Networking :: How To Tag Server Binding Interface
Dec 21, 2009My query is how to tag Linux server bonding interface what mode I use for bonding in prospective of interface tagging.
View 2 Replies
ADVERTISEMENT
Networking :: Bonding / Binding Multiple Interface Into 1
May 27, 2010I have 4 DSL modems connected with 4 different ISP's my scenario is
a) My FC-2 machine with LAN IP=192.168.10.1 and Bond0 IP=192.168.1.1
b) Modem-A LAN IP= 192.168.1.2 , ext IP=xxx.xxx.xxx.xxx
c) Modem-B LAN IP=192.168.1.3, ext IP=xxx.xxx.xxx.xxx
d) Modem-C LAN IP=192.168.1.4, ext IP=xxx.xxx.xxx.xxx
e) Modem-D LAN IP=192.168.1.5, ext IP=xxx.xxx.xxx.xxx
Modem-A, B, C, and D LAN connected with my FC-2 machine, and all 4 interfaces of my machine are in Bond0, Now please help me what default Gateway I should set in my FC-2 machine?>??? or I have to set 4 gateways in my machine?and will this configuration works?
General :: Binding Interface Per Core?
Jul 20, 2011I just wonder, is it possible (using Linux 2.6) to limit overhead done by ethernet interface to one specific core. Ie. I have core2duo CPU, and two ethernet interfaces: eth0 and eth1. Is it possible to move system load caused by packets comming on eth0 to CPU0, so the other core (CPU1) will be idle?
View 1 Replies View RelatedNetworking :: Binding 2 Internet Connections On Same Fedora Server
Apr 11, 2009Can I bind 2 interent connections or more on same fedora server to create bigger one with double bandwidth ,or it needs a specific router to be able to do this.
View 1 Replies View RelatedUbuntu :: NIS And Binding To YP Server
Jul 14, 2009Each time my machine reboots, it takes about 2 minutes for an attempt of the YP server to bind (then it fails).
Code:
jim@LinuxBox:~$ /etc/init.d/nis restart
start-stop-daemon: warning: failed to kill 2469: Operation not permitted
* Starting NIS services
* binding to YP server...
* ....
--> repeats 10 times <--
* .... [fail] [ OK ]
jim@LinuxBox:~$
The previous is a YP server command while running. What happens at boot time is similar. I think I need NIS for my work. This looks like an old common problem (maybe on AMD64 - Ubuntu; which I have). The following link has a good description of NIS and this particular problem. It is a complex problem that I am spending some time working on. It looks like my problem may be that an NIS master has not been created. [URL]. I am trying to share files and run remote desktop with XP machines on a local network. The lack of NIS server may be contributing to my difficulties.
General :: Making X Server Not Binding 0.0.0.0 Or Listening
Sep 2, 2010I'm trying to execute X server (automatically), which will not bind to 0.0.0.0 (port 6000) - meaning X server will not listen on generic interface. If it's possible, I'd prefer X server not to listen at all (and communicate through other IPC if needed), is there a way to make it not listening at all? -nolisten flag or something like that? (and do it automatically, every reboot). Also, Is there a way to make X server bind to 127.0.0.1(localhost) instead of 0.0.0.0(generic interface)? It should be in one of the configuration files or the start-up command to run X.
View 1 Replies View RelatedRed Hat :: DHCP Server Reporting Bogus Mac ID While Binding
Jun 18, 2009I am using using Red Hat Enterprise Linux ES release 3 (Taroon)
dhcp server ver: dhcp-3.0pl2-6.14
I am trying to bind macid 00-21-6B-A1-C9-4C & 00-15-00-1D-AD-57; but it give, when I start dhcp service, I get the following error messages. I am sure macid are absolutely correct. Following the error message I get.
Starting dhcpd: Internet Software Consortium DHCP Server V3.0pl2
Copyright 1995-2003 Internet Software Consortium. All rights reserved.
For info, please visit [URL]
/etc/dhcpd.conf line 2196: Bogus number: 00-21-6B-A1-C9-4C.
hardware ethernet 00-21-6B-A1-C9-4C;
Configuration file errors encountered -- exiting
Server :: How To Adjust EMacs Key Binding To Accommodate Screen
Jan 28, 2010I've recently started using the "screen" multiplexer and it is really handy for some cluster work I've been doing. But if I am in emacs and I press C-A to go to the beginning of the line and the C-N to go to the next line, I get shunted to the next "screen" window. I imagine there are other conflicts as well. I did some googling, but all the suggestions showed how to adjust emacs key-binding to accommodate screen. But I don't want to adjust emacs key-bindings because that is the whole reason I like emacs. I think custom "screen" key-bindings go in .screenrc. Does any emacs fans out there who have run into this problem have any .screenrc code they would be willing to share with me that worked well for them?
View 1 Replies View RelatedUbuntu Networking :: Binding SSH (client) To A Certain NIC?
Nov 23, 2010I connect to my corporate LAN(dhcp) using a wired connection and also connect to a WLAN(dhcp) without various constraints applied by the wired connection. In short my wired connection blocks outbound ssh traffic to my server at home. My WLAN connection is pretty lax so ssh connections to my home webserver can be made using the wireless connection.Can I route ssh to that particular ip via my wireless connection?
View 1 Replies View RelatedGeneral :: Wireless Networking - Binding Wlan0 To Eth0?
Jul 7, 2010When I type ifconfig,
I see wlan0 and eth0. I want to somehow bind these two together into one device.
How would I go about doing this?
Networking :: Vhost With Reverse DNS On ADSL2 Connection Not Binding
Mar 22, 2010I'm working on an ADSL2 connection that connects via PPPoE and it is assigned a static IP. On top of the static, the ISP has assigned a small block of 6 useable IP addresses.
- The primary static IP is on the interface ppp0
- The other 6 IPs are configured as eth0:1, eth0:2, eth0:3 etc.
With the above setup all IPs are reachable and useable on the internet.
- The revers DNS has been updated for a few of these and resolves with no problems. ie: eth0:1 has the 123.123.123.123 IP and resolves to blah.host.com and blah.host.com resolves to the IP address.
- To test this I have tried a program like BNC to bind to the IP address on eth0:1 but for some reason when connecting externally the host address is coming up with the FQDN on ppp0 interface IP, not the vhost IP.
Questions is, is this the normal behaviour since its a PPPoE connection and would only work if the ISP supported a bridged connection? something on the ISP end not allowing this to work?
Ubuntu Networking :: 10.10 Server - Wireless Interface Not Working
Feb 18, 2011Just installed Ubuntu 10.10 server and all working great except the wireless interface. The card is an edimax EW-7711ln. I installed ndiswrapper using the driver rt2860.zip found here [URL]. Then I followed this guide to configure /etc/network/interfaces [URL]. I think the driver is loading fine but I can't connect to the access point. Here is some debugging output...
Code:
peter@Peter-Server~$: route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
Code:
peter@Peter-Server~$: iwconfig .....
So I can scan and see the accesspoint with ssid alleycat but I can't connect. I tried disabling all security to see if it was a problem with my key or some encryption settings but even that didn't work. So frustrating because it seems close to working I must be doing something silly. Incase anyone is wondering why I am running a server off a wireless interface, its just a LAMP development server on my home network.
Networking :: Iptables Rules - Wireless Interface Got Ip From Another Server ?
Jun 18, 2010The following is my setup. wireless server (ip of this server is 192.168.1.1) -- target board ( wireless client [ip of this is got for wireless server is 192.168.1.3 ] , bridge (192.168.36.1) )-- linux pc ( 192.168.36.3) as show above i have target board for that i have a wireless interface and a linux pc is connected to target board.now the ips are like this for linux pc 192.168.36.3 and my target board bridge ip s 192.168.36.1
my wireless interface got ip from another server like 192.168.1.3 ,now if i do ping on my target board for 192.168.1.1 it goes through wireless interface to the 192.168.1.1 wireless server.but when i do the same from target board connected linux pc its not pinging from linux pc i could able to ping to 192.168.1.3 but not 192.168.1.1 .I think i need to write a iptable rule properly on my target board to forward the 192.168.1.* packtes to wireless interface.
Networking :: Will Bringing Down Loopback Interface Make Whole Server To Go Down?
Dec 14, 2010I have a client's linux server where someone added a script which sends spam mails from the server's local loopback address (127.0.0.1) all my seniors worked on it and couldn't trace the script on the server this issue was going for a week, now I have an idea to bring down the loopback interface of that particular server(ya, that was not a permanent solution but just had an idea), but my support manager told that it will bring the whole server down(so far as i have learn't loopback address is used only for testing the NIC card's functionality), is that really bring the server down.?. How ever i tried this using a test machine all the connections works fine even after i bring down the loopback interface. As my client's server is a production server i can't test it there without clear knowledge, can any one help me out whether will it bring down the server or will it cause any side effects on it(i know that you guys are experts so i am asking it here)?
View 5 Replies View RelatedCentOS 5 Networking :: Binding Domain Names To A Folder Below The Web Root?
Sep 1, 2010I have a centOS 5 server running apache 2 with it's web root at /var/www/html. By setting up a dns entry to point to the computer's IP, I was able to go to testing.myservername.com and reach the contents of that directory.My question is, how can I go about mapping multiple future domain names to folders that are under this webroot?For example how would i bind www.temporarydomain.com to the /var/www/html/temporarydomain/ folder and also be able to map www.anotherdomain.com to /var/www/html/anotherdomain/?
View 1 Replies View RelatedNetworking :: ATT Uverse DHCP Not Assigning To Red Interface Interface On Smoothwall?
Feb 14, 2010I just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies View RelatedNetworking :: Prevent Auto Up An Interface At /etc/network/interface File ?
Jul 18, 2011I have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
Fedora Networking :: Setup DHCP Server Via Virtual Interface?
Mar 10, 2009is it possible to setup a DHCP server using the loopback or a virtual interface? I installed Sun VirtualBox on my fedora system and want to try and kickstart them from within the same box on a virtual network. Is this possible and has anyone done it? I only have a single NIC in the box and it is on my public network.
View 1 Replies View RelatedUbuntu Networking :: Setting Up The Wireless Interface On Server (command-line Only No GUI) / WPA
Aug 14, 2010I've been having issues setting up the wireless interface on my Ubuntu server (command-line only, no GUI) and I can't seem to get it working. It seems as though the card is recognized, the drivers are installed and the interface is up, but it fails to connect. I have no idea where I'm going wrong. I have WPA and a MAC filtering setup on my wireless router. An exception has been made for this PC's MAC address and I've manually entered the connection details into /etc/network/interfaces.
[Code]...
Server :: Binding Of IP Address To Its Mac Address In Squid Proxy?
Jun 3, 2009I want to know how to bind Ip addresses to its mac addresses in Squid Proxy
View 5 Replies View RelatedServer :: Error - NFS Share On A Debian Lenny Server With To Network Interface
Mar 16, 2010I am running a NFS share on a Debian Lenny server with to network interface.
Sometimes when booting the server the following messages i shown in syslog:
Code:
If the system is rebooted then NFS is functional again. I would like to know way this happens somtimes so i can repair it, anyone with an idea? Another thing is that i would like to bind the NFS service to a specific interface e.g eth1 is this possible?
CentOS 5 Server :: Server Hangs Whenever Restart Ethernet Interface?
Sep 6, 2011I've started facing the weirdest problem. I have to restart the ethernet interface a couple of times a day and everytime i do that the server locks up completely and i have to hard reboot it.info: recently shifted to a new server, all new components and new installation, OS version CentOS 5.6
View 1 Replies View RelatedGeneral :: E16 Key Binding ?
Dec 1, 2010I need to know how to set my Windows key + Key global shortcut on e16 1.0.7 stable.
View 2 Replies View RelatedUbuntu :: How Set Key Binding From A Terminal
Jul 18, 2010I'm trying to make a script that adds a systemwide keybinding, but I can't find a way to do it from a terminal.
View 9 Replies View RelatedProgramming :: Qt4 Library Binding With C?
Jun 17, 2010i have a code written in c..for which i was trying to create a gui using Gtk+.but now i want to use qt4 for the same purpose but native language of qt4 is C++. i have to do library binding for my C code to develop a gui using qt4.
View 5 Replies View RelatedServer :: Get The XML RPC Interface On RTorrent?
Feb 19, 2010I've been trying to get the XML RPC interface on rTorrent working for some time now, without success. I'm running Debian 5.0 'Lenny' (stable) i386 on a Intel Atom, and need to let an external application communicate with rTorrent via XML RPC.
I've hand compiled the XML RPC C (1.06) libraries and tried the default packaged version for Lenny, and tried almost all possible combinations of the libtorrent10/libtorrent11 libraries and the rtorrent 0.7.9 through to the latest 0.8.x release. As far as I can see the compilation of both the XML RPC libraries and libtorrent work flawlessly (using no special parameters for the 'configure' scripts). I've compiled rTorrent with the --with-xmlrpc-c syntax, which is also accepted, and it compiles flawlessly.
Code:
system:~# xmlrpc 127.0.0.1:5000 system.listMethods
Error: Curl failed to perform HTTP POST request. curl_easy_perform() says: Empty reply from server (-504)
However, rTorrent (running in a shell) reports
[Code]....
Fedora :: Gnome 3 - How To Change Key Binding
Jun 28, 2011I'm slowly coming to terms with Gnome 3 but one thing I can't get used to is using the "Windows Key".
For me it's a difficult key to use regularly. What I'd rather to is remap the "Switch between overview and desktop" action to alt-space, which I am used to from "Launchy" which I have been using in Windows for some time.
A couple of issues though - this is already mapping to "Activate the window menu". I never use it though. Are there any implications of remaping it?
Secondly, what is the command I need to map the key to, in order to emulate the Gnome 3 "Windows Key" behaviour?
Ubuntu :: Terminator Delete Key Binding?
Jan 31, 2010I've recently started using terminator. When using terminator, the delete key acts like backspace. in the ~/.config/terminator/config file I've tried:
Code:
delete_binding = ascii-del
and
[code]...
Ubuntu :: Allow Win / Mod Keys To Have Dual Binding
Jun 17, 2010I have creates this brainstorm topic in regard with dual nature of MOD key and to allow the mod keys to behave as independent key also.
[URL]
Ubuntu :: Keu-binding Focus To Desktop?
Jun 24, 2010i moved to 10.4 and would like to set a key-binding to the "window key" for "Hide all normal windows and set focus to the desktop". This option was possible in 9.04. No when i go to System > Preferences > Keyboard-Shortcuts and try to change the shortcut to the above function it does not accept the win-key as a shortcut.
View 2 Replies View Related