I can connect to the Internet using the Windows Drivers for my USB iBurst pppoe modem running in a VirtualBox VM running Windows XP on my Ubuntu 10.10 host. I haven't been able to get this working under Linux.
Is there any way I can connect to this from the Linux host.
I am trying to config linux box as router.
I have CentOS 5.5 client and host in VBox. I can't connect them (I am using bridge adapter mode) as I don't have router in between.
I just created DHCPD on host, and followed
[URL]
But that don't seem to work also. Host is 192.168.1.10 and client is 192.168.1.100 but when I ping host from client, it says Destination host unreachable.
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
Virtualbox, is great, except that I have no wireless networking or USB support. Problem one, is USB support. As far as I know there is a personal free use version of Virtualbox that includes USB support, however I can't find this copy to download it. Any ideas where I can find it? Second problem, I have an integrated wireless networking card in my laptop, that Ubuntu recognizes with no problems, but Virtualbox can't even "see" the device. I found a tutorial that addresses this know issues with wireless and Virtualbox, but I don't understand the instructions
[URL]
Quote:
Wireless Networking Setting up a normal bridged network generally doesn't work if you're bridging from a wireless card to VirtualBox. A simple script that utilises the parprouted tool will allow your VM full access to the wireless network. You will require parprouted to do this: sudo apt-get install parproutedNext, using your favorite text editor, create and edit the script, for example:
sudo nano /etc/network/if-up.d/vbox_networkThen, enter the script (replacing $USER with your username (or whoever you intend to run virtualbox as)). Replace wlan0 with the name of your wireless interface. Use an available IP address on your network for tap0 (I have used 192.168.1.100 in this case):
sysctl net.ipv4.ip_forward=1
VBoxTunctl -b -u $USER
ip link set tap0 up
ip addr add 192.168.1.100/24 dev tap0
parprouted wlan0 tap0Finally, make sure the new file is executable by root: sudo chmod 700 /etc/network/if-up.d/vbox_networkNow your networking script is installed, the virtual interface tap0 will be available on boot for VirtualBox. Rather than reboot, let's just run the script now:
sudo /etc/network/if-up.d/vbox_networkThe final thing to do is tell VirtualBox to use the new virtual device tap0. Open VirtualBox, highlight a VM and click settings. Now choose the network option and select Host Interface on the 'attached to' drop down menu.
In the Interface Name text box, enter: tap0 Click ok and start your VM. The VM should now behave as though it was another physical machine on your network!! For more information on the process up to this point, please visit Bridged Networking with VirtualBox on Linux Hosts Using DHCP in the Guest VM It was possible to get DHCP to work on the guest virtual machine. Instructions were taken from here. Because parprouted does not relay multicast, we need to use an additional helper daemon to manage this. I tried dhcp-helper and bcrelay, and had the most success with bcrelay.
Use it as follows:
sudo apt-get install bcrelay
sudo bcrelay -i tap0 -o wlan0At this point, my /etc/network/if-up.d/vbox_network is as follows:
#!/bin/sh
sysctl net.ipv4.ip_forward=1
[code]....
bcrelay -i tap0 -o wlan0 &It seems that I have to start the script by hand after boot. Other than that, host networking now seems to work fine (this issue should be solved by adding the "#!/bin/sh" line just at the beginning of the script.
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I'm using VirtualBox 4 on OpenSuse 11.3.
I've 6 vm with different OS.
My company uses a net in 10.x.x.x. But I can't use IP of that range (only one for the host). I use IP for my vm in the range 192.168.x.x.
I need my vm to communicate each other, to the host and outside. From outside (10.x.x.x), don't need to access 192.x.x.x.
How do I have to configure Virtualbox?
- Tried with host-only. VM can see each other, but not the outside.
- Tried with NAT. Then VM can't see each other.
- Tried with bridge. Then can't see outside.
I have a Squid Proxy Server running on centos in my office. The proxy server is running OK and I have to apply the proxy settings in web browsers to access internet. I have also created different users to access internet. I have also created a VPN server in proxy server. It is also running very fine. People from outside and inside the office can connect to the VPN server. I have also opened all ports on proxy server.
Problem is, if any of my employee try to connect any other VPN server outside my office, it does not get connected. It shows some "ERROR 619". Whenever I try to connect it always show this error after verifying username and password.
I am not getting that where the problem is. Is there firewall problem in proxy server? OR anything else?
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
View 1 Replies View RelatedI've got a problem with getting my VPN connection from my virtual machine working (a XP64 running in VirtualBox). I really need to get it working so that I can nuke my windows partition, and because I would like run linux programs while using my XP VPN connection (as I need to run some XP programs at school). I've found this manual on how to do it on Ubuntu, but I am doubt about how to translate it to Fedora (and I really prefer Fedora). [URL]
View 6 Replies View RelatedI've installed fedora 15 on virtualbox as my guest OS.I've configured bridged networking and I've set my router to assign an IP to it.when it boots up,I have 2 devices shown via "ifconfig" which is "lo" and "p2p1" and none has the ip assigned to it.I'm unable to access the Internet. How can I configure it to do so?I've tried following this tutorial: [URL] but the file "ifcfg-ethX" doesn't exist...it only has ifcfg-lo..... I've installed fedora 15 spin edition which doesn't have a GUI for me to edit network settings...
View 13 Replies View RelatedI recently purchased a block of 5 IPs from Comcast. I have a computer running Arch Linux connected to the Comcast gateway they gave me. On my connected computer I have 2 Windows XP virtual machines running. Now I was wondering how can I make each of those virtual machines have a different public IP, because currently the only thing I can get working is have the computer and both virtual machines sharing the same public IP.
View 3 Replies View RelatedI am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
[code]....
And the showmount -e on the host gives :
Export list for cudak:
/nfs 10.0.2.15
Forgive me if this has been answered, but searches have been un-fruitful. I recently built a 64 bit Ubuntu 10.10 pc. It is sitting right next to my Windows 7 Premium 64 bit machine. They can't see each other. I disabled Homegroup on my network. Now, when I try to access Ubuntu from Windows, I am prompted for a username and password. Both systems have the SAME UW and PW. It doesn't connect.When I go from Ubuntu to connect to Windows, I am prompted or Workgroup passwords.
View 6 Replies View RelatedI was wondering if it is possible to SSH into my home PC and enable the VPN I have already set up there? After loads of Googling I have been unable to find the command!
View 2 Replies View Relatedconnecting to various servers on my network via SSH. All IP's on my network are static IP's that I've set.
DHCP is at: 192.168.1.1
Subnet: 255.255.255.0
Source IP that I'm trying to SSH from is 192.168.1.2 (My MacMini) I have 2 servers that I SSH into both running CentOS. One I have no problem with: 192.168.1.102 But the other I can't seem to get to: 192.168.1.103 The strange thing is I can only get to it once I ssh into my .102 server. Then ssh from there to my .103 server.
It started breaking down about a few days ago when I installed my VPN server. Could this be causing the problem?? I can access the VPN interface both internally (with a local ip) and externally (outside from the Internet). But why can't I ssh to it from my local network? I've set the subnet for the VPN to be the same as my network.
How to configure Red Hat IP. Here's what I'm trying to do use linux as a web server and at the same time connect the linux machine to local area network. So I need to configure one static ip such as 203......... and then 192.........
View 9 Replies View RelatedI would like to connect a PC (it has no white IP) through Internet. It's possible to create tunnel with SSH, but I need more easy way. May be there is some service exists (like TeamViewer), so people can just run simple command on that PC?
View 3 Replies View RelatedAm not able to browse on Linux 5.please provide me step by step procedure to config internet on my Linux 5
View 3 Replies View RelatedI am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora.
I would like to mount a folder of the host machine on my VM, but never succeeded.
The result of the command is:
And the showmount -e on the host gives:
I am having problems connecting to my VNC server. The host machine is running fedora core 15.
In the past I have been able to connect to the machine, but for some I no longer can't.
I have done the following but still am unsure what problem is
1. Verfied the VNC server is running
2. Verified my user "trb" is in the vnc users list
3. I have checked that my port is open (at least i think). i launched a terminal and did "telnet 127.0.0.1 5902" and successfully connected.
My vncservers config file which is located in /etc/sysconfig/vncservers
Code:
Here is the log file from my latest connection attempt.
Code:
VirtualBox-3.2.8 (the non-free version) seems to be able to tell my wlan0 connection to 'split' into 2 IP addresses: one for the OS inside VirtualBox and one for the host. My router runs Tomato and I can see both real and virtual machines with different IP addresses in the device list (I can also visit httpd running on my host machine from inside the virtual machine). Is it possible to replicate this outside of VirtualBox?
In my case, I would like to be able to 'split' wlan0 into 2 with one IP address for normal network use and the other 'assigned' to eth0. eth0 is "shared to other computers" from NetworkManager and is currently connected to a Belkin router. My goal is to have this Belkin router assigned an address that all machines in my Tomato network can access (I have an OpenBSD 4.7 home server connected to the Belkin).
Whilst VirtualBox was running I tried to see if bridge-utils was being used:
Code:
[root@1 ~]# brctl show
bridge namebridge idSTP enabledinterfaces
...but it appears as though it isn't.
I have Fedora 14 installed in VirtualBox, running in MS Server 2008.There is Oracle 10g software installed in Fedora 14.How can I configure connection to Fedora 14 from MS Server?Anything I've done is useless.I need to open port 1521.I can ping Fedora from MS Server. I can make connection "telnet localhost 1521" succesfuly in Fedora. But that's all.
View 1 Replies View RelatedI've installed Debian inside Virtualbox on Mac OS 10.5.
I want to set up networking so I can (a) reach the outside internet from inside Debian (Virtualbox), and (b) reach the virtual Debian from my Mac. (I don't need to be able to reach the virtual Debian from anywhere but the Mac.)
I can't seem to figure it out. If I set the Virtualbox networking to "NAT", I can reach the outside world from Debian, but I can't reach Debian from Mac OS. If I set the Virtualbox to "Host Link Adapter", I can reach Debian from Mac OS, but I can't reach the internet from Debian.
I'm sure I've set up the way I want before, and I don't remember doing anything special for that, so I must be missing something simple today.
needing to open a port in ubuntu, then use it for my VirtualBox Pc.My VirtualBox is running - Windows XP I have a router connected to my network - Linksys WRT54G Now lets begin, I have tried opening via there router homepage. But when I go to [URL] and test port 4900 is still says that it is closed.
View 3 Replies View RelatedUbuntu 10.04 with Windows OS as Virtualbox, using Samba I connected to another computer which shows up mounted as:
Code:
smb://scott/premier9/
Now in Virtualbox Shared folders it doesn't show up so I can't share it?
Screen shots below...
How can I See it in Virtualbox?
run a Hamachi client in a Windows virtualbox and be able to set it up (using network bridging, maybe?) like Hamachi was running in the host itself.
I'm most definitely not a networking expert, but I thought it would be worth a try to see if anyone had any ideas. Hamachi for linux is outdated and unstable.
Also, if this isn't possible and anyone has another cross-platform zero-config VPN solution as stable as Hamachi
I have an issue my host os is ubuntu 10.10 and i've installed bt4 in virtualbox and i am not able to access internet from my guest os. NAT and Bridged dint work
View 3 Replies View RelatedI have been pouring over pages from some days over this one and come to my end.I have Meekat Guest, Xp host on Virtualbox; set up for folder share on virtual networking.Xp can see Linux shared folder, can withdraw to itself, yet cannot deposit to shared folder; error received "Disk write protected or in use"Linux access to 'workgroup' - xp machine is seen yet when clicked on returns the error of"Unable to mount location - failed to obtain share list from server"smb call from Host returns "Connection to STENCILCUP failed (Error NT_STATUS_UNSUCCESSFUL"
View 9 Replies View RelatedAs of yesterday I have this perculiar problem. When I try to ssh into my account I have on a linux server where I keep some of my files (I'm using Cisco VPN) ssh claims it can't find the address.It's worked fine before, and if I connect using putty in Virtualbox on the same machine it works.The problem applies both to command line ssh and NetBeans (which uses a java client).I've tried setting SSH not to resolve DNS in the config file but it doesn't help.
View 3 Replies View Related