Hi! I'm an opensuse noob, and I'm having trouble figuring out how to associate .avi files with VLC. In Yast, I've tried to use the custom command setting to start VLC instead of Totem, but a double click on any avi file starts BANSHEE instead of Totem OR VLC. No clue, here. I can't find where to specifically associate a file extension with an application, as opposed to the very high-level settings in Yast.
View 9 RepliesAfter upgrading to 11.2, I get the following error when starting any xclient. Worse, its usually repeated a few times for each client.
Xlib: extension "Generic Event Extension" missing on display <my_ip>
I get this both when using Xming and nomachine.
Running OpenSuSE 11.2 32 bit dual boot with XP. 3Com OfficeConnect Wireless 11g USB dongle connects and works happily in XP. Can not get it to associate with the same AP in Linux.
Device identified as:
Device 3CRUSB10075 wlan0
Driver zd1211rw
Appears to be installed, to the extent that it sees the broadcast SSID. Output of /usr/sbin/iwlist scan correctly identifies the ESSID and encryption (disabled) More particularly, /usr/sbin/iwconfig outputs that the "Access Point: Not-Associated"
linux-tgb6:~ # /usr/sbin/iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
I trying to read a file with an .odc extension.Using openOffice Calc, However there is a of garbage and irreadable characters, I found out it is a Microsoft office data connection file. Is there a way around it?
View 4 Replies View RelatedI upgraded from Firefox 5.0 to 6.0 and now the SUSEfox Extension is no longer compatible.
View 5 Replies View RelatedI can install the extension MozillaThunderbird Lightning for opensuse 11.3 and Thunderbird v3.1.1. I find on the web for 1-click install is for openSUSE 11.2.
View 1 Replies View Relatedpoint me in the direction on where to get 64 bit lightning?
View 5 Replies View RelatedI have no hair any longer on the sides of my head... after trying to deal with this problem. I have installed apache2 on a SuSE 11.3 box, with php5, php-pear, php-gd, etc, and I cannot get php-soap to get recognized. Do I need to see the soap.[URL]..When I run an installation wizard for the web app I am planning to host, and it says that there is no soap installed. When I place soap php-soap php5-soap in the APACHE_MODULES of /etc/sysconfig/apache2 (just to make sure at least one is the right name) and restart apache2 I get error messages that say, soap (or php-soap, or php5-soap) is not installed, so its being ignored. When I run my phpinfo.php script, I see PHP is working, and soap is one of the successful modules (!?).
So, why can't apache see soap? I can find my soap.so within /usr/lib/php5/extensions/soap.so (how would I successfully load that into Apache, when it starts? I have been using yum, so I went to yast, and installed php-soap again. restarted apache, and still no success.
When I try to get to the configuration of my monitor by using KDE Settings -> hardware -> monitor, I receive the msg: "Your X server is running the RandR extension at version 1.2 or greater which doesn't have any configuration yet." and it refuses to go further. What does this mean and where should I configure it? When I use Yast, Sax2 starts normally.
View 9 Replies View Relatedim trying to install tine 2.0 on a webserver at my uni but i need to install mcrypt extention i also get an error message with phpmyadmin. the server has php 5.2.8 installed and Apache 2.2.10.
i have followed a guide found at this url but i dont know how to rebuild php. [URL] i have downloaded and installed
libmcrypt-2.5.7
mcrypt-2.6.4
mhash-0.9.9.9
i uncompressed in the pacakages in thr root folder /root/ then cd ed in to there root folder ran these commands as per the guide:
./configure
make
make install
ldconfig
I've verified that xorg-x11-libs is installed. This package provides libXrandr.so.2. However, when I run a program, in this case the python script for blueproximity (start_proximity.sh), I get the error in the title.
Code:
grep -ni randr /var/log/Xorg.0.log
237:(==) RandR enabled
247:(==) RandR enabled
257:(==) RandR enabled
274:(II) Initializing built-in extension RANDR
i just downloaded and installed opensuse 11.3 64 bit kde on my laptop.
all my hardware seems to be working fine.
i installed the drivers for my nvidia video card, and 3d is working along with kde's desktop effects.
i installed all my favourite firefox extensions including video downloadhelper downloadhelper - media download firefox extension an extension that can download videos from videos and other video sites.
all of my installed firefox extensions seem to be working except video downloadhelper.
when i try to download videos with it nothing happens.
previously i had opensuse 11.2 gnome 64 bit installed on my laptop, and the video downloadhelper extension worked fine.
i think this problem might have something to do with the way opensuse integrates firefox with kde.
I had an extension i started making and had loaded in Chromium. Well i forgot to unload it and deleted the files for it. Well now Chromium crashes on startup saying it can't find the manifest file for it. How can i remove the entry for that in the extension cookies file?
View 9 Replies View RelatedI didn't delete my old extension and recently mounted it so I could retrieve the data. I was wondering if there was any way I could make it the extension to my current native without deleting any of the data? Or if attaching it as an extension was at all possible at this point.
View 9 Replies View RelatedI have an IBM T60 with Intel 3945ABG WNIC:
Module for this WNIC is loaded:
Code:
Code:
If I execute "iwlist wlan0 scanning", I see the cell I'm interested in:
Code:
I'm able to connect to this cell using Gnome "Wireless Networks" manager, but not with iwconfig. At first I tried to connect to this "bq" network while wlan0 was active("ifconfig wlan0 up") using the iwconfig but this didn't change any of the wlan0 parameters.
Then I tried to shutdown wlan0("ifconfig wlan0 down") and executed:
Code:
Now the changes applied and "iwconfig wlan0" gives following:
Code:
Everything seems to be correct, but I'm still "Not-Associated". I have tried with "iwconfig wlan0 essid bq", "iwconfig wlan0 ap 00:24:14:F9:0B:92", "iwconfig wlan0 essid "bq" mode Managed" etc, but whatever I try, it does not connect. I even did "/etc/init.d/gdm stop" in order to be sure, that Gnome "Wireless Networks" is not interfering with "iwconfig", but this gave no results as well. I can associate with this AP using the Gnome "Wireless Networks" just fine, but for some reason I can't connect using iwconfig.
I did hit a issue with volume extension after reinstalling the OS. SLES 11.2-2.6.31.5-0.1
Before the reinstall I had a single fiber volume with 1 logical drive XFS. I did extend the volume with a second fiber storage and the logical drive extension without any issues. After the reinstall OS everything still worked fine. At one point I did have to extend my volume again and also the logical drive in it. The extension went fine, also the logical drive got bigger on the server side.
But the issue is that the share size for the users stayed the same. It has something to do with the xfs files on the server that are getting installed when creating an xfs file system. I can simulate this issue.
i've bought a vps server with 2 ip. I also bought 2 domains "eventlog.it" and I want associate them to my vps How can i do?
View 1 Replies View RelatedI just bought a new mouse, that has 7 buttons! Beyond the normal left and right click, middle button, and buttons to navigate on the internet, I'd like to be able to associate custom functions to the other two buttons. I've tried to use keyboard shortcuts. However, it doesn't recognize the mouse click as a valid key.
View 2 Replies View RelatedWe need to have the wireless associated with the access point prior to the first login.
Have not been able to get it to work yet. WPA-PSK. wireless will not connect until login.
This is necessary for nfs automount and openldap auth to work. Not a home networking environment.
How to troubleshoot effectively.
I want to make vlc the default application for opening avi files.
I tried 'open with a different application', selected vlc and checked the box 'Remember this application for "AVI video" files' (see attached), but the next time I double-click on an avi file it loads in Movie Player.
I've searched the Ubuntu documentation for "file associations" and "default programs" with no success. I'm probably using the wrong search terms, but somewhere, in all the configuration files and tables, there must be a way to assign a particular program to a given file-type.
(If you're wondering why I want to use vlc, it's because, after hours of research and tinkering, I finally got it to respond to my mceusb remote via lirc.)
Ubuntu 9.10 Karmic Koala.
When I double-click any .theme file I get the error message: "Could not display such-and-such.theme. the location is not a folder."
When I right-click any .theme file there is no option to "Open With", and no "Open With" tab in Properties.
When I create a text file and save it with a random name, I can change the filename extension to wav, jpg, png, txt, or theme, and Properties shows that the OS thinks it is that filetype. But all those filetypes except theme give "Open With" options, and allow me to change the extension again to anything. Once a file has been given the theme extension, it is stuck as a theme file.
any way to make a certain file extension (.etxt) open with a certain jar application (enotes.jar) that uses files with that file extension? i tried (for the custom open command on a .etxt file):
Code:
java -jar /home/me/Programs/enotes.jar "%1" %*
which was proposed (for windows) here: [URL]but it doesn't work when adapted to linux...
I've got a server that runs on Ubuntu Server 11.04 amd64.
I've installed Tomcat 6 and Apache 2 servers.
On Tomcat, I installed Liferay portal as a WAR. I can access to my portal with the following address : http://localhost:8080/lportal
I would like to associate a domain name to the "/lportal" context so that I could access my webapp with the "http://my.domain.com" URL. To make it short, I'd like to access the webapp on "http://localhost:8080/lportal" with "http://my.domain.com".
I followed the info from internet trying to associate Firefox and mldonkey after I installed mldonkey,but it did't work, and there is kind of a add-on , but version seems lower for current firefox. the problem bother me most is why this script doesn't work in my system?
$ cat submit
#!/bin/bash
echo dllink $* | nc -q 1 127.0.0.1 4000
[Code].....
I have a Nook ebook reader and would like it to automatically open a certain application when I plug it in.As standard it just opens a nautilus file browser.I cannot find any settings that will let me associate a drive name/uuid with a certain application and google results came up saturated with how to make bootable USB drives.The only solution I actually found was to make a .autorun script in the root of the drive to start my application, but it still requires user interaction and is not ideal since I would like to implement this across several machines with different users/applications.
View 1 Replies View RelatedHave been using Arch for about one year. Everything works great until a few days ago. My wireless card couldn't connect to my router.
kernel: 2.6.32-ARCH
wireless card: Intel 3945ABG
wireless card driver/firmware: iwlwifi-3945-ucode 15.32.2.9-2
[code]....
The wireless card:
Code:
#lspci -vv
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Subsystem: Intel Corporation Device 1010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
[code]....
Since the card works in scanning mode, I assume it's OK. I have other devices in the house that also connect to the same AP. Everyone works except this laptop.
i would like to determine the hard drive partition associated with a directory. ie i have a disk partition as user with mount point Home. this i think contains my Home directory. a downloaded program resides in /usr/bin. now there is a /usr/local/bin with nothing in it. my question is how can i tell what disk partition /usr/bin resides on. if it is on my user defined partition i will not lose the program on a system install i think?
View 5 Replies View Relatedwe have a dual server setup: Windows server 2003 and Ubuntu 10.04 with apache installed with all the goodies. This is all virtualized. What I'm wanting to do, is make the new website we've created run on the Ubuntu machine, which it is, and be accessible outside the office. However, by doing this, we forfeit being able to use remote access or web exchange on Windows server 2003.
How can I create a link from the new website on Apache point to the internal server and it work outside of the office?
I've had a graphical card and I've downloaded the driver (from the official website of NVIDIA) with extension .run. As I forget the command line to install it, I would like to ask about it.
View 3 Replies View Relatedone of these "WiFi works in Gnome, not in KDE" threads, but I have been all over google and hundreds of threads across different sites and can't figure this one out.As mentioned, wireless is peachy in Gnome, unfortunately I like KDE and I'm more productive using it (when I have internet). Wired network works fine in KDE, and my network card
Code:
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1201
[code]....