In windows, when I use an HSPDA modem, internet traffic will be automatically directed through it. Everything will go back to normal once broadband connection is disconnected. In fedora 12 this is not the case, internet traffic will still go through the lan interface. Is there a way to mimic windows behavior in linux?
View 3 Repliesfor the last one week i'm facing problem in sharing internet between xp and fedora. I'm connected to internet through wireless adapter in xp and wants to share internet through crossover cable between xp and fedora. I did the following steps.
1: start a network setup wizard in xp.
2: change the smb.conf file in fedora and change the workgroup name to same as in xp.
3:in Xp the ethernet adapter has address 192.168.0.1/24.
4: when i connect the crossover cable and start fedora. it couldn't get the ip address through dhcp.
5: when i tried giving the ip address manually "192.168.0.2/24 with gateway 192.168.0.1"and save the subnet mask is replaced by 192.168.0.1 don't know why it not saved.
i tried changing new ethernet card but not worked. some time avc denials message "SELinux is preventing consoletype (consoletype_t) "read" to /var/lib/dhclient/dhclient-eth0.leases (dhcpc_state_t)." comes. can any one tell me how to enable or make a network in fedora . i 'm very new in linux and couldn't able to share network .
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I have recently installed Fedora 12 and want to share my internet connection with other pc's at my home including windows pc. My linux machine is connected to internet via DSL connection.
View 6 Replies View RelatedI want to connect my newly created Gentoo DAW to a Fedora 12 PC, for file sharing and Internet purposes. The Fedora PC has 2 NICs, where one of them is connected to the apartment's Router. The Gentoo PC has 1 NIC. I am using a crossover Ethernet cable for connecting them. [UPDATE] I changed to crossover cable, now my two machines are able to ping each other! Here's the IPs:
PC1(Gentoo): 192.168.1.2
PC2(Fedora): 192.168.1.3 --- PC2(Fedora) to Router IP: 192.168.0.10
Router's IP: 192.168.0.1
All I need now is for PC1 to enter the internet... How do I proceed from this point?
How to make internet sharing in Fedora with two inputs & one output.
View 14 Replies View RelatedI have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies View Relateddoes anybody know ho to sharing internet connection in fedora 12.what program should be installed and how to configure it.
View 8 Replies View RelatedI'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View RelatedI recently bought a dell inspiron 14 n4010 and i've installed windows and Ubuntu 10.04 in it. The problem is that i'm not able to access internet in my ubuntu. I'm using asianet broadband connection and i'm able to get internet in my desktop when i connect the cable to the system. But when i did the same with ubuntu 10.04 in my laptop, i'm not able to get internet access. I'm able to access internet in windows though. But i hate using windows.
View 9 Replies View RelatedI am using ubantu 10 and broadband where userid and passwd has been configured in router box. So when I connect this from windows its automatically connected (using ppp0e and dhcp), whereas in linux it could not connect.
View 2 Replies View Relatedis there a possibility to connect to my router admin zone from internet using wan ip? from lan I can do that using 192.168.x.x IP but when Im in work and something go wrong at home how can I check configuration of my router from outer world instead of lan?
View 7 Replies View RelatedI have latest ubuntu and I have made 3 vm's for them.
VM 1: with 2 NIC cards, one is NAT connected directly through my host machine to the internet with ip address 192.168.190.142. Second NIC card is "host only" with ip address 192.168.0.10
VM 2: with 1 NIC card, "host only" and ip address 192.168.0.100
I want VM 2 to connect to the internet but through VM 1. for this I used following configuration in
Code:
/etc/network/interfaces,but it is not working[code]....
I have given my VM 2 the gateway of VM 1 but it is not going through.P.S: both machines are pinging each other properly.
I have latest ubuntu and I have made 3 vm's for them.
VM 1: with 2 NIC cards, one is NAT connected directly through my host machine to the internet with ip address 192.168.190.142. Second NIC card is "host only" with ip address 192.168.0.10
VM 2: with 1 NIC card, "host only" and ip address 192.168.0.100
I want VM 2 to connect to the internet but through VM 1. for this I used following configuration in
Code:
/etc/network/interfaces
but it is not working
Code:
auto lo
iface lo inet loopback
auto eth1
code....
I have given my VM 2 the gateway of VM 1 but it is not going through.
P.S:
both machines are pinging each other properly.
I have little question, how can i share internet in Ubuntu? In this case to Win 7? I have tried Firestarter, but that doesnt work... And please I do not have a router I just need simple connection from my desktop to my laptop, and I dont want another box collecting dust.
View 1 Replies View RelatedI'm trying to use my bluetooth connection on Opensuse 11.4 to share its internet access with my Windows 7 laptop.I've been able to link them together(send receive files) but cannot create an Adhoc network or share internet with the link.What should I try? Could someone point me into the right direction?I looked at one promising tread that looked as if it would work but cant find hcid.conf(did a complete file search and think it may have been changed in bluez).
View 2 Replies View RelatedI have a laptop running Windows XP with a secure wireless internet connection. I want to share this connection to my desktop running Ubuntu 9.10 via an direct ethernet cable connection. So far in Windows I checked the "Allow other network users to connect through this computer's Internet connection" in the Wireless Network Connection Properties menu. Doing this creates a new IP Configuration. Here is an output of running the ipconfig command: Windows IP Configuration
Code:
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : home
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
[code]...
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
I have an Ethernet hub, and want two computers (both notebooks) to share my internet connection. One is running Ubuntu 9.10 and the other is running Windows Vista. I want both computers to be able to connect to the internet (I use a cable modem).
However, when I plug both computers in, I am able to get only one of them working at one time. When Ubuntu works with the internet, Windows does not work (although it sees the internet connection). When Windows works, Ubuntu sees the connection, but cannot connect.
I'm trying to share an internet connection between two computers. The one currently online is a HP Presario running Ubuntu 9.10, and connects through a wireless connection. It has an ethernet port, which I'm hoping to use to connect to a Dell Desktop running Windows XP pro SP 3. I'm hoping to make this happen one of two ways.
1. Without having to mess with any DHCP settings. Sadly, I live with my parents, and the router in their room uses DHCP and sets the addresses for all the computers on the network. My parents don't want me screwing with any of the settings on the router. is there a way to just have Ubuntu pass information from the ethernet connection to the wireless connection without having to deal with DHCP.
2. I'm sure this has been explained, but as I'm new to Ubuntu, I will pretty much need step by step instructions to do this part. Sorry to be difficult. Is there a way to have Ubuntu keep the current settings it has on the wireless side (let the router determine it's address and all of that good stuff), but have a DHCP server kick in on the hard-wired side so Internet Connection Sharing has an address to look for on the laptop?
I want to use the wifi card in my laptop to share my internet connection to my Android Phone.Android phones don't support Ad-hoc networks yet (maybe not ever) so I need to the shared network in Infrastructure mode not ad-hoc mode.Using Ubuntu 10.04, If I click on the NetworkManager Applet ( 0.8 ) and select Create new wireless network, it will create an ad-hoc network, I then tried changing this to infrastructure, but it didn't work.Is there some way of modifying this created network to make it appear as infrastructure, or alternatively create a shared internet connection in infrastructure mode?
View 2 Replies View RelatedJust took the plunge and removed Windows 7 from my desktop rig and I am currently using Ubuntu 10.04
I was using this PC to share my Internet (DSL) connection to any and all other PC's on my network, wired and wireless, and I am attempting to set this up in Ubuntu.
My desktop, other wired PC's, a wireless AP and my DSL modem are all connected to a 8 port Ethernet switch and I was using ICS in Windows 7 to share my Internet connection once I established the connection from my desktop.
Can this be done in Ubuntu? As soon as I make the DSL connection it says that Auto eth0 disconnects (which I set to share to all in IPv4 settings which I read on the forum is the way to share)... thus nothing is currently shared :/
In this document it states that the sharing computer needs two network interfaces... but in Windows I only used the one...
The place I will be staying at (Japanese Guesthouse) only offers internet through cable. What I'd like to do is be able to connect my other devices through wifi (Cellphone for example) to the Ubuntu machine connected through this ethernet cable in order to access the internet.I've searched for a good hour but I'm getting extremely confused about the gateways, bridges or whatever else people suggest. Most of what I've been able to find actually only covers getting internet through wifi and then sharing it through lan (I'm trying to achieve the opposite).
So if anyone could point me in the right direction, or at least tell me what terms I should be using for my searches, it would greatly help.Some computer info might be useful. I'm using a Dell XPS M1210, the network adapter is an Intel Pro Wireless 3945ABG and I'm running Ubuntu Desktop Edition 10.10.
I have a desktop PC and a laptop, both running Ubuntu lucid, the laptop has XFCE and the PC has GNOME, but that's actually not relevant.My PC is connected to.I can't access the internet from my laptop, but whenever I connect the two machines with a network cable, my PC sees the connection at eth0 (even announces connection and disconnection), but my laptop does not.I have no idea what's going on, could this be a faulty cable or a faulty network card at my laptop? Or I simply screwed up the connection setup?
View 9 Replies View Relatedi have 2 laptops which is one installing windows 7 and the other one is ubuntu 10.04. i have internet on windows 7 and want to share to linux ubuntu 10.04 through wireless connection. How to setting that?
View 2 Replies View RelatedSharing big files trough internet with Windows
View 1 Replies View RelatedA friend of mine is trying to setup internet connection sharing in Ubuntu, which is something I've never dealt with before. Here's the situation:One desktop PC is dual-booting Ubuntu and Vista. This box is connected wirelessly to the router and can access the internet just fine. The desired setup is to have an xbox360 connected (wired) to the desktop PC, allowing it to share the internet connection.
1) A crossover cable would need to be used between the desktop PC and the xbox.
2) The xbox would still have the router's internal IP as the default gateway (I have zero experience configuring networking on an xbox... I hope these options are easily available).
3) The internal IPs can all be on the same network (i.e. router = 192.168.1.1 ; desktop = 192.168.1.100 ; xbox = 192.168.1.101)
4) IP forwarding would need to be enabled on the Ubuntu host
Is there anything I'm overlooking or just oversimplifying, or should that just about do it?
My ifconfig of RHEL 5 is
Code:
My windows ip config is ( DNS IS 172.31.1.30)
Code:
Ethernet adapter Local Area Connection:
I want to access internet on windows system through this RHEL system .
I am working one linux server and 5 win xp systems. They connected in lan. In linux server have one builtin lan card and one add-on lan card. Add-on card configured ip which has ISP given.
View 1 Replies View RelatedI have an ubuntu 7.10 ICS server that works fine and I have routed my traffic using firestarter to my windows PC. my server's IP is 192.168.0.1 and my windows client is 192.168.0.2. now, I have bought another PC and I want to assign 192.168.0.3 to it and connect it to ubuntu server. in windows, all I needed to do was to connect the first client to first network card, second one to second network card, bridge two connections in my server, assign 192.168.0.1 to the network bridge in my server and 192.168.0.2 and 192.168.0.3 to my clients, then share my internet connection. I also could access shared files in any computer from all of them. can I have the same functionality with a linux server?
I'll make a list to make it easy if you don't wanna read the whole post:
things I want:
1. assign one ip address to multiple interfaces in linux, making them bonded.
2. sharing the internet connection with both clients.
3. ability to use all shared files over a network.