Hardware :: Display Settings Lost On Reboot?
Jul 21, 2010
I'm running PCLinuxOS 2010.07 (KDE) on my Acer laptop with Intel Mobile GM965/GL960 Integrated Graphics Controller. I have an external Acer monitor that displays at 1920*1080. I have selected my laptops internal screen to be disabled and use the external screen. The PC LinuxOS Control Centre selected the 'Intel later than 810 driver'. All works well whilst I'm using my system but when I turn off and reboot the settings are lost and I have a 1280*800 display on my laptop and the same on my external screen. Resetting the Display using Configure your Desktop allows me to reset the external monitors to my preferences but how can I make theses settings permanent?
View 4 Replies
ADVERTISEMENT
May 16, 2010
I installed Kubuntu on my Toshiba A135 with no problems at all...everything works: sound, wifi, LAN, etc...BUT whenever I reboot/restart the computer my Display and Audio settings revert back to default, and it doesn't happen when I log out, just when I restart/shutdown the computer. I have an Intel 945GM chipset and I have set my external Acer 23" monitor as the default and only monitor with a resolution of 1920x1080@60Hz using KDE's System Settings...And I chose to disable the laptop's internal monitor...but whenever I restart, the display returns to a 1024x800 cloned resolution (the default one)...which by the way looks hideous on a 23" monitor. And also the sound mixer goes back to the default levels.
So, can anyone help me out? I've been using Ubuntu for over 3 years and I've never had any problems like this one. I have just fell in love with Kubuntu, it looks and runs great, but this problem/bug is keeping me from being comfortable with it... I've been reading some things about XRandr and some commands and stuff and nothing have worked until now. I wonder, is it a common bug in Kubuntu or maybe an erroneous setting in the session manager....?
View 5 Replies
View Related
Sep 5, 2011
I run OpenSuse 11.4 with KDE 4.7. When I change the positions of icons in the main plasma panel, or reshape folder view plasmoids on my desktop, these changes are lost when I start my computer the next time...
View 9 Replies
View Related
Feb 2, 2010
I've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
View 14 Replies
View Related
Apr 30, 2010
I have just upgraded to Lucid Lynx. Just after that the borders of disappeared. Anyway, I found out I can get them back if I enable Standard Visual effects from the appearance menu. The only problem ?i have is that the options don't get saved and I need to do this over again every time I reboot.
View 9 Replies
View Related
Jul 30, 2010
I have installed Lucid in a new laptop. Things are running OK except for the following problem:
I connect to the network/Internet using Wired ethernet (TCP/IP) with static IP. Everytime I reboot/restart my network configurations are lost and I have to re-configure. I have googled this problem and have seen a few posts/bugs in launchpad etc. for what appears to be the same issue...but unfortunately I am not getting a clear solution to this problem.
Just for clarity, I am using the following commands to re-configure my network everytime:
Also note that I have already tried editing the /etc/network/interfaces and the /etc/resolv.conf files. But it seems that these are not being picked or are being overridden.
View 2 Replies
View Related
Jul 27, 2011
I turned down my txpower with the command: sudo iwconfig wlan0 txpower 3 Which works to fine turn down my broadcast power from the default value of 15 dBm to 3 dBm. But it is reset every time I restart Ubuntu 11.04 to the default value of 15 dBm. How do I save my modified txpower settings so they don't reset after a restart? It is really annoying having to re-enter the command every time I reboot my computer!
View 2 Replies
View Related
Oct 31, 2009
Im new to fedora 11 and iptables, and i need to set the following set of instruction so VirtuaBox can accept request from lan, to the mailServer in the guest os, but after restart fedora i have to input it all again.How can it become permanent entry in iptables.
View 2 Replies
View Related
Oct 18, 2009
I am running a debian squeeze machine on a ibm t40 laptop with window maker as my window manager. I am using gpointing-device-settings as a program to get the scroll bar on my touch pad working. unfortunately, I can't get the settings to stick after i shutdown and turn on. I have to go into the program and unclick then reclick the button. i'm using version 1.3.2 (ive tried both deb and source versions). does anyone have any ideas on how to fix this? and if there is any configure files that I could configure instead of having to use the gui program.
View 4 Replies
View Related
Jan 28, 2010
I am using GeForce 7600 GSNot using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues.I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK.
View 3 Replies
View Related
Mar 2, 2009
I have entered my primary and secondary DNS addresses through Network Configuration tool (system-config-network). But whenever I reboot the system it loses the DNS addresses. Following another thread, I tried changing the PEERDNS=no in ifcfg-wlan0; but it didn't work. I also put both DNS addresses in the ifcfg file, but that didn't work either.Does anyone know a solution to this?$ uname -aLinux fedoralinux 2.6.27.15-170.2.24.fc10.i686 #1 SMP Wed Feb 11 23:58:12 EST 2009 i686 i686 i386 GNU/Linux
View 11 Replies
View Related
Apr 25, 2010
I was using Ubuntu 9.10 and was using fireftp ( firefox plugin ) to do some ftp operation. And then I noticed firfox is fozen so I reboot my pc by switching off the power ( restart doesn't work ). When I turn it back on again, no GUI anymore. I was taken to ttyl login commend.
View 3 Replies
View Related
Jun 6, 2010
After serveral reboots without problems. My Xubuntu 10.04 LTS now asks for my wifi security keyat every boot. Somehow It looses it.
View 1 Replies
View Related
May 14, 2011
I have a problem with klipper hotkeys. On reboot, they are saved in ~/.kde/share/config/kglobalshortcutrc but don't work anymore. they are visible in "system settings > keyboard and mouse > global shortcuts" in the klipper tab, but just wont work. However, they are not set if I try to access them by klipper menu "right click > configure klipper > shortcuts" It seems that shortcuts aren't even noticed by kde : xev's output from a successful shortcut ( alt+g) (notice the focusout/focusin instead of the keypress):
[code].....
View 1 Replies
View Related
Feb 25, 2010
I running Ubuntu ver 9.04 I have 2 problems that I think are related. After finally making a network connection I updated Ubuntu, and after a reboot I lost my network connection again.I updated the following file nm-networkmanager-settings.conf and saved it. After another reboot I then lost my network connection icon and it also does not appear under System > Preferences. I tried to then update the same file and can not save it, I get "could not save file".I have tried sudoedit, sudo gedit, gksudo gedit and some others that I cna not remember now and all give me the same result
View 2 Replies
View Related
Sep 16, 2009
Google brought me no love on this one, tried searching here with little luck as well. So I'm hoping somebody vastly more experienced than I can shed some light on my plight.
The situation:
I have a CentOS 5.3 x64 server running the latest cPanel which works fantastic. I issued a graceful reboot and the server came back up (according to the DC) just fine to a login prompt. Apparently the system lost all of its IP address configuration. Primary IP, secondary IP's gateway, you name it and it was gone. Now my secondary IP's were showing in cPanel after I had the DC re-enter my main IP address/gateway. But listed as not active due to the fact that they were not anywhere to be attached to the interface. i.e. eth0:1 eth0:2 etc and so on.
I have no idea where to begin looking for this problem and am afraid to reboot it again (at least until I get my lantronix spider up there). I've never experienced this with any of my other CentOS/cPanel servers either. All similar configurations CentOS 5.3 x64, latest cPanel as well. My hardware is all Supermicro gear as well and has been solid in the past.
Maybe I'm just missing something, granted I've only been managing Linux based servers for about two years now. This is actually the first real problem I've ran into on any Linux distro, they are normally pretty solid. So I assume it's a configuration error on my part somewhere.
View 2 Replies
View Related
Jul 12, 2010
I've installed recently on my Eee PC 901 Xubuntu 10.04 and it works very well, but every time when I logout and then log in again, the desktop drops to the default icons and GTK themes. Then I've figured it out: on logout and then login the XFCE's settings daemon xfsettingsd is not loading.
View 3 Replies
View Related
May 24, 2010
I'm having a problem with the mesa-dri-drivers-experimental, I bought a new monitor, Samsung 24" Widescreen LCD Monitor (B2430H) and my old monitor was a 24 inch too but with a different native resolution, my new monitors native resolution is 1680x1050 and I try to change the settings in the system settings/ display/ size&orientation area since the mesa drivers don't have a xorg.conf but my settings don't save after a reboot. Is there a config file for the mesa-dri-drivers-experimental where I can change these settings?
View 5 Replies
View Related
Jan 22, 2010
I noticed that every time I reboot some system settings sort of roll-back automatically to some time in the past.
So far I noticed these:
-All the aMule setting. Includes connection ports and Incoming folder, very annoying.
-Firefox search box engines. every reboot the list of engines rolls back to include a lot of engines i don't want and have to remove every time. this is the only thing in Firefox that is affected, bookmarks and add-ons stick.
-Keyboard layouts. Tried clicking "apply system-wide". still rolls-back after reboot.
What could cause this? How can I set these things permanently?
I'm using ubuntu 9.10 32-bit
View 1 Replies
View Related
Aug 4, 2010
I insert the domain name "g3c" in menu: System->Administration->Network (file attach)
When i reboot the computer this information lost: why ?
Where i must insert this information ?
My s.o. is debian 5.05
View 2 Replies
View Related
Jul 14, 2010
after a reboot of my Lenny system, the default gateway will lost. Then i must try "networking restart" and the gatway will be set
my interfaces looks :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[Code].....
View 1 Replies
View Related
Jun 7, 2010
I have the following problem:
After I installed the new Fedora 13, all went well without problems.
Unfortunately, the sound settings are not retained. That means after a reboot, I have to set this again and again.
I have an: HD 5.1 Intel OnBoard Sound Card. I run "gmix" or "kmix", the rear wheels boxes are always "mute". I put on this, but after the restart the setting are lost.
The PulseAudio settings are set to 5.1 Digital Sound.
What can I do to go the the settings are not lost?
View 3 Replies
View Related
Jan 11, 2010
I encountered problem on my NEW PROD box. I have remaining space of 300GB and i decided the create a /dev/mapper/VolGroup00 using Redhat Gui. It is successful. Then, i decided to create logical volumes out of it..
lvcreate -L 10G -n rawdevice1 VolGroup00
lvcreate -L 30G -n rawdevice2 VolGroup00
lvcreate -L 10G -n rawdevice3 VolGroup00
[code]...
View 1 Replies
View Related
Dec 12, 2010
This is awesome. I configured my Konsole and other KDE settings, and the very next login everything is reverted.
View 8 Replies
View Related
Mar 25, 2011
My first post. I lost all connections to the internet on my Linux Box Yesterday. I have checked my broadband connection and router. OK because I am using them to sent this from my laptop. I have 2 ethernet cards - no indication of a problem with either so I suspect for reasons unknown I have lost all my network settings. The Desktop User Guide says go to the Network Settings Window. I used to have a widget on the Menu Bar which enabled me to check the settings but for some reason it vanished a month or so ago and I can't find how to get it back.
PS In the meantime I am stuck with this crummy Microsoft box the interferes with everything I try to do.
View 3 Replies
View Related
Aug 8, 2011
my computer recently ran out of disk space, and for whatever reason (presumably bad coding!) that caused Evolution to freak out and deny all knowledge of my email account.Fortunately, all the email is still in present in ~/.evolution/mail/imap/me@foo.com but I have no idea how to make Evolution realise that and let me load it again.
View 1 Replies
View Related
Sep 1, 2011
I'm using ubuntu classic on 11.04 (that's not the foolish part). I was tidying up my main menu with the Edit Menu application, and deleted all of the hidden items in the Applications submenu 'Other', including things like Compiz, Metacity, Open Folder, Window Manager.I had believed that this would have no effect on the operation of anything; only upon what was listed in the menu, but the effects seem to have been quite severe and wide-ranging.Now, at reboot, there is no background image, cursor, or windows decorator (I have to get a terminal window open and run compiz --replace), and I cannot open locations from the places Menu (I get an error telling me that no application is registered as handling this file). There are probably other consequences I have yet to discover.
The desktop.configuration files for the 'Other' menu items are still present in Usr/Share/Applications directory.Is there a way that I can restore things to the way they worked before I deleted these Menu items? It would be an enormous help in my predicament.
View 2 Replies
View Related
Sep 9, 2010
Initially, Debian detected my M-Audio soundcard right off, and things were going great, until I tried to get a Logitech webcam working. Got video going, but no audio, so I installed cheese, alsa-base and alsa-utils, and played around with settings according to copious forum threads dedicated to the problem of Linux and webcams, all to no avail. Then I had NO SOUND, until I did a alsa-conf, which detected and (re)set my M-Audio card, until reboot, then again, NO SOUND. Settings were not saving through reboot.
So I purge removed alsa-base and alsa-utils, hoping that things would magically revert to pre-webcam experiment. Still no sound. I have given up on the webcam idea; I'll use my XP Pro laptop for that. But I need sound on this Linux box. Oh and when I'm playing ....., etc. the soundcard itself is making chatter noises to the beat of the music. This soundcard was working perfectly before I started the webcam debacle, so it's not a hardware issue.
View 14 Replies
View Related
May 19, 2011
i just setup the sensors to use with conky. I do this by issuing the following:
Code:
sensors-detect
and
Code:
chkconfig -l lm_sensors
lm_sensors 0:off 1:off 2:on 3:on 4:off 5:on 6:off
reveals that the daemon is setup to start in the particular runlevel.
[Code]....
my investigation has pointed me to the the problem that sensors is useing /etc/sensors3.conf and not /etc/sysconfig/lm_sensors as it should be.
View 5 Replies
View Related
Mar 19, 2010
I'm using Ubuntu Netbook Remix 9.04 in Acer Aspire One together with Windows XP (both on different partitions). The trouble since installing Ubuntu has been that my keyboard has scandinavic layout which includes "" and "" keys. When I assign the layout in Ubuntu's as "FI" instead of "USA" everything is fine. After reboot for some reason the changes made won't stay and I have to change the keyboard layout manually. If I remove "USA" from the list after reboot it'll appear to the list again!
I've tried to create /etc/X11/xorg.conf file with the keyboard configuration code, but it has no effect for the situation. I've tried also command:
Code:
sudo dpkg-reconfigure console-setup This has no effect also.
I'm starting to be frustrated for the situation. I really enjoy using Ubuntu instead of XP but this just doesn't make sense that the keyboard layout won't stay on.
View 2 Replies
View Related
