Networking :: Puppy 5.1.1 Cannot Connect To The Internet?
Oct 7, 2010
I have installed puppy linux to a fujitsu e-6565. In is the only OS of this laptop. All along i was able to connect to the intenetnd browse using mozilla, seamonkey, and opera.But after rebooting, i cannot browse the net anymore although my eth0 and dhcp setup was successful.I search the net for solutions for 2 days. I tried manually inserting the necessaary info for the static IP. As my last resort, i re-installed puppy twice
View 2 Replies
ADVERTISEMENT
Apr 22, 2011
I'm running Puppy Linux from a SD card on a netbook and there wasn't any drivers for the wireless adapter so I went online and found a module for my Broadcom B4312. The module is already installed and when I go to check for available networks I'm able to see my network and a neighbour's network. The problem: I can't connect to my network, which has a WPA2 Passphrase protection. Theoretically this driver won't allow Puppy to link with WPA2 protected networks so I changed the protection to a WEP one and even like this it won't connect.
View 4 Replies
View Related
Feb 1, 2010
On this box I have Two seperate Ubuntu installations. Recently in both I seem to be having the same problem. I initially can connect to the internet as per normal and use any internet application. But after a period of time, sometimes just minutes, sometimes hours, even though the icon says connected, I cant update pages or send emails etc because there is no actual connection. My Physical connection is good I know - My Ubuntu laptop and Windows gamming PC connect fine during this period. So
Does this suggest an intermittent hardware fault or is there some thing in Ubuntu I can check to make sure that it is setup correctly and nothing has been corrupted? I am a lay PC person - I dont really want to be command prompting - Plug & Play and Point & Click is my limit.
View 2 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
Apr 6, 2011
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
View 5 Replies
View Related
Aug 8, 2011
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies
View Related
Jul 11, 2011
i have shifted from windows xp to puppy.having 256 mb ram desktop.i have a problem for finding nokia pc suite for puppy for connecting internet from pc to nokia 5230.
View 2 Replies
View Related
Aug 15, 2010
I had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
View 1 Replies
View Related
Jun 21, 2009
I am new to Linux and I am trying to install puppy on an old IBM thinkpad 600X (10gb hd, 196mb ram) When installing puppy from a cd, it loads up and does the kernel stuff before "Searching for Puppy files in computer disk drives" - this takes about 10 minutes before saying "pup_421.sfs not found. Dropping out to initial ramdisk console" then it goes to "/bin/sh can't access tty; jon control turned off". then it stays like that and doesn't continue.
View 8 Replies
View Related
Jun 14, 2010
I use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
View 3 Replies
View Related
Nov 12, 2009
I've recently set up a local development webserver using Karmic Koala. I downloaded and installed the server version of Kubuntu and have the web server working.
The problem is that for some reason, I'm no longer able to connect to the internet. I can connect to my router, and other machines in my network can VNC into the server.
I'm using an wired connection to the router and have the server set up on an internal IP of 192.168.0.100. I used to be able to connect to the internet, I downloaded and installed a load of packages etc before it stopped working.
The last thing I remember doing before it stopped working was that I installed Samba so I could share files with the other machines on the network (two Macs running Leopard and a WinXP laptop).
I got the share working - I copied a load of files to the server via the share, rebooted, and for some reason now I can't connect to the net (and other machines can't see the Samba share either.) However I can still VNC into the server.
View 1 Replies
View Related
Mar 21, 2011
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies
View Related
Dec 2, 2010
When i boot my computer and open ubuntu version 10.04.1 the internet wireless connection i have connected automatically. Now, for one reason i don't know, the internet did not connect to the internet. The progam display a message to uncheck the checkmark in the File Menu. After doing this, i refresh the system but it still not connect.
View 9 Replies
View Related
Sep 15, 2009
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
View 2 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
Apr 4, 2011
After working tirelessly for that past 2 months to make my ethernet card works on my toshiba laptop, finally the computer recognizes the ethernet card. But the problem now is the network configuration as i can't connect to the internet. i'm able to assign the eth0 an ip address and netmask and make it up running, and when i do ifconfig -a i can see all is fine but yet i'm not connected to the internet. So i checked /etc/sysconfig/network-scripts and found out that ifcfg-eth0 and resolv.conf are not present. Now my question is how can i create them(step by step pls)? and what should be their values? And is that all i need to do to configure the network and have my internet connected?
View 10 Replies
View Related
Oct 28, 2010
I have just installed fedora 13
i want to connect to Internet
i am using broadband connection
how to do it via dsl
View 2 Replies
View Related
May 22, 2009
I'm trying to connect to the ethernet using my ethernet cable but it seems that my Desktop is not able to get and ip address.
I connect the cable to my laptop, using slackware OS too, it can connect and surf the internet. Before i install my Desktop with slackware, i have tried connecting to the internet using windows which shows that the network card is working.
I have tried to use this command as root:
Code:
But the system still does not get the ip address of my network.
I wonder if slackware has install my network card in my system.
My 1st question: How do i check if my network card has been install and configure in the system?
This is the network card in my desktop when i use lspci command:
Code:
My 2nd Question: How can i set up the desktop to connect to my network?
View 14 Replies
View Related
Feb 18, 2009
My proxy server just stopped from connecting to the Internet. I am using webmin squid proxy. All my setting are fine, meaning that l did not change them. My ip address for the Internet is 192.168.0.1 and for my internal LAN 10.0.0.34 and subnet mask is 255.255.255.0. I have check all the settings seems fine and the squid is running on webmin what could be the problem or where should i start my troubleshoot it. Firewall is turn off. It was working this morning. I did not do any configuration.
View 2 Replies
View Related
Nov 3, 2009
I installed fresh copy of fedora 11. I can't activate or deactivate ethernet from system>Administration>Network. Why is this............I can connect to internet directly by enabling network icon on right topmost corner. Even doing so dosen't guarantee connection at times. What could be wrong here ? Also my network icon shows it is disconnected whenever I start my computer. Cant fedora 11 just connect to the internet while it boots ?
View 2 Replies
View Related
Dec 31, 2010
I have installed fedora 14 x86_64 in my pc. i m trying to connect to internet. in wndows i have connected to the internet using following info:
EVOLUTION NETWORK(BROADBAND INTERNET PROVIDER)
username: username
password:...
I am connected to the internet provider via lan. they provide me automatic ip.
Now how can i configure my network connection in fedora 14.
View 2 Replies
View Related
May 19, 2011
I just installed Fedora 14 on my laptop as a Dual Boot with Windows 7.The problem I am having is that I can't get fedora to connect to my wireless internet.I can access it just fine on the windows side.On my Fedora desktop at the top there a little icon with two little computer monitors there is also a little x by them. Here is whats in the computer as far as networking devices:
Realtek RTL8191SE Wireless Lan 802.11N PCI-E NIC
I also have a:
Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
No matter how I configure settings it don't work.If I have to download something on the windows side to fix this please let me know how to get it to the linux partition.
View 4 Replies
View Related
Mar 13, 2010
Not able to connect to internet
View 9 Replies
View Related
Apr 2, 2010
Yesterday I helped my neighbor install Ubuntu 9.10 on his PC. This PC had XP with many bad viruses is the reason for the change. This is not a dual boot setup. Strictly Linux. I know the hardware is fine because DSL communications was working at the time of the install.
I've found a few threads describing problems with the Network Manager and DSL. [URL] I'm in kind of a "chicken and the egg" situation. This Linux PC has no internet connection right now and many of these fixes are downloads via the terminal. However, at my house, I have XP running and online. Can I download these fixes and copy to a flash drive and install on his Linux box?
View 2 Replies
View Related
May 5, 2010
I have a Ubuntu desktop on my LAN that has suddenly stopped accessing the net, this morning it was working nicely. The computer DHCPs an address successfully, and it can access other comps/services on the LAN. Other comp have no trouble accessing the web.I've pinged my gateway, and I get a response, but pinging Google for example gets me a 100% packet loss.I've tried to release and renew the IP using dhclient, I've unplugged and replugged in the cable at both ends (didn't really expect it to work since it can dhcp fine), I've rebooted the switch, the router, and the comp, still I'm getting the same problem. I haven't played with any firewall settings either.
View 1 Replies
View Related
May 24, 2010
I'm just using Ubuntu for the first time, and am trying to get everything working on the Live CD before I install it. The only problem that I'm having right now is getting connected to the Internet. I'm trying to connect to my router, but it keeps asking for the WEP Key. I type it in and it pops up again a minute later. It works on Windows, though. I'm running Ubuntu 10.04 on an old Inspiron 8100 I got from a friend.
View 9 Replies
View Related
Jun 15, 2010
I'm pretty new to Ubuntu, and have run into problem after problem with networking. The current one: I can't ssh out or connect to the internet, and ping gives a "unknown host" or "network is unreachable". But I can ssh into my computer from others on my network. "route -n" gives 2 entries, neither of which is "default", which from my reading it seems like you need, but I don't know how to remedy that. Is this a DHCP problem?
I'm on a university network, so I doubt it's a problem at their end, but I don't think I changed anything when this suddenly stopped working. On a more meta level, is it normal to run into a different network connection problem every few weeks? I'm not touching anything, I swear! Every linux user I know seems to know ping/ifconfig/route/netstat like the back of their hand, and if it's always like this, it's enough to drive a girl back to windows.
View 1 Replies
View Related
Jun 29, 2010
Both ethernet and wireless connections are down, Windows on the same machiene works with both - not hardware problem. Networking is enabled in the applet, but WiFi indicator and ethernet adapter indicator do not flash. Problem appeared after I closed the lid of the laptop at night (set to suspend), but next morning battery was empty indicating that it failed to suspend. I could not find any "hardware manager" inbuilt to turn devices on.
I don't like using Windows, and internet is a necessity.
PS It's Ubuntu 10.4, Gnome on Dell Inspiron 6400 (x86)
View 4 Replies
View Related
Jul 24, 2010
I just installed Ubuntu and it won't connect to the internet. I have an HP Pavilion dv4 laptop. On the top of my keyboard area has my power button, volume and wireless switches (they're all touch sensitive). Anyways, when the wireless is on, the light is blue. Whenever I log on to my Ubuntu account, it just has an orange (meaning off) color, and I can't switch it to on (blue). I'm running Vista 64 bit right now.
View 6 Replies
View Related
Dec 18, 2010
i want to connect to Internet via 3G key. But in our country, the operator who is offering that service mentions that 3G key is not compatible with Linux OS. But, when surfing on net, i found some scripts that makes such a service working with Ubuntu 7.xx. I wonder if there is a solution with Ubuntu 10.10
View 4 Replies
View Related
