restart (xubuntu 11.4) I found that when attempting to login at the standard splash, it would flash vterm7 (the logs from boot, with some new stuff added, none of which looks unusual) and kick me back out to the login screen. I can login on a vterm and in a recovery console, but not into xfce session or xubuntu session.
I have tried removing ~/.cache/xfce4 and ~/.config/xfce4 along with ~/.cache/sessions.
I made a new user and can login to xubuntu under their name.
Restarting gdm, or doing service gdm stop and startx don't work.