Networking :: Sharing Big Files Through Internet With Windows?
Jan 18, 2009Sharing big files trough internet with Windows
View 1 RepliesSharing big files trough internet with Windows
View 1 RepliesI have a laptop running Windows XP with a secure wireless internet connection. I want to share this connection to my desktop running Ubuntu 9.10 via an direct ethernet cable connection. So far in Windows I checked the "Allow other network users to connect through this computer's Internet connection" in the Wireless Network Connection Properties menu. Doing this creates a new IP Configuration. Here is an output of running the ipconfig command: Windows IP Configuration
Code:
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : home
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
[code]...
I have an Ethernet hub, and want two computers (both notebooks) to share my internet connection. One is running Ubuntu 9.10 and the other is running Windows Vista. I want both computers to be able to connect to the internet (I use a cable modem).
However, when I plug both computers in, I am able to get only one of them working at one time. When Ubuntu works with the internet, Windows does not work (although it sees the internet connection). When Windows works, Ubuntu sees the connection, but cannot connect.
Just took the plunge and removed Windows 7 from my desktop rig and I am currently using Ubuntu 10.04
I was using this PC to share my Internet (DSL) connection to any and all other PC's on my network, wired and wireless, and I am attempting to set this up in Ubuntu.
My desktop, other wired PC's, a wireless AP and my DSL modem are all connected to a 8 port Ethernet switch and I was using ICS in Windows 7 to share my Internet connection once I established the connection from my desktop.
Can this be done in Ubuntu? As soon as I make the DSL connection it says that Auto eth0 disconnects (which I set to share to all in IPv4 settings which I read on the forum is the way to share)... thus nothing is currently shared :/
In this document it states that the sharing computer needs two network interfaces... but in Windows I only used the one...
i have 2 laptops which is one installing windows 7 and the other one is ubuntu 10.04. i have internet on windows 7 and want to share to linux ubuntu 10.04 through wireless connection. How to setting that?
View 2 Replies View Relatedi have an evdo connection with which i connect to the internet. i have been trying to share this connection for quite a few days from my lucid machine to a windows 7 pc but have failed. i have tried dhcp3-server, firestarter, network manager's built in capabilities but have failed! today i manually configured da windows 7 pc to an ip address within da range which network manager ws assigning when 'shared to other computers' ws selected and it worked! Now da question is how do i do it automatically? dhcp3-server never starts, it always fails with the error 'not configured to listen' or sumthng like it! Plus i want the wireless of my laptop to make an ad hoc connection to my mobile fone, which is also no possible...i think its some problem with da dhcp server.
View 1 Replies View RelatedI'm trying to share the internet connection of my Windows XP Virtual Machine (virtualbox) to Ubuntu. I know it sounds weird, but what happens is that i'm using a 3G modem to connect to the internet and 3G connections are still very unstable with ubuntu's network manager. Fortunately, the modem works a lot better with my Virtual Machine. I have already set up a "host only" network between my Windows XP guest and my Ubuntu host and i can they can ping each other but i still can't share the connection of my virtual machine. I already selected "share this connection" on win xp but i think i still have to configure something on ubuntu for it to work. The interface Ubuntu uses is vboxnet0 (not eth0).
This is the last thing to do before i can get rid of my Windows XP partition
configuring Internet Connection Sharing from my Ubuntu 10.10 machine to a Windows XP machine. I've seen How To's but they didn't work, yet.
The Ubuntu machine connects to the Internet through a DSL USB modem that required packages not provided with the distribution, and specific instructions to configure it; so getting Internet working alone was difficult. As a result, I don't even use Network Manager, rather connect using the command pppoe-start. The machine is connected to the Windows PC through a simple cable, through the Ethernet card.
Some tutorials I've seen on ICS are for machines with two Ethernet cards, or for wireless connections; but I've seen none for a USB modem. However I once found one, years ago, and it worked, but I couldn't find it now. It was using iptables, and I didn't really understand what I was doing, but it worked. But then I had to format the disk, and now I can't find a way to get it working again.
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I have a laptop on which i connect to internet using dialup modem.my laptop is also connected to a linux box via lan.now i want to connect to internet from the linux box, using internet connnection sharing from widows xp installed on laptop
View 8 Replies View Relatedi would like to setup one of my old pcs as a file server and internet gateway; we are living in a large building shared with 40 others. the ubuntu box would be the one connected to the internet via ethernet and sharing connexion via wifi. i haven't started yet - presently, i am doing the ground work and reading before to start i understand sharing the internet is relatively simple and can be done from the GUI
What we would like is slightly like BT Fon or BT Open Zone in the UK: you can hook on a free network but in order to access outside (internet: email, web, ftp, etc) you need to login login would help us monitor fair usage. I imagine something with username and password for each user would do: as we are a few in the same building not everyone is actually paying for the connection and we don't want to end up with rather large excess bills. So the ones who are paying access both files and internet; those who dont just have access to the files on the local server.
Do i need Ubuntu server to set this up? What hardware would be ideal - given we are all far from rich but willing to have a nice setup
It would be great if you could share some knowledge around the topic and eventually provide some tutorial; also any heads-up on the hardware side would be great! (signal booster, etc - there's 3 floors and 3 buildings)
I have pc and a laptop. On the pc i have winXP 32-bit and on the laptop Ubuntu 10.04 64-bit . Can I share files between these two computers (cause i don't want to make dual-boot on my laptop), and if I can, how ?
View 4 Replies View RelatedI have set up a fileserver using ubuntu before, but never on 10.10. i have installed samba set the folder to share, can see the folder on windows 7 but when i try and view it says.
Windows cannot access \FILESERVERBackup
You do not have permission to access \FILESERVERBackup. Contact your network administrator to request this action
Quote:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[code]....
I have 2 laptops, one is a Acer travelmate (running xubuntu) and another one is a Dell studio (Running Windows 7). I also have an iMac..2 external hard drive and a BSNL 3G usb data card. I want to setup a network so i can share my files and internet connection between the 3 systems. I don't know what i want to do is possible or not. what i want to do:
1) connect the usb data card to Acer and share the internet connection using the inbuilt wireless card in the laptop so that the dell and imac can access it.
2) connecting the 2 ext. hard drive to Acer and sharing the files over the same connection( wireless connection used to share internet with other systems) so that i can access the files from my dell and imac. I want to mention that i don't have a router.
if yes..how? and if not why? i'm a newbie..so plz help me..earlier also this forum helped me a lot in learning linux..hope this time also i will have some good experiences.
I just purchased a wireless router, b/c my two computer's wouldn't adhoc, so how do I get them to share files now? 1 is ubuntu and the other is windows xp
View 6 Replies View RelatedI am using ubuntu 10.04 .I tried to share my files on windows network using samba , I changed theworkgroup name in samba configuration file ..but it dint work for me will you please tell me the exact procedure to share the files on windows network ..
View 7 Replies View RelatedI'm having some problems with file and print sharing between my Fedora 12 box and my Win 7 box. trying to access shares on the Win 7 machine results in a "unable to retrieve the shares list" error message. I've been searching Google for a while now with no success.
View 3 Replies View RelatedI followed these steps to try and connect my Desktop(Ubuntu) and Laptop(Win 7) together so they could share files.
Code:
sudo apt-get install samba
sudo su
cp /etc/samba/smb.conf /etc/samba/smb.comf_default
gedit /etc/samba/smb.conf
[code]....
sudo su was not originally in the steps but it wouldn't give me permission to edit the samba file unless I did.Also at the end it said command not found or something like that when I tried to restart samba, so I just logged out and then back in.So now I can identify Ubuntu and Win 7 from on each other, but I can not access either of them. Ubuntu goes into windows network, then workgroup, shows the computers on the network but when I try to access one this comes up:When windows tries to access Ubuntu it request for username and password. I type it in but it does not recognize it.
P.S. I allowed the Documents folder on Ubunto to share across the Network, and while it shows up in along with myshare on Win 7, it still requests for username and password.
I've just recently got my samba confg working with a workgroup. I can view/access/modify windows machines on workgroup just fine. What I can't do is access shares created on ubuntu desktop. My ubuntu machine appears on Windows Workgroup, but denies to Windows users. When I try to create a share using Folder Sharing, I get this returned to me:
'net usershare' returned error 255: net usershare add: cannot convert name "Everyone" to a SID. Invalid parameter.
Here's by samba config file.
[global]
workgroup = JANSSEN HOME
server string = UServer
encrypt passwords = No
map to guest = Bad User
obey pam restrictions = Yes
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:* %n
*passwordsupdatedssuccessfully* .
username map = /etc/samba/smbusers
unix password sync = Yes
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
dns proxy = No
usershare allow guests = Yes
panic action = /usr/share/samba/panic-action %d
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
Im using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedI have a non-profit company. Currently we are using Dropbox to store and share files. We have the free 2 gig account and we are quickly running out of space. Naturally, we don't have a lot of money so I'm looking for a cheap alternative. I thought I might be able to set up a linux server in my home (with a back-up drive) do to the same thing. I want my board members and staff to be able to access these files from their homes or jobs and to be able to manipulate the files on the server. I'd like to be able to control access levels so that I can limit access to certain files and folders. I have a tech background but none of the others do so FTP is not really an option. It needs to be as simple as if they were looking at a file on their pc. Is this possible or am I totally dreaming here?
Right now I'm using Ubuntu but I just downloaded Fedora 15 and plan to play around with that a bit. The pc's I have are P4 2.6 with 1G RAM.
I'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View RelatedCurrently my job is to make websites with Django. I use many things like virtualenv, PIL, etc. The problem is, I can't stand Linux on my desktop. I like it on servers, It's greate to use it over the SSH. But for desktop? No way. But for the development Linux is quite essential. Of course almost everything is ported to Windows, but it's not as simple to use as in Linux. For example, Windows shell is awful in comparison with Linux. So I've tried Cygwin, but it's too damn slow. Every time django dev server reloads, it tooks almost 20-30 seconds. In comparison, then using "native" python on Windows or Linux, it reloads instantly. Even worse, Cygwin makes all my system very slow.
I've been thinking about it and have thought up a way to go. I can share a folder with my application with some Linux box. The devserver and everything will run on that box, while I'll be happy editing files and running the browser on my Windows 7. SSH shell is much quickier and handy than Cygwin. Currently there are no Linux boxes in my home network (except for my android phone :) but I have several VDS boxes with Debian.
So, how do I share a Windows folder with VDS box? I can't rely on my desktop IP but I can rely on the VDS's one. I need sharing to be as quick as possible (well, 2-3 seconds ping is OK) and "native" for both systems, so I could use a folder like a normal folder in both Windows and Linux.
how can iuse internet of linux pc to windows pc
View 7 Replies View RelatedI have a 500gb hdd and a 320gb hdd . i want to dual boot with windows 7 on the 500. I usually make 4 partitions for windows - 1. windows 2. programs 3. games 4. data- and put ubuntu on the 2nd hard drive.
View 3 Replies View RelatedI shared home folders to be accessible from a Windows XP notebook computer which my wife uses some times. One of the folders contains many pictures which I later renamed (bulk rename at the ubuntu box). The pictures at the Windows box still have the old name and they can be opened as usual. However, when my wife rotated a picture and saved it with the same name, the picture just disappeared. For some reason It can not display the new names. I removed the Thumbs.db files, restarted samba and re-configure again the connection with samba but no luck. It is not a big problem but I was wondering if someone knows what this is happening?This is my samba config file:
Code:
[global]
workgroup = WORKGROUP
server string = %h Ubuntu
dns proxy = no
[code]...
I am trying to share files between my Kubuntu and Windows Machines. I have tried reinstalling samba 3 times with different guides and trying non-stop for 3 hours. I now see my Kubuntu folders I want to share but when i click on them it asks for a password. I have tried many passwords but they dont work. Also with the printer on the other Xubuntu machine in the other room, I can access the files on that one but i cannot print from the printer as i can in Kubuntu without a problem.
View 9 Replies View Relatedfor the last one week i'm facing problem in sharing internet between xp and fedora. I'm connected to internet through wireless adapter in xp and wants to share internet through crossover cable between xp and fedora. I did the following steps.
1: start a network setup wizard in xp.
2: change the smb.conf file in fedora and change the workgroup name to same as in xp.
3:in Xp the ethernet adapter has address 192.168.0.1/24.
4: when i connect the crossover cable and start fedora. it couldn't get the ip address through dhcp.
5: when i tried giving the ip address manually "192.168.0.2/24 with gateway 192.168.0.1"and save the subnet mask is replaced by 192.168.0.1 don't know why it not saved.
i tried changing new ethernet card but not worked. some time avc denials message "SELinux is preventing consoletype (consoletype_t) "read" to /var/lib/dhclient/dhclient-eth0.leases (dhcpc_state_t)." comes. can any one tell me how to enable or make a network in fedora . i 'm very new in linux and couldn't able to share network .
I have little question, how can i share internet in Ubuntu? In this case to Win 7? I have tried Firestarter, but that doesnt work... And please I do not have a router I just need simple connection from my desktop to my laptop, and I dont want another box collecting dust.
View 1 Replies View RelatedI'm trying to use my bluetooth connection on Opensuse 11.4 to share its internet access with my Windows 7 laptop.I've been able to link them together(send receive files) but cannot create an Adhoc network or share internet with the link.What should I try? Could someone point me into the right direction?I looked at one promising tread that looked as if it would work but cant find hcid.conf(did a complete file search and think it may have been changed in bluez).
View 2 Replies View Related