OpenSUSE :: Suse 11.3 Floating Point Exception After Update?
Jan 9, 2011
I had fuzzy icons in system tray so before couple of days i installed some updates and after that i have floating point exception in ktorrent and virtualbox 2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 athlon i386 GNU/Linux
nvidia 9500 GT
X.Org X Server 1.8.0
KDE 4.4.4
Here is the updates
nvidia-gfxG02-kmp-desktop-260.19.21_k2.6.34.0_12-19.1 Tue 04 Jan 2011 04:14:42 PM CET
x11-video-nvidiaG02-260.19.21-20.1
[Code]...
View 4 Replies
ADVERTISEMENT
Mar 12, 2010
games, specifically solitaire and gimp both have started returning a floating point exception fault.
View 9 Replies
View Related
Feb 18, 2010
pidgin started crashing today for no apparent reason. It just shutdowns. No freezing or anything, it just goes away, disappears. From what I can say, there's no specific trigger for this, it can happen after 2 or 10 min after I started it. Once it even shutdown right 10seconds. I tried to run it from the terminal. When I do that, the only thing that appears before closing is
Code:
Floating point exception Anyone has an idea of what it can be? I made no upgrade to pidgin or libpurple recently. I made however an upgrade today of the following packages
Code:
Commit Log for Thu Feb 18 10:24:00 2010
[Code]...
View 1 Replies
View Related
Jan 5, 2010
I am facing floating point exception issues in running top on some of my Red-Hat Linux servers
# top
6:45am up 476 days, 52 min, 4 users, load average: 0.00, 0.00, 0.00
109 processes: 108 sleeping, 1 running, 0 zombie, 0 stopped
Floating point exception
When I am executing the same command using strace or ltrace, its running fine.
# ls -lrt /usr/bin/top
[Code]...
View 1 Replies
View Related
Jul 1, 2010
I am using a gateway server, 1st NIC eth0 which is acting as WAN (DHCP)and 2nd NIC acting LAN(static). I am using DHCP to assign IP to eth0 from a Wimax modem. I am also use it as a MAIL server (openmail), and as a DHCP server. My server is of RHEL and kernel version is 2.4.8.18-14 and DHCP client & server version - 30pl1-9. The prolem is whenever I run the command..
ifup eth0
getting the error...
Determining IP information for eth0.../ifup: line277: 23328 Floating point exception/sbin/dhclient ${DHCLIENTARGS} ${DEVICE}
so what should I do?? if I update the DHCP, would it be ok?
View 1 Replies
View Related
May 27, 2011
This is the first time I post a question on these forums My problem is as follows: I can't start gnome-terminal from the Applications->Accesories menu or from the Alt+F2 application launcher. I get a "Starting Terminal" in the task-bar that disappears after a few seconds and no terminal. I'm pretty sure there is something I did, but I can't really figure out what it is.
The things I've tried so far:
1. I used synaptic to remove and reinstall gnome-terminal. That didn't work
2. Started Xterm and tried to run "gnome-terminal". This is where it gets weird for me:
a. running the command as normal user I get a "Floating point exception" error and obviosly no terminal
b. when I do "sudo gnome-terminal" and enter the root password I get, as expected, a root terminal. I could live with that, but it's not ideal.
View 8 Replies
View Related
Oct 14, 2010
I have been trying to convert a DVD9 to DVD5 using the following steps
1)Rip the DVD title(s) to harddisk with DVD:RIP in a project folder. This created VOB files of the the movie and the soundtrack you picked.
2)Concatenate (merge) the VOB files into one by running in a console: cat *.vob > movie.vob
3)demutliplex movie.vob and get the M2V and AC3 files out of there. tcextract -i movie.vob -t vob -x mpeg2 > movie.m2v
4)tcextract -i movie.vob -a 0 -x ac3 -t vob > movie.ac3
5)I then shrank the movie.m2v tcrequant -i movie.m2v -o shrinked.m2v -f 1.5
[Code]...
View 2 Replies
View Related
Feb 1, 2011
why installing kde 4.6 from factory repos went wrong ? i used zypper dup with oss, non-oss and update repos for 11.3 to reset to default install and boot went ok :
this goes with the following package versions:
$ kded4 --version
Qt�: 4.6.3
KDE�: 4.4.4 (KDE 4.4.4) "release 3"
i'm using this x86 kernel :
[Code]...
my problem : when i add factory repos (core and extra) for kde install of packages from yast is ok when switching system packages to these. but after reboot i have floating point exceptions and a black screen and can' t boot anymore. the only way out i found so far is to zypper dup to go back to kde 4.4.4
View 8 Replies
View Related
Dec 7, 2009
I'm running CentOS 5.4.In the last three days I've started to get various cron errors:
/bin/sh: line 1: 7066 Segmentation fault /usr/local/scripts/cron.email.sshd.access/cron.email.sshd.access.pl
/bin/sh: line 1: 4822 Floating point exceptionsudo -u mobile getmail --quiet
Can't load '/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/RRDs/RRDs.so'
[code]...
Then yesterday I rebooted, and all the other errors seemed to have disappeared for now, but, I am now getting:
/bin/sh: line 1: 23600 Segmentation fault sudo -u mobile getmail --quiet
I have setup cron to call getmail once every 3 minutes, and I get this error about 4-6 times an hour.
View 11 Replies
View Related
May 1, 2010
I just Installed Xubuntu 10.04 and as I was using it, the panels dissapeared. I tried running xfce4-panel but I get a "floating point exception" message. what might be causeing this?
View 3 Replies
View Related
Mar 17, 2011
Just updated WinFF to version 1.3.2-1.1. Since then it won't start up any more due to a floating point exeption. System: OpenSUSE 11.4 (x86) + KDE 4.6.0 Debug info:
WARNING] Out of OEM specific VK codes, changing to unassigned
[WARNING] Out of unassigned VK codes, assigning $FF
ERROR in LCL: TLRSObjectReader.SkipValue unknown valuetype
Creating gdb catchable error:
$080D1568
[Code]...
I had the same error with earlier versions of WinFF in earlier versions of OpenSUSE. Then I could fix it by changing the KDE window styles. The error also occurs with the WinFF qt-version.
View 1 Replies
View Related
Sep 9, 2010
I am dealing with money and I don't want it to show $.1, I'd rather it show $.10 Is there a way to change this in C++?
View 4 Replies
View Related
May 10, 2011
I know it is wrong to use the "==" operator to compare the equality of two floating point numbers. Logically it would seem that if the "==" operator is not usable for floating point comparison, then the "<=" operator would also not be usable. Is this true? The lack of google search results on this topic made me think that it must be true. If that is true, then is it true that the only way to compare floats with <= or >= is with something like the code below? Code: bool smaller_than_or_equal(float a, float b) {
if ( fabs(a-b) < EPSILON){return true;}
else if (a < b) {return true;}
else {return false;}
} I think this is a general question, but if specifics are necessary, I am using the C++ language to code at the moment.
View 5 Replies
View Related
Jun 5, 2011
I'm reading a book on assembly, and it talks a bit about the IEEE floating point format.
Quote:
To summarize, the following steps are used to convert a decimal number to IEEE single format: 1. The leading bit of the floating point format is 0 for a positive number and 1 for a negative number. 2. Write the unsigned number in binary. 3. Write the binary number in binary scientific notation f23.f22 ... f0 2^e, where f23 = 1. There are 24 fraction bits, but it is not necessary to write trailing 0's. 4. Add a bias of 127 to the exponent e. This sum, in binary form, is the next 8 bits of the answer, following the sign bit. (Adding a bias is an alternative to storing the exponent as a signed number.) 5. The fraction bits f22f21 ... f0 form the last 23 bits of the floating point number. The leading bit f23 (which is always 1) is dropped.
View 1 Replies
View Related
Feb 17, 2009
I put an SD card in a reader, got all the right signs from the kernel (SCSI device: sda; write-through; etc.)including its 2GB size.
When I try to mount /dev/sda1 I get 'floating point exception' as a response, and it won't mount.
I've never had that message returned from mount, and I can't find any reference to it.
View 1 Replies
View Related
Apr 14, 2011
One of those odd things I learned the hard way is that if you are writing a shared object (library/.so) and any programs that will link to that library uses floating point numbers, the library must be compiled as if it uses floating point numbers. What that really means is, you need to declare at least one float in the source for the library or when the caller connects and tries to run code in the library, the process aborts.I end up putting a float pi (3.1415); in the code and getting an unused variable warning all the time. There has to be a simpler way, some flag to pass to g++ that says, "include floating point support even if you don't really need to."
p.s. Gosh I hope I remembered this correctly. I encountered this problem doing a multi-platform build for Windows and Linux. This COULD be a VC++ problem that I just carried into Linux by using the same source.
View 1 Replies
View Related
May 1, 2010
Over the last few months there have been multiple updates and I am getting a list of things that no longer work or that cause my system to fail. I can no longer open a pdf in firefox. It says there is no application assigned to the task. I ran evince and tried to open a pdf file and received a "floating point" error message on the terminal screen I was working from.
View 1 Replies
View Related
Jun 28, 2011
I am getting error Fortran runtime error: Bad value during floating point read. How do I format negative sign?
[code]...
View 1 Replies
View Related
Apr 7, 2011
how to perform floating point operations in kernel? i answered that its impossible to perform floating point operations in kernel.but he is telling that its possible but with some feature to be added.can any body know about this perfectly??
View 1 Replies
View Related
Jan 29, 2011
I have a .txt file with the format
0.01
0.04
0.07
...
0.83
I am wanting to load this into octave and perform operations on the data.
[Code]...
View 2 Replies
View Related
May 15, 2010
My main problem right now is doing floating point arithmetic within a bash script, with variables.Right now I have a folder called "myExamples" with a script called "run_example" that runs with no issues.I plan to(1) create many folders inside [myExamples], that are named [example10] [example11]...each containing an identical copy of (run_example),(2) modify Line 172 of each copy of (run_example)...in one copy, it would be 3.00, the next copy would have 3.05, etc. (This part doesn't work!)How can use the available calculator bc code to do floating point operations?My code is below -
#!/bin/sh
# run from directory where this script is
cd `echo $0 | sed 's/(.*)/.*/1/'` # extract pathname
[code]...
View 2 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Mar 28, 2010
I have tried to learn how 64bit asm (nasm in my case) works and found, among the many disparate pieces of info on the net, a few vague inferences that floating point registers can be used for other purposes than what they are intended for, example: "64-bit Linux allows up to fourteen parameters to be transferred in registers (6 integer and 8 floating point)." This would be fantastic for string operations/manipulation (I have never used asm for floating-point operations), can anyone shed a bit of light?
View 8 Replies
View Related
Apr 2, 2009
After update to 5.3 and reboot I got this error. googling for it I found that it is a known bug in kernel REHL 5.3 and there is also a patch for it [URL]. I am very new to linux, so how to apply, or just wait for a new kernel?
View 4 Replies
View Related
Jan 10, 2009
I have suse 11.0 installed and now that 11.1 is out i would like to update. I have searched for this already and have found three ways of doing it:
zypper dup
zypper up
in YAST view all packages and right click and click update all if update available.
I have tried all these methods but i still seem to be running Suse 11.0 as it says in sysinfo:/ . How do i successfully update from 11.0 to 11.1?
View 9 Replies
View Related
Jun 13, 2010
I tried to download the Suse 11.2 DVD to do an install. When I went to do the install it failed cause it was corrupt.Not to big of deal, I had an older version of 10.2.Now that I have 10.2 installed, is there a way for me to upgrade this to 11.2 without downloading the Install DVD.I've been away from messing with Linux for a few months so I'm pretty darn rusty. I'll run Linux for awhile and when I get frustrated I'll move back to Windows. I'll mess with that for a few months and then go back to Linux...
View 6 Replies
View Related
Apr 9, 2011
someone decided for whatever reason to ship Suse 11.4 with a broken version of Scribus. Not only is the application missing in the KDE-Menu after installation (had to add it manually) but it is crashing frequently. Whenever one adds new text in a Textbox (which will NOT be formated with the specified default font but the first in the list) and then immediately changes the font without first leaving the input-focus of that box: Segfault / signal 11. I understand that there is a RC2 out by now and the specific error seems to be fixed by that.
Now my question is: After having decided to ship sUSE 11.4 with a RC: Will further RCs and maybe the final release of scribus be shipped by the OpenSuse Update? Or does the user have to manually install a working version of that software?
View 9 Replies
View Related
Feb 21, 2010
i want to updates softwares such firefox throuth internet.. how can i do it..my internet connection is running well
View 2 Replies
View Related
Jul 19, 2010
if I can update the OS (new security updates,patches etc also) on a system that ain't having any internet connection. Simply i would like to know if there is any packs like rpm/ tar files available, so that we can install the updates easily..I am using opensuse..
View 9 Replies
View Related
Apr 16, 2010
I'm wondering why everytime I install "recomended" updates, my KDE or X server crashes completely! is there any guide or advice you can give me to succesfully update only the packages that are really needed?
View 9 Replies
View Related
