Hardware :: Extra Keys Not Working On Logitech Cordless Desktop LX710?

Jan 14, 2010

I am running Debian unstable, kernel 2.6.32-trunk-amd64.

The box says it's a Logitech Cordless Desktop Wave. lsusb says it's a "Bus 003 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser".

The zoom keys and the other key on the left don't work. The configuration and camera key don't work. The music and media centre keys both think they're the configuation key.

However, the Previous, Next, Stop, Play, Mute, Volume Up/Down, Calculator, and Sleep keys work.

Following is heaps of spam. I hope somebody can make some sense of it. :P

Quote:

dmesg | grep -i usb
[ 0.955642] usbcore: registered new interface driver usbfs
[ 0.955667] usbcore: registered new interface driver hub
[ 0.961156] usbcore: registered new device driver usb
[ 0.962332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[Code].....

View 4 Replies


ADVERTISEMENT

Hardware :: Cannot Wake From Suspend With Logitech EX100 Cordless Desktop

Sep 10, 2010

I am trying to make my computer to wake from suspend by either pressing a key or clicking the mouse. (It doesn't by default.) I have a Logitech EX100 Cordless Desktop. I tried enabling USB1 (the port the receiver is plugged into) in /proc/acpi/wakeup, but now the computer wakes up instantly when I try to put it to sleep. Anyone know how to make it stay asleep, and then wake up when I either click the mouse or press a key?

View 4 Replies View Related

Ubuntu Installation :: Unmitigated Disaster - Logitech Cordless Keyboard Is Not Working

Jun 28, 2011

I have been a keen user of Ubuntu since version 7.something. In that time I have updated, upgraded, or done clean installs of each new versions usually about 2 months after the release to enable small bugs to iron out. There have always been minor issues usually easily rectified via this forum. However the 11.04 release is the worst I have ever come across almost forcing me back to winblows. So what is my gripe. -- 7 hours downloading and upgrading -- to obtain a system that does nothing -- nada. zip. it booted came to the desktop and nothing, Unity doesn't respond, no applications open, and the shutdown didn't work.

So -- downloaded the ISO this morning did a clean install and eagerly went into my new system. First issue -- my logitech cordless keyboard is not working, never had an issue before. so plug in a USB one, which is what I am using now. Go to the 'system settings' (took me a while to find where they had gone) but couldn't find anything in the keyboard section to allow me to configure a cordless keyboard. Failure 1

Open banshee and ask it to load the music library. It does, then click for a file to play and --- no sound! so choose another track just in case and banshee crashes, and the icon disappears from the unity bar. Failure 2 As usual I have an Nvidea graphics card so one of the first things is to install the proprietary driver. Never had an issue before. this time it loaded (apparently) and then I do the restart to enable it, and when I get back in there is no top bar, the Unity bar sits there and won't slide in and out, and no applications will respond. BIG failure 3

Re boot into recovery mode and opt for safe graphics mode. System re boots - Top bar now appears, Unity remains inoperative, and when I click the shutdown icon to get to system settings --- crash and burn system shuts down.-- BIG failure 4 Re boot into recovery mode (again) run "fix broken packages" DPKG runs for a while replacing and upgrading hundreds of packages. When finished reboot -- same issue desktop stuffed! Currently working off the live CD. To the developers -- maybe you are pushing ahead too quickly now. this sort of overall failure will lose more users than gain. I don't usually complain but as my title says for me Natty is an unmitigated disaster.

View 6 Replies View Related

OpenSUSE :: Using Extra Keys For Launching Applications?

Aug 12, 2010

I own a Microsoft Wireless Keyboard 1000 which I'm overall pleased with. The keyboard has some extra media and application launching keys which I try to assign in systemsettings>Input Actions. I believe the application is called khotkeys, however I'm not sure. Four different cases occurred as follows: The keys are recognized and can be assigned a command to run. When settings are saved the specified application launches. Examples of keys that works:

Code:
Physical key symbol : Recognized by khotkeys as : HEX code send by keyboard (obtained by showkeys)
Headphones : Tools : keycode 171 press, keycode 171 release
House : Home Page : keycode 172 press, keycode 172 release
All media keys (play/pause, next, prev, stop, vol-up, vol-down & mute)

[Code].....

View 1 Replies View Related

General :: Control-Up,Down,Left,Right As Extra Keys?

Feb 18, 2010

Is there any way of getting the arrow keys to act differently while the control key is pressed. On my system ^-Up and Up generate the same code...

View 3 Replies View Related

OpenSUSE Hardware :: Logitech G11 Keyboard G Keys?

Jun 14, 2010

I found this:Software.openSUSE.orgIt's supposed to make G keys work and make them programmable, but i don't know if it'll work for G11 keyboard...Did anyone manage to get the G11 macros to work in Linux?I'm using openSUSE 11.2. 64 bit.I tried searching in YAST for some drivers or something, but couldn't find anything...

View 1 Replies View Related

OpenSUSE Hardware :: Mapping G Keys On Logitech G15 Keyboard?

Dec 10, 2010

how to map the G keys. i tryed installing g15 daemon but now what am i supposed to do?

View 1 Replies View Related

OpenSUSE Hardware :: Logitech Wireless Keyboard And Shift And Ctrl Keys

Mar 2, 2011

So Ive had this issue off and on for a while now, but have never really looked to see if others have had it or how I can fix it. Essentially the problem is that kde seems to randomly decide that I am holding down the shift or ctrl key.Im using a logitech cordless desktop s510, running openSUSE 11.3 x86_64. Ive had this problem on and off using a couple of different logitech keyboards. The most often time when it happens with the shift key is when im coding, and the control key when Im running a keyboard shortcut.

I can usually fix the issue by holding down the key that kde thinks is pressed for like 5-10 seconds and releasing, however sometimes I have to unplug and then replug in the usb adapter for kde to get things right. This doesnt happen if im running a non-graphical terminal (thouhg I cant say whether it happens in gnome as I dont have gnome installed) so I am thinking its related to kde. The keyboard can be plugged into other computers and they dont act the same way.

This gets esspecially annoying when Im coding (because of all the symbols) and generally when the issue occurs. I think it may have something to do with the key being pressed for over a certain length.

View 7 Replies View Related

Hardware :: Keyboard Keys Messed Up On Logitech Illuminated Keyboard

Mar 15, 2010

When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.

View 2 Replies View Related

Ubuntu :: How To Install Another Desktop Without Extra Packages

Mar 3, 2011

I want to know how to install KDE on Ubuntu and Gnome on Kubuntu.
The commands
apt-get install ubuntu-desktop
apt-get install kubuntu-desktop
are not the solution, because they install all distro packages, and I want only the base of desktops KDE and Gnome.

I can install LXDE with
apt-get install lxde
instead of
apt-get install lubuntu-desktop

I can install Xfce with
apt-get install xfce4
instead of
apt-get install xubuntu-desktop
However, I could not do the same with KDE and Gnome.

View 2 Replies View Related

Ubuntu :: Can't Enable Normal Or Extra Desktop Effects

Aug 16, 2010

I have Lucid lynx on my laptop, its been working perfectly for months. Recently been trying to get flash videos on sites to play and came across a 'fix' that said to disable desktop effects, which I did.

That didn't work and afterward found out that adobe flash 10 don't work on 64-bit linux, which is what I have. Tried to re-enable desktop effects to normal but got "cannot load desktop effects" popup.

I've removed nvidia driver, reinstall it, tried to enable desktop effects, didn't work. Ran nvidia-settings which said to run as root nvidia-xconfig and restart X(alt-printscr-k), which I did, it didn't work. I just want my desktop effects back, I had it on extra.

Edit: Forgot to mention that at boot, after grub menu nothing shows. No login screen. I have to add "nomodeset" by pressing e at boot menu and typing it to the boot options to get a dialog to choose restart x which then shows the login screen.

Update: I've been searching all over, tried to install by downloading from nvidia site, didn't work, been rebooting like crazy after every try. Installed a bunch of nvidia files from software center and got hardware drivers to have nvidia current. The driver is activated and in use. However I still can't enable desktop effects and ubuntu doesn't boot normally. After the grub menu it shows the logo for a second then blank screen. I have to boot with nomodeset and choose to restart x or start in low graphics mode.

Please help me fix this.

View 1 Replies View Related

General :: Can't Enable Desktop Effects When I Try To Add Extra / Solve This?

Jul 12, 2011

When i try to add extra effects it says cannot enable desktop effects..and then i type compiz --replace it says

compiz (core) - Fatal: Software rendering detected.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

Launching fallback window manager
what i have to do to enable effects..

View 3 Replies View Related

Ubuntu :: Dual Screens: Need Mirror Image Not Extra Desktop?

Sep 8, 2010

I'm using an Intel chipset GMA4500 and Ubuntu 10.04 Gnome. The monitor configuration tool does not seem to have an option to make the secondary screen a mirror image of the primary screen. It works fine when I connect my TV using HDMI as a second screen, but I want it to be a mirror of the primary, because some apps like Skype will only go "full screen" on the primary display.

View 2 Replies View Related

Ubuntu :: Logitech App Not Working?

Jul 5, 2010

I installed two apps that were supposed to give me more settings for my mouse. I installed from Synaptic and everything seemed to work fine, but I can't find anywhere to start the apps so I can do the adjustments. where I can find these to run them?

View 4 Replies View Related

Ubuntu :: Voip To A Cordless Handset?

Mar 20, 2010

get cheap local and long distance phone service with a cordless handset around the house. I'm willing to invest some money into hardware. I have a small form factor Ubuntu computer with Atheros pci card that I use as my wireless access point. The only idea I have right now is buying a BELKIN F1PP000GN-SK Wi-Fi, which runs Skype with only needing a wifi connection. I to hear other ideas even if they are pretty technical

View 1 Replies View Related

Ubuntu :: Three Monitors - Xinerama And Cannot Get Desktop Effects Running At Normal Or Extra

Feb 28, 2010

Currently I have a perfect setup of 3 monitors,2 GPUs running under Xinerama. I cannot get desktop effects running at Normal or Extra, when I try to enable either one I get the following message "The Composite extension is not available". Without Xinerama it works along with Compiz. I am running Ubuntu 9.04 x64 with a ATI HD4870 and ATI HD4350 GPU. I have the latest ATI display drivers (set up properly to my knowledge). Here is my xorg.conf file.

[Code]....

View 3 Replies View Related

Ubuntu :: Logitech Speakers Not Working?

Apr 5, 2010

I have a set of logitech r20 speakers that I can't get working. Does anyone know where I can download a driver?

View 2 Replies View Related

Slackware :: Logitech Webcam Not Working

Oct 15, 2009

lsusb:

Code:

lsmod ouput:

Code:

So it loads gspca_zc3xx, but it obviously doesn't work.

Runiing 13 64bit, full install, default kernel.

View 14 Replies View Related

Ubuntu :: Extra Screensavers No Longer Working?

May 26, 2010

I've recently installed the package xscreensaver-gl-extra, and noticed not one of the screensavers on that package works - all I get is a blank screen on all of them. However, I remember those screensavers working under Jaunty on exactly the same hardware (didn't test them on Karmic).How can I make them work again?

View 7 Replies View Related

Ubuntu :: Logitech SetPoint - Allows More Functions For Logitech Keyboards And Mice

Apr 15, 2010

Does anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.

View 2 Replies View Related

OpenSUSE Hardware :: Logitech Quickcam Not Working?

Aug 15, 2010

Code:
lsusb
046d:08af Logitech, Inc. QuickCam Easy/Cool

Apparently, this webcam uses the gspca2 driver. The gspca modules are loaded but if I try using a program like cheese it tells me no device was detected.

Code:
hwinfo --usb
17: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: YccR.9AtOl3Z230E

[Code]....

If I do a modprobe -rf gspca_zc3xx and then modprobe gspca_zc3xx I see the light blink a couple times, but it still doesn't work in cheese.

View 4 Replies View Related

Ubuntu Multimedia :: 10.04 - How To Get Logitech Webcam Working

Sep 21, 2010

Just found my old Logitech webcam again, and tried to get it to work on 10.04. Somehow this doesn't work. I tried searching the forum, but did not get an answer to my situation.

Here is what I can see:
After connecting (or rebooting), dmesg shows the following lines
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08cc)
input: UVC Camera (046d:08cc) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo

And that's it. No message that cam was registered to /dev/video<x>. I should add that I already have another cam (Philips) that works and is registered to /dev/video0, and I also installed a Hauppauge PVR350 card that also gets registered to various /dev/video<y> files. Why the Logitech cam won't register? I'm guessing I can't do anything until this cam has its own /dev/video<x>, right?

View 1 Replies View Related

Ubuntu Installation :: Logitech USB Speakers Not Working / Get That?

Nov 7, 2010

I have logitech USB speakers with remote i couldn't find drivers on logitech website

i don't know how to make them work

View 5 Replies View Related

Ubuntu Multimedia :: Old Logitech Webcam Not Working On 11.04?

Jul 10, 2011

I upgraded recently to Ubuntu 11.04 and have been trying unsuccessfully since to use an old webcam: Logitech Quickcam Messenger. The system doesn't recognize it at all as far as I can tell, which it did on 10.10 (I didn't really use it then, I just remember I could get a picture at some point.

View 1 Replies View Related

OpenSUSE :: Logitech Webcam (C200) Not Working With Empathy?

Mar 26, 2011

I installed Suse 11.4 on a compaq desktop computer. Installed a Logitech webcam. With cam programs like cheese, it is working fine. However, Logitech Webcam (C200) not working with Empathy.

Below some parts of the logfiles:

/usr/bin/lsusb: Bus 001 Device 006: ID 046d:0802 Logitech, Inc. Webcam C200
/usr/bin/lsusb -vv
Bus 001 Device 006: ID 046d:0802 Logitech, Inc. Webcam C200
Device Descriptor:
bLength 18

[Code].....

View 5 Replies View Related

Ubuntu :: Logitech DiNovo Keyboard And Mouse Not Working In 10.04?

May 2, 2010

I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.

since i have a report due for tomorrow and now i have no way of getting in to the system.

View 9 Replies View Related

Ubuntu Installation :: Logitech Laser Mouse Not Working?

Aug 5, 2011

I just bought a usb logitech LS1 laser mouse, plugged it in restarted ubuntu 10.10 and its not working.

Where can i change the mouse?

View 1 Replies View Related

General ::xo Laptop Is Using An Extra Ordinary SD Card Which Has Stopped Working?

Feb 13, 2010

fsck died with exit statusAn automatic file system check of the root file system failed. A manual fsck must be performed then the system restarted. The fsck should be performed in maintenance mode with the root file system mounted in read only mode..This is the message I now get with the word "warning" in red

View 2 Replies View Related

OpenSUSE :: What Exactly Is The Extra Repository /repositories/KDE:/Extra

Jul 18, 2010

there are 2 related to 11.3: openSUSE_11.3/ and openSUSE_11.3_KDE_Distro_Factory/ Index of /repositories/KDE:/Extra they are not listed as official kde4 repos here KDE repositories - openSUSE, but they are in the same directory structure on the build service so it would assume they are official (what ever official means) They have rpm's I didn't see in community and playground (at least for 11.3) such as audex and clementine I would guess that they are for the stable and factory versions of KDE4 but then shouldn't there be a 3rd for unstable if this was the case? Or do they refer to the distro, 11.3 stable and 11.3 factory

View 6 Replies View Related

Debian :: Logitech Trackball Middle Mouse Is Not Working Anymore?

Feb 21, 2011

the Squeeze uprgade I also lost the middle mouse functionaly of my Logitech Marble Mouse. I do not remember how I set it up to be honest. I am not sure if it was by default middle was mouse was "pressing 2 buttons on eachside at the same time" or I did set up manually using Xmod or similar tool. I might have even set up in the hal settings. The reason I do not remember exactly is that I used multiple tuts and places to set this up long time ago and now that the functionality is gone I am kind of confused about how to go ahead about it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved