I just wonder, is it possible (using Linux 2.6) to limit overhead done by ethernet interface to one specific core. Ie. I have core2duo CPU, and two ethernet interfaces: eth0 and eth1. Is it possible to move system load caused by packets comming on eth0 to CPU0, so the other core (CPU1) will be idle?
View 1 Replies
My query is how to tag Linux server bonding interface what mode I use for bonding in prospective of interface tagging.
View 2 Replies View RelatedI have 4 DSL modems connected with 4 different ISP's my scenario is
a) My FC-2 machine with LAN IP=192.168.10.1 and Bond0 IP=192.168.1.1
b) Modem-A LAN IP= 192.168.1.2 , ext IP=xxx.xxx.xxx.xxx
c) Modem-B LAN IP=192.168.1.3, ext IP=xxx.xxx.xxx.xxx
d) Modem-C LAN IP=192.168.1.4, ext IP=xxx.xxx.xxx.xxx
e) Modem-D LAN IP=192.168.1.5, ext IP=xxx.xxx.xxx.xxx
Modem-A, B, C, and D LAN connected with my FC-2 machine, and all 4 interfaces of my machine are in Bond0, Now please help me what default Gateway I should set in my FC-2 machine?>??? or I have to set 4 gateways in my machine?and will this configuration works?
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies View RelatedI've a program that launches new processes, and wait for them to die before it exits. So, for example, my program is a process, and it launches 3 more processes, and when the 3 child processes end, it will exit.
As you see, at end of the example, the program used a total number of 4 processes.
1 - Now, I'm running this program in a CPU with 4 cores. This means that the program used each core for each process?
2 - How can I know which core the program used?
I need to know how to set my Windows key + Key global shortcut on e16 1.0.7 stable.
View 2 Replies View RelatedI have a problem with GNOME and virtual desktops. I use Compiz, and when I use the keys to rotate the cube the cube will spin, but all the programs remain in the panel. It works if I manually press the buttons on the "Workspace Switcher" which I've included on my panel.can I create a key-binding for the Workspace Switcher so I don't have to press on the buttons on the panel?
View 1 Replies View RelatedI'm trying to execute X server (automatically), which will not bind to 0.0.0.0 (port 6000) - meaning X server will not listen on generic interface. If it's possible, I'd prefer X server not to listen at all (and communicate through other IPC if needed), is there a way to make it not listening at all? -nolisten flag or something like that? (and do it automatically, every reboot). Also, Is there a way to make X server bind to 127.0.0.1(localhost) instead of 0.0.0.0(generic interface)? It should be in one of the configuration files or the start-up command to run X.
View 1 Replies View RelatedIs it possible to bind a USB drive formatted in NTFS to a specific folder so when i open that folder i see the contents of the drive?
View 12 Replies View RelatedI was wondering is there any way to add additional, alternative key binding to a particular feature in compiz? I am using Wall plugin and on my ThinkPad it is convenient to switch between horizontal workspaces with media buttons for browser navigation. But there just two of them, so I have to use completely different combinations to switch between workspaces vertically and that would be good if I can also use similar kind of combination to switch horizontally as well in addition to those media buttons. Is there a way maybe to send a message to the compiz to execute particular command?
View 1 Replies View RelatedWhen I type ifconfig,
I see wlan0 and eth0. I want to somehow bind these two together into one device.
How would I go about doing this?
i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
i am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies View RelatedIs there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?
View 2 Replies View RelatedI am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?
View 14 Replies View RelatedI have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
I've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.
I didn't check the duration of the battery but surely it will "eat" my battery in a hurry
Assume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.
View 5 Replies View RelatedI have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
I want to generate core dump files from my program when it crashes. Its a pretty big process and has about 10-11 threads in it.I have followed the documentation to enable core dump by setting ulimit to unlimited etc. I quickly tried "A demo program creating a core dump" from the following webpage, which succeeds in Segfault and dumping a core file in the directory that I configured.However, I tried running my original program and caused it to crash. I did this by making calls to kill(), raise() or the same null pointer access as shown in the webpage above. In each case, my program crashed but did not generate a core dump file. Am I missing something?My program is in C++ and my environment is Redhat 9.0 (kernel 2.4.20)
Going through the "Why do I NOT get a core dump?" section on the same webpage as above, I can see two potential problems. One - there are issues with the suid/sgid (bullet # 6). I am not able to change any settings with suid because my system does not contain either /proc/sys/fs/suid_dumpable or /proc/sys/kernel/suid_dumpableTwo, my program has threads in it and the bullet # 8 is the problem.
We have a small cluster of 20 HP systems, all running CentOS 5.3 in an NFS-root environment. Half are quad-socket, quad-core Xeon E7340 @ 2.40GHz (total 16 cores), the other half are 8-socket, quad-core Opteron 8354 (total 32 cores). All systems have a Mellanox Infiniband adapter ("Mellanox Technologies MT25418 [ConnectX VPI PCIe 2.0 2.5GT/s - IB DDR / 10GigE] (rev a0)")
With kernel 2.6.18-128.1.6.el5, infiniband works fine on all systems.
With the update to kernel 2.6.18-164.11.1.el5 (and both types of node running the same NFS-root image), the 16-core Xeons still work fine. Infiniband no longer works on the 32-core Opterons. Specifically, either the ib0 interface fails to appear, or it does appear but when configured with an IP address, doesn't actually work. In either case, loading the IB kernel modules takes a long time, but I haven't instrumented the load script yet to see which module, if any, is at fault. More errors listed below.
However, if I tweak the BIOS of the 32-core systems to reduce the per-socket core count to 2 (so effectively 8-socket, dual-core, down to a total of 16 available cores), Infiniband starts working again. Putting it back to 32-cores makes it fail. Booting the older kernel makes it work again. In summary: old kernel, IB works on all systems. Newer kernel, IB only works on 16-core systems.
Updating the IB firmware from 2.5.0 to 2.7.0 (latest available) doesn't help. I also did a full 'yum update' to make sure that libmlx4, openibd all other associated packages were up-to-date. Doesn't help either.
Some errors that appear on 32-core nodes:
ib_query_port failed (-16) for mlx4_0
ib_query_port failed (-16) for mlx4_0
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
[Code]....
I'm trying to make a script that adds a systemwide keybinding, but I can't find a way to do it from a terminal.
View 9 Replies View Relatedi have a code written in c..for which i was trying to create a gui using Gtk+.but now i want to use qt4 for the same purpose but native language of qt4 is C++. i have to do library binding for my C code to develop a gui using qt4.
View 5 Replies View RelatedEach time my machine reboots, it takes about 2 minutes for an attempt of the YP server to bind (then it fails).
Code:
jim@LinuxBox:~$ /etc/init.d/nis restart
start-stop-daemon: warning: failed to kill 2469: Operation not permitted
* Starting NIS services
* binding to YP server...
* ....
--> repeats 10 times <--
* .... [fail] [ OK ]
jim@LinuxBox:~$
The previous is a YP server command while running. What happens at boot time is similar. I think I need NIS for my work. This looks like an old common problem (maybe on AMD64 - Ubuntu; which I have). The following link has a good description of NIS and this particular problem. It is a complex problem that I am spending some time working on. It looks like my problem may be that an NIS master has not been created. [URL]. I am trying to share files and run remote desktop with XP machines on a local network. The lack of NIS server may be contributing to my difficulties.
Only Single core active on quad core AMD when acpi is active.with acpi=offuname -aLinux dvip4 2.6.32-30-server #59-Ubuntu SMP Tue Mar 1 22:46:09 UTC 2011 x86_64 GNU/Linux
Code:
cat /proc/cpuinfo
processor : 0
[code]...
i download the rpm package of gcc .
View 10 Replies View RelatedI'm slowly coming to terms with Gnome 3 but one thing I can't get used to is using the "Windows Key".
For me it's a difficult key to use regularly. What I'd rather to is remap the "Switch between overview and desktop" action to alt-space, which I am used to from "Launchy" which I have been using in Windows for some time.
A couple of issues though - this is already mapping to "Activate the window menu". I never use it though. Are there any implications of remaping it?
Secondly, what is the command I need to map the key to, in order to emulate the Gnome 3 "Windows Key" behaviour?
