Networking :: An Unhandled Exception Has Occurred?
Feb 9, 2010When i try to configure network in Fedora 8 i get this error: "An unhandled exception has occurred. This is most likely a bug"
View 1 RepliesWhen i try to configure network in Fedora 8 i get this error: "An unhandled exception has occurred. This is most likely a bug"
View 1 RepliesI want to dual boot Fedora 11 with Ubuntu 9.04 Jaunty Jackalope.
I already have Ubuntu installed, but when I try to install Fedora 11 from Live CD, it comes up with this error:
An unhandled exception has occurred. This is most likely a bug... blah blah etc. Bug report is attached.
I would really appreciate it if anyone helps me!
I have had Ubuntu for about a month now (Windows blue screen), I want to use Fedora for a new experience and to do certain things I can't do with Ubuntu
I am booting from a USB stick.
I am using a gateway server, 1st NIC eth0 which is acting as WAN (DHCP)and 2nd NIC acting LAN(static). I am using DHCP to assign IP to eth0 from a Wimax modem. I am also use it as a MAIL server (openmail), and as a DHCP server. My server is of RHEL and kernel version is 2.4.8.18-14 and DHCP client & server version - 30pl1-9. The prolem is whenever I run the command..
ifup eth0
getting the error...
Determining IP information for eth0.../ifup: line277: 23328 Floating point exception/sbin/dhclient ${DHCLIENTARGS} ${DEVICE}
so what should I do?? if I update the DHCP, would it be ok?
I have FC-4 with Squid and Dansguardian. Internet Users in my organisation are configured to use proxy with 8080 in browser IE. There's no issue with Users as DG working perfect for them. We have Business Development Team, as they need to do most of the research over internet, their IP's are included into "Exception IP List" in Dansguardian. Obviously these people will be excepted from all banned sites, BD Team able to do chat, play games and do social networking and other stuff over the net, which results in more bandwidth consumption and breaking office policies.
I have tried to implement SQUID ACL's to block few sites like " meebo.com, orkut.com,facebook.com etc" but SQUID acl's not coming into picture. any one who successfully blocked chat, banned sites and social networking in DG with my case.
Gateway m275 with Fedora 12 is unable to read DVD+RW media. Media is recognizable on DVD+RW drive.
What do I need to set to make it readable or is the problem the media type?
I have recently installed ubuntu on a different computer. I have had multiply instances of wine running fine on multiple desktops. I have had some issues before and I ended up reinstalling ubuntu and it worked fine. I do not want to reinstall ubuntu again if it is avoidable. I have not been able to get any windows programs to run successfully with this installation of wine.
Wine version:
wine-1.1.42
Errors in terminal
Application: "Heroes of might and magic III"
jake@jake-ubuntu:~/.wine/dosdevices/c:/Program Files/Heroes of Might and Magic III Complete$ wine Heroes3.exe
wine: Unhandled page fault on read access to 0x00000004 at address 0x7dfd4ef6 (thread 0009), starting debugger.....
I'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
Just upgraded to 11.04 Natty Narwhal, and got myself a Samsung Galaxy S2. Tried connecting via USB in order to sync contacts, photos etc. Got the error: "Unable to mount SAMSUNG_Android Error initialising camera: -60: Could not lock the device" Wanted to use the USB storage and USB tethering, so I enabled USB debug mode. So did this on the phone: Settings > Applications > Development > USB Debugging Ubuntu can't see the phone. Then tried:
Settings > Wireless and Network > Tethering and Portable Hotspot Settings > USB Tethering.
Still no joy. Typing "lsusb" in terminal gives me:
[code]....
it sees it in lsusb, but nowhere else, so I still can't copy and sync etc. Anyone come across this problem, and if so, how were you able to solve it.
I just installed Linux Mint Debian Edition on my friend's laptop. The biggest problem is getting his iPhone 4 to mount. On libimobiledevice.org it shows a cool video of a guy managing his iPhone with Linux thanks to libimobiledevice. libimobiledevice.org also says libimobiledevice supports the iPhone 4. But when he plugs it in, he gets an error that says:
Quote: Unable to mount location: Unhandled Lockdown error (-5) It's a serious issue and needs to be resolved ASAP. ***EDIT*** If this is a hardware topic, any mods can feel free to move it.
I'm having some trouble with NAT in my gateway.For the 10.13.0.0/16 network, I do not want to apply NAT through the gateway. However, the way it is configured, it is applying SOURCE NAT to traffic coming from 10.13.0.0/16 and changing source ip address to 8.8.8.1
For example, pinging from 10.13.0.11 to 10.101.14.1 (passing through the gateway, which is also a router in this case), then SNAT is applied and the ip packet gets changed to :
--------------------------------
| source address : 8.8.8.1_____|
--------------------------------
| dest. address_ : 10.101.14.1 |
--------------------------------
NAT's configuration in gateway/router:
Code:
iptables -t nat -A POSTROUTING -d 8.8.8.0/24 -o $EXTERNAL -j RETURN
iptables -t nat -A POSTROUTING -d 10.0.0.0/8 -o $EXTERNAL -j RETURN
iptables -t nat -A POSTROUTING -o $EXTERNAL -j LOG
[code]...
system occurs "Too many files open exception" when application server run serval hours. I use "ls -l /proc/pid/fd" command view all fd in this java process.I found that the number of pipe is increase slowly and constantly.
Who can tell me What mean of follow line:
I tried to run xfire with wine (yes, i installed it with wine also from the installer) , and it gave me an exception error (picture in attachments), how do i fix this?
View 1 Replies View RelatedI writed Quote:
#!/usr/bin/perl -w
use Error qw(:try);
try {
[code]....
I am writing an application that uses POSIX thread. I am spawning a threads and threads performs task in infinite loop .I have another monitor which monitors the activities of these threads. Due to some reason I have to kill one thread from monitor thread. so I use pthread_cancel() . It terminates thread however it throws exception. I searched about the exception on internet and i am able to catch the exception and handle it as well . However the exception is not thrown every time . I wanted to know under what circumstances it throws exception. Accordingly I have to write cleanup handler
View 1 Replies View RelatedI'm getting exception 13 when trying to use the latest qemu-kvm-0.12.3 on slackware 12.2 w/ stock 2.6.27.7 kernel:
Code:
exception 13 (6b)
rax 0000000000000010 rbx 0000000000008c00 rcx 0000000000006ebe rdx 00000000000c8c00
rsi 00000000f2010000 rdi 00000000000c0000 rsp 0000000000006eb4 rbp 00000000f2010000
[code]....
Google says this has something to do with Intel hardware and the way it handles real mode. run it with -no-kvm, but that's not much of a fix really.. so in the mean time I reverted to using qemu-kvm-devel-88 which works well, but is pretty old.
I want a internet browser to open a site that needs java engine,firefox has not this and also galeon :
The certificate is not trusted because it is self-signed.
(Error code: sec_error_ca_cert_invalid)
* This could be a problem with the server's configuration, or it could be someone trying to impersonate the server.
* If you have connected to this server successfully in the past, the error may be temporary, and you can try again later.
Or you can add an exception
You should not add an exception if you are using an internet connection that you do not trust completely or if you are not used to seeing a warning for this server.
If you still wish to add an exception for this site, you can do so in your advanced encryption settings.
How i can add exception or it is better to say me that :is there any browser instead of internet explorer for linux??
pidgin started crashing today for no apparent reason. It just shutdowns. No freezing or anything, it just goes away, disappears. From what I can say, there's no specific trigger for this, it can happen after 2 or 10 min after I started it. Once it even shutdown right 10seconds. I tried to run it from the terminal. When I do that, the only thing that appears before closing is
Code:
Floating point exception Anyone has an idea of what it can be? I made no upgrade to pidgin or libpurple recently. I made however an upgrade today of the following packages
Code:
Commit Log for Thu Feb 18 10:24:00 2010
[Code]...
I have a cron job that backs up some files over to an external disk.It ignores the hidden folders in my home dir, by using the --exclude-from option.However, there is one specific hidden dir that I do want to back up.Is there some way to add an exception to the list of exclusions?
View 2 Replies View RelatedI am facing floating point exception issues in running top on some of my Red-Hat Linux servers
# top
6:45am up 476 days, 52 min, 4 users, load average: 0.00, 0.00, 0.00
109 processes: 108 sleeping, 1 running, 0 zombie, 0 stopped
Floating point exception
When I am executing the same command using strace or ltrace, its running fine.
# ls -lrt /usr/bin/top
[Code]...
After completing the installation using kickstart , the exception is occured, just after performing post installation,i am sending the exception image
View 8 Replies View RelatedI have problem in installing Fedora10 on to a UsbHarddisk(transend 250GB).
After installation of some packages it is saying that "An exception has occured .It is possibly a bug.file a report to bugzilla.redhat.com".
The problem is that,ihave previously seen this kind of message a month ago.And when i tried to install the second time it is installed.
Can i debug it?
I have no problem when installing Fedora on to a normalharddisk.
Another question can i install both Gnome and Kde on the disk.
To parse several XML documents I'm using libxml++. I do programming for linux angstrom-armv5te. Because compiling libxml++ for this distribution and platform was impossible, I simply included the library to my project, which workes fine. Unfortunately I'm not able not use the exception handing which effects that a simple error inside a documents makes my whole program crash. This should not happen.
Is there a way to check the documents validity before parsing or better active the exception handling for doing this.
games, specifically solitaire and gimp both have started returning a floating point exception fault.
View 9 Replies View RelatedI had fuzzy icons in system tray so before couple of days i installed some updates and after that i have floating point exception in ktorrent and virtualbox 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 athlon i386 GNU/Linux
nvidia 9500 GT
X.Org X Server 1.8.0
KDE 4.4.4
Here is the updates
nvidia-gfxG02-kmp-desktop-260.19.21_k2.6.34.0_12-19.1 Tue 04 Jan 2011 04:14:42 PM CET
x11-video-nvidiaG02-260.19.21-20.1
[Code]...
My computer acts strange - sometimes reboots spontanousely, sometimes does not want to boot. When I isse command "mcelog", I receive such info:
[Code]..
How can I read and understand it? Could somebody point me to some documentation?
When I try to open Banshee, I can see the GUI for about half a second, then it closes with "Unhandled Exception: GLib.GException: Can't recursively copy directory".I'm running Ubuntu 10.10 amd64, and had an old version of banshee installed from a few releases back (don't remember which). I deleted the banshee-1 folder in my ~/.config directly, as well as uninstalled and reinstalled with no luck. Other Mono apps (such as gnome-do) work fine.Here is the full output of "banshee --debug":
** Running Mono with --debug **
[1 Info 21:09:19.692] Running Banshee 1.7.6: [Ubuntu maverick (development branch) (linux-gnu, x86_64) @ 2010-09-18 21:00:29 UTC]
[code]....
This is the first time I post a question on these forums My problem is as follows: I can't start gnome-terminal from the Applications->Accesories menu or from the Alt+F2 application launcher. I get a "Starting Terminal" in the task-bar that disappears after a few seconds and no terminal. I'm pretty sure there is something I did, but I can't really figure out what it is.
The things I've tried so far:
1. I used synaptic to remove and reinstall gnome-terminal. That didn't work
2. Started Xterm and tried to run "gnome-terminal". This is where it gets weird for me:
a. running the command as normal user I get a "Floating point exception" error and obviosly no terminal
b. when I do "sudo gnome-terminal" and enter the root password I get, as expected, a root terminal. I could live with that, but it's not ideal.
Squid acl rules can be configured to allow specific ip's to get full access, or rather skips the blocked site list.
acl <tag> src x.x.x.x
http_access allow <tag>
http_access deny blocksites
From all the ways i tried, squid does not log these urls. Is there a way to have squid log the urls requested from allowed ip's?
Specs:
squid ver : (squid/2.6.STABLE21)
OS : CentOS 5.5
Ubuntu 9.10 64-bit. I was importing photos into f-spot. Then my laptop shutdown because it overheated (a different problem). Now f-spot will not open. A dialog pops up and says "F-Spot Encountered a Fatal Error. Exception has been thrown by the target of an invocation." Here are the error details:
Code:
An unhandled exception was thrown: Exception has been thrown by the target of an invocation.at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000]
[Code]...
I've read somewhere that there might be a bug with themes, but I've changed mine back and forth. I don't really think this is a bug as much as something that happened when the computer crashed. I've tried uninstalling f-spot and reinstalling it, I get the same error above. Anybody have any idea on how to get it working again?
I have been trying to convert a DVD9 to DVD5 using the following steps
1)Rip the DVD title(s) to harddisk with DVD:RIP in a project folder. This created VOB files of the the movie and the soundtrack you picked.
2)Concatenate (merge) the VOB files into one by running in a console: cat *.vob > movie.vob
3)demutliplex movie.vob and get the M2V and AC3 files out of there. tcextract -i movie.vob -t vob -x mpeg2 > movie.m2v
4)tcextract -i movie.vob -a 0 -x ac3 -t vob > movie.ac3
5)I then shrank the movie.m2v tcrequant -i movie.m2v -o shrinked.m2v -f 1.5
[Code]...