I explain my problem:
- Server with Slackware 10.1.0 no have tcp connection to the port 2049. And I need that this server have tcp connections.
- The rpcinfo out is.
- The kernel version for this server is linux-2.4.29.
- The file /etc/rpc contain is:
- And the file /etc/service contain about nfs is:
I'm not sure if this is a Linux standard, but I've always understood that Linux restricts usage of ports below 1025 to root-user only. My question is why was this method developed?My theory is that it's to reduce the possibilty users who may not be as knowledgable with Linux from getting hacked. This is probably wrong though as ports 1025-66535 are available to any program as any user.
View 1 Replies View RelatedIs it fair to say that connLimit and hashlimit are very similiar on Linux i.e. while hashlimit caters to limits for groups of ports, they both set the connection rate limit per host? How in IPTables, do I configure a policy that limits connections on a port that encapsulates the total sum of all connections from all hosts? i.e. I do not want to allow more than 6000conn/minute for port range that is the sum of all connecting hosts?
View 3 Replies View RelatedOur DBA has an application running on Server2 which needs to connect to Server1 (Linux OEL5.5 server) thru port# 9171. I use telnet to test basic connectivity.What should I do on Server1 in order to open up port#9171 for connection.
View 4 Replies View Relatedi want if a port (exp. 1001) have 20 connections that the next new connection forword to an other port (exp. 1002).
View 2 Replies View RelatedA deamon say ssh will be listening on port 22. when a new connection is requested by the client, it will be authenticated and a new connection gets establihed with some port say 1025. And ssh will continue to listen on 22 for new connections.If I am correct then in my machine I observed following connections are establised to ssh port 22, As per my understanding connection should be established on a different port other than 22.
View 3 Replies View RelatedI'm trying to setup VNC on our debian server so the boss can remotely do admin stuff from anywhere in the world. the first step is getting it working from anywhere in the room, though. And I can't even seem to get that far.
So far I have a VNC server setup, although not without problems. I downloaded and installed vnc from the vnc site, that wouldn't work because trying to start a vnc server gave this error: "error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory"
There are lots of results on google for this error, and the solution everywhere seems to be the same. to install the package: libstdc++2.10-glibc2.2
However, trying to install this package in debian fails. both using apt-get and trying to manually download it from packages.debian.org it just doesn't seem to exist.
I've tried tightvnc from the official repositories and it gives the same error, too.
The way I got around that eventually, thanks to another tutorial, was to install the package vnc4server. then run vnc4passwd to create a password. and after that vncserver works fine, or seems to. Creates display 1.
Now, when I'm trying to connect to hostname:1 from another computer in the LAN. It gives error 10061, connection refused. I installed the debian and I don't recall setting it up to refuse connections on port 1. Is there anything I should check or change to allow the connection, or any log file in debian to check and see what's going wrong?
I'm also trying connecting internally via client on the debian machine, but I can't runvncviewer. I get the same missing shared library error as before. I guess I just worked around, not solved it.
I also can't access it with the java viewer. Trying to connect on port 5801 either from the server itself, or from another one on the lan, tells me it's refusing the connection.
To be clear, I'm certain that the vnc server is started. We have working DNS, and trying to connect directly to the internal IP:1 doesn't work either.
I'm trying to get VNC working but I'm getting this error message:
Quote:
ssh: connect to host my_ip_address port 22: Connection refused
When typing:
Quote:
ssh -f -L 5900:localhost:5900 user@my_ip_address x11vnc -safer -localhost -nopw -once -display :0 && sleep 5 && vncviewer localhost:0
I'm trying to follow the instructions here: [URL] but I'm struggling with point 2 & 3:
Quote:
2. If you have previously reconfigured the firewall on your PC, make sure the firewall allows incoming connections on port 22 from anywhere, and on port 5900 from localhost (also known as 127.0.0.1)
3. If your PC is behind a home router, or any other device that uses NAT, configure your router to send connection attempts on port 22 (but not port 5900) to your PC
So my questions are:
1. I installed a fresh version of Ubuntu 11.4, should I be concerned about step 2? If so, how can I allow incoming connections on port 22 from anywhere, and on port 5900 from localhost?
2. Regarding step 3, I'm using NETGEAR model DGN1000 router. Is that something that I should do from the router's setting page or it's some commands that I should pass through SSH?
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
I'm running suse 11.1 which is configured as a router. Configured are two DSL connections with static IP's and one LAN connection (3 NIC's all together).
Problem: suse firewall will only port forward connections from one of the DSL connections and not the other.
Because I'm running two DSL connections is there something special I have to turn on/enable on the firewall?
How to number of connections for a single ip on port 80 to CentOS 5.5 with iptables? connlimit did not work on CentOS and nginx does not provide a module for that
View 4 Replies View Relatedhave a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedWhen I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
I'm trying to use iptables in order to forward all the incoming packets for port 5555 to port 5556 on the same server (192.168.2.101).
I wrote the following commands:
iptables -A PREROUTING -t nat -i any -p tcp --dport 5555 -j DNAT --to 192.168.2.101:5556
iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.2.101 --dport 5556 -j ACCEPT
I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
Here i my iptables script:
#flush table
iptables -F
#input regler
[code]....
I make an application on GNU/Linux which listening on a MULTICAST stream, so I open my unconnected socket, bind it on a MULTICAST address and a port, join the multicast group with the "setsockopt (IP_ADD_MEMBERSHIP)", then I receive datagram on my socket.
Now I've two different instances of the same application that run with their own MULTICAST address and port. And what I found strange is that, after a misconfiguration, I switch the ports, for example:
Emitting on 225.0.0.1/23451 and 225.0.0.2/23452
Receiving on 225.0.0.1/23452 and 225.0.0.2/23451
And my receiving part doesn't care about the MULTICAST address, it looks like the socket is listening on the port number only! I mean that the receiver [225.0.0.1/23452] take its datagrams from emitter [225.0.0.2/23452] and vice-versa!
I want to set my ip as static and port forward it through a specific port can anyone help me with this im using ubuntu 10 with 64 bit OS
View 1 Replies View RelatedHow can i redirect data received on a port to another port located in a different machine? Can i do this using IPTABLES ?
View 4 Replies View RelatedI have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies View RelatedI had to add them to my firewall script when I installed openvpn on my dd-wrt router:
iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
what should I add/change to set up port forwarding of port 1000 to ip 192.168.1.200. also how to get the answer sent by 192.168.1.200 follow the same route used by the data received through port forwarding.
i have an embbeded hardware that uses bootp for booting from a Network Managemnt Host (NMH)on the same ethernet. The embedded hardware has both kind of ports i.e ethernet as well as E1/T1. I would like ask, what do i require to establish a communication-link between the embedded hardware and the NMH throuh E1/T1 ports of embedded hardware, so as to make it boot through from E1/T1. Further, NMH possesses only ethernet port. Just to refine my questions i'd like to know what additions do i need to do on my NMH , like may be i have to put an E1/T1 port or is it possible that the E1/T1 port can be directly connected to an ethernet port on the other host.
pardon me if i am not making absolute sense here as my knowledge is limited on Layer 1 and layer 2.
how to access networking port and run scripts on that port so as to gain access of remote machine.is that possible through command prompt or through software.
i kno ip address of my frnd who is chattin with me .okay.i want to run an application on his computer .i came to kno tht we can run script o through port
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedNeither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
I am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View RelatedI have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
I'm a bit confused about how ssh encrypts connections. I've read a few articles on ssh and they talk about 'keys pairs' (that is public and private keys) on the server and client computers. However, ssh doesn't seem to use these keys for encryption. What are the keys it uses? This question occurred to me when I was trying to make a remote login to an Ubuntu machine. From a remote login perspective, I haven't generated keys on my client machine and haven't enabled key based logins in ssh. (I use the default password based login). If there aren't any keys on my client, then how does encryption work?
View 9 Replies View RelatedI just installed Fedora 14 in a hard disk of my PC. I installed MySQL also. I dontt know if this is the correct site for my question, but nobody MySQL related, have an answer yet. For MySQL accepting remote connections, my.cnf file must be edited (bind-address line or skip-networking line in that file). Well, that file in my Fedora-MySQL installation does not have such lines, so i assume, TCP/IP connections are allowed in MySQL. When i try to connect to the MySQL server it refuses the connection with the error 2003, that in short, means no TCP/IP connections are allowed. I disabled the firewall and retried but with no success, enabled the firewall again, and nothing happen. Is Fedora not accepting TCP/IP connections?
View 5 Replies View RelatedIs there a way to restrict access for some users to connections from local network through SSH, and have other users that's permitted to log on from connections over the Internet?
E.g. John's laptop only have permissions to access the server on the local network, while Lucy can access the server both on the local network and from the Internet. (Through SSH in both cases)
