In order to connect to the internet when i am at work i have to use a proxy server; the problem is that this proxy also blocks port xxxxx which is used by a internet radio station. Is there any way to be able to listen to that radio station?
View 5 RepliesThe radio station is located here
Click Here:
Then click to listen
But when it comes up there it does not play for some reason.
It was working fine with ubuntu 8.10 no problem at all.
What did I do wrong here ?
I want to stream a radio station that uses .cfm . I've tried a lot of options but without success. Anyone have experience with cfm?
I can stream other stations using vlc media player and even Adobe flash player. But no success with this cfm stream.
I'm having an issue with rhythmbox in Lucid. I can add and play new radio stations fine. However, upon closing rhythmbox and reopening the radio station disappears from the list. Is there a way to get the stations I add to stay?
View 5 Replies View RelatedAnyone know how I can play a .wax radio station on ubuntu. The link I have is:URL...I don't think this is possible based on some research but find it hard to believe and do not understand why.
View 5 Replies View Relatedi want to play a specific radio station (which broadcasted on a specific website) on my website too,
so, what are the softwares that i should use for this situation ?? & how can i get that radio station be brodcasted on a box in my website page ??
i searched google, but i found alls talking about creating my own radio station, but thats isnt what i want, i only need to broadcast specific radio station (thats already exists) on my website
I just noticed Banshee is the new default player in Natty so I decided to move over my music and radio stations.The media import worked for my few mp3s (only have a couple on here) I have but my radio stations did not import. Since I mostly listen to the radio while on the computer (ipod when I am not), I bit the bullet and recreated all my radio stations by hand.
Most worked but a few of my favorites do not.BBC World Service did not work so I launched Rhythmbox since it is still installed and BBC and the other stations played fine.Searching around the net it looks like Banshee had problems with BBC before since it is an .asx type link but that was supposed to be fixed in one of the 1.x releases.I found Vermont Public Radio hosts BBC World in a different format but my other stations are out of luck unless I stick with RB for now.
any one will new how start firefox with command line with link for favorite radio station.I would use fot that firefox (but radio station can't be set as home page!!!)!I will be use URL...or evolution to start firefox, vlc or mplayer.
View 1 Replies View RelatedUsing Rhythmbox to stream your music to multiple potential listeners over the Internet.But mostly, writing down how I did it so I don't have to re-do all the research the next time.StepsInstall icecast2: APT linkEdit /etc/icecast2/icecast.xml to configure your password at least. You need to add a user-specific password for the username that will be running Rhythmbox. For example, if your username is john you need to putQuote:<john-password>ChangeThisPassword</john-password>between the <authentication> </authentication> tags.I also suggest you set the port to 8000.Restart icecast2 using the following command:
Code:
sudo /etc/init.d/icecast2 restart
Download the attached script (shout2send.tar.gz) and extract it to
[code]....
I'm having trouble getting audio from this particular radio station and have tried the gstreamer plugins, totem, VLC, win32codecs amongst others.Using Ubuntu 11.04 and Firefox 5.0
Radio Station: http:[url]....
It works fine on my Windows 7 PC and my Macbook Pro.
I just for the first time tried to play audio files on a CentOS 5.3 machine, but I noticed there is no xmms installed, and xmms doesn't seem to be available via yum either.
So, what is the easiest way of listening to mp3 files in CentOS 5.3 these days? Actually, I just want to be able to play music streams from an internet radio station.
I need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?
acl blocksites url_regex yahoo http_access deny blocksites
I have also tried saving some url & filter content in a file and edited configuration as follows,
acl blocksites url_regex "/etc/squid/squid-block.acl" http_access deny blocksites
The squid-block.acl file contents are, .cricinfo.com mp3
I recently tried to add a radio station in Music Player only to get a message from the site (Classic FM - UK) that "You appear to be using Linux, please get MPlayer1.0rc3)." So I went and downloaded the install zip file and extracted it to the desktop. Now, in Windows it's easy - there is always a file called setup.exe/other standard name and suffix. But no matter how long I look into this folder from MPlayer I just simply don't know where the exec file is and neither do I ever seem to find installing ANY third party linux stuff on Ubuntu straightforward.
if one of you could take a look at this zip from here: [URL] This is now the sixth or seventh occasion on which I've found users of Linux assuming that everyone under the sun understands what their instructions mean for noobs. I do like Ubuntu but there is a certain attitude among long-term users which is not particularly helpful and which I am certain prevents new people from taking it up; namely that the prime misconception remains that it's assumed "open a terminal and sudo to nautilus" etc is going to make any sense to someone who has just stopped using Windows after 20 years.
So far, I love the start up speed, the manoeuvrability, the customisation of Linux. But I don't like the chore involved in simple functions like the above. Hell, I don't even know if MPlayer1.0rc3 is the same as Music Player! Why? Because, as you'll see from the above link, the makers can't be bothered to tell you anything other than to speak in Linux-Speak. I'm having the exact same issues with getting a Wacom tablet to work - ten million pages of Linux-speak and not a single straight-forward instruction. It's all devrules and sudos and hidden files.... It is sorely tempting to just give up and go back to the evil monster that is Microsoft.
I need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?acl blocksites url_regex yahoohttp_access deny blocksitesI have also tried saving some url & filter content in a file and edited configuration as follows,acl blocksites url_regex "/etc/squid/squid-block.acl"http_access deny blocksitesThe squid-block.acl file contents are.cricinfo.commp3
View 2 Replies View RelatedI'm having an issue with ufw and Synergy. I'm trying to run my Xubuntu 10.10 desktop as a server, and my Xubuntu 10.10 laptop as a client. I can do this just fine as long as I either: Have ufw enabled on my client but disabled on my server Have ufw disabled on both my client and my server I have no custom rules added to iptables on my client. On my server, however, I have tried the following rules:
$ ufw allow from 192.168.0.0/24 to any port 24800 $ ufw allow from 192.168.0.0/24
Neither of these configurations works. ufw on my server seems to block my client's requests regardless of having port 24800 fully open from any local connection, or just flat-out fully allowing any incoming local connection. I'm not sure why ufw seems to be ignoring the rules I'm creating, but as it stands right now, the only way I can connect the two is if I have ufw on my server disabled. And I have tried to ping the two machines; each machine can ping the other, even if ufw is running on both.
And I can ping the router, as well, from both machines. Any ideas on where to go from here to troubleshoot? I should probably also add that I am using the same configuration file that I do on vanilla Ubuntu (with updated host names, of course), and I have no problems in Ubuntu. This seems to be specific to ufw and my Xubuntu desktop. I can paste the code for my server's configuration file, if desired.
I am currently having problems with my server. Its being DDOSed. I have a vps with Centos 64bit. The attack I want to block is udp flood. I was trying to do something like this: iptables -I INPUT -p udp --dport 123 -m limit --limit 40/s -j DROP but instead of blocking certain hosts it blocks the whole port and during the attack its unreachable. How to limit packets per host or any other way to protect from udp flood.
View 11 Replies View RelatedI'm looking for detailed "newbie" instructions on how to install "radio station fetcher" for Banshee.The latest install of Ubuntu 10.04 has no radio station list in Banshee.
View 5 Replies View RelatedI want to run a proxy server on port 1080, so I typed
Code:
ssh localhost -D 1080
That way I am able to connect to port 1080 from that server, but I can't connect to port 1080 from another client on the LAN.
What can I do so that other clients can connect to port 1080 on my server?
Here is my network diagram ADSL router----firewall--LAN inside the LAN my squid is running. currently all users are working with out proxy server. I installed the proxy server inside the LAN. now all users can access web browsing ,but no other ports are working , like POP3, smtp, then some other TCP port based applications are not working. My firewall ( juniper) is created and tested the rules to allow the POP3 and smtp and selected poprts which is working , but I redirected through squid proxy server the clients are not able to access. where do I have to create rules?
** in squid proxy( i already did in safe port list stillnot working)
** IP tables?
I install Redhat9 and run proxy(squid) on this server. I test with a PC with IE put it proxy ip address any other web site is working fine but not for radio&TV channel online, i found many radio and TV online web site can not start to play after click the link.Please anybody help to advice what should i check on squid?
View 1 Replies View Relatedi am using squid proxy server to block some websites in my organization.now i was doing one testing that is, when i blocked Google. gmail automatically gets block.is there any method by which i could block google but gmail access is
View 1 Replies View RelatedAmarok v2.3.1 won't play radio streams. How to configure proxy?
Lyrics fetching works and konqueror is also configured properly.
Using Gnome.
My college providers shifted to a different setting.. I'm not sure what needs to be done. On windows, under the connections tab you need to change the proxy settings and put in the IP address and enter the port to 3000. Questions:
1. where lies the linux (ubuntu 10.04) variant to execute the operation.
2. What can be the major obligations of such a change?
I am sure its siimple enough, but I can't get my net to work properly. The connection provided to the internet is through wireless routers.
server: LAMP - debian, apache2, mysql, php5. a bit info on my network: There is a another service here that already uses port 443 already. It made my website time out, hence the move to another port. PLus, i dont want the 2 services sharing the port. What I am trying to do is forward 443 requests to another port where the SSL service is running so I can hide my port number in the URL.
Here is my sites available conf file:
Code:
NameVirtualHost *:80
NameVirtualHost *:443
NameVirtualHost *:####
[code]....
My ISP (Cox) is blocking port 80 and I would like to know if there is a way to open it again. I am to taking about 8080, 8000 or 81 I want to use 80 so I can host my website and every one can access it without the need to put [url]:[PORT] at the URL
View 2 Replies View RelatedI have the default to deny all. The only rule I have in there is:
Code:
To Action From
-- ------ ----
[code]....
So first off, it probably seems this question has been asked thousands of times before. but I did do a search, mostly archived posts that ended up being something other than a true ip blocking of the port. [URL]..
So my port 80 is truly blocked. Ive tried setting up the port forwarding on my router, Ive tried manually allowing all traffic on port 80 through ip tables. Ive even dabbled with setting up something like openDNS to see So far nothing, Im only available on my local network.
There has to be some way to do a redirect though. even something as simple as an htaccess file redirecting [URL].. xxxx (the space is there to avoid my url being interrupted by a smiley
I have Ubuntu Server (x64) installed on my box with Apache2 and Squid. For awahile port 80 (http) was fine, I could update packages and use wget. Then one random day port 80 became blocked for incoming traffic. I couldn't use apt-get and had to change to an ftp mirror to update. Also wget is not working.
View 3 Replies View RelatedI have cloned an embedded system that runs Opensuse 11 x86 using dd. The embedded system uses a simple serial device, by writing to the relevant device file (/dev/ttyS2, usually). Curiously, when I write to the same serial device on the newly cloned system (which, incidentally, has almost identical hardware), thusly:
echo hello > /dev/ttyS2 the command blocks for up to a minute, before finally returning without making the hardware do anything. I can boot into Opensuse's rescue system on the clone and successfully do exactly the same thing, as I can when I boot the original's "identical" operating system. Why might this problem occur? What can I do about it?
I am currently running Debian 6. I would like to know if there is a way and how i would go about blocking a certain IP range from connecting to my server within a certain port range. Say for example.
i want to block ip range 123.123.123.* from connecting to my server on the ports 33000 - 43000. But, i want to allow them to connect on any other port range, and i want to be able to allow connections from my server to the blocked ip range on those same ports. so, blocking incoming only on the above port range.
using iptables.