Hardware :: Burned DVD-R Cannot Be Mounted

Feb 10, 2010

I am able to burn DVDs with either Brasero or k3b, but opensuse then cannot mount them .Those DVDs do contain the burned data since I can see it and read it on a Mac.Never had any problems reading other DVDs. This is the first time I burn my own DVDs. So is there something particular that I should do when burning in order to make them readable on Linux? What shall I check for? The error message mentions a 'wrong fs type'. I didn't format the DVDs before burning them - just used them as purchased - can that be a problem?

View 2 Replies


ADVERTISEMENT

Hardware :: Can't Boot From CD If It Was Burned?

Mar 3, 2010

So I picked up a new (too me) laptop Dell Laditude C640, Tried to install Ubuntu 9.10 on it, won't boot, all bios setting correct. Couldn't figure it out. Went through my stack of distro CD's Oddly I found It WOULD boot FC12, and a Debian Lenny Netinst CD (But not the full install one). Even weirder. Assumed bad CD, re burnt with new;t DL'd iso, Nothing. Tried on different media, Nothing. Burned it on my GF's laptop (Win7) WORKED! WTF kind of crap is that? what can it be doing that K3b / Brasero isn't.

View 11 Replies View Related

Ubuntu :: Could Not Install With Burned Iso?

Feb 24, 2010

i downloaded version 9.10 and created installation cds with infrarecorder, iso recorder and an old version of nero. i could boot to the installation screen but that is how far i could go. selecting and pressing "install" would not start the installation. do i have a bad iso or i burned it the wrong way?

View 2 Replies View Related

Fedora :: Burned CD Volume Levels?

Mar 28, 2010

I don't really now where this goes but figured i start in the general forum, mods please move as needed.I got my f12 install up and running great. I recently burned an audio cd. when i used it in my car i noticed i had to turn the volume up a lot more then on my other burned cds. previously i used my mac to burn cds. the mp3 files are the same, they are located on a external hd that both computers access. the difference is significant. any ideas on why this is?

View 4 Replies View Related

Ubuntu :: Last Few Burned DVDs Won't Mount?

Jul 30, 2010

I've been backing up some data recently because I'm planning to upgrade to 10.04. It had been going well until today. I burned a couple DVDs, tested them, and they were fine. I burned another one, tested it, and it wouldn't mount. Got the following: "Unable to mount media. There is probably no media in the drive." (Was using K3b).

I tried the same one again, this time using GnomeBaker. Seemed to burn alright, but once again would not mount when I tested it. So, I thought maybe it's just this one particular folder. I tried to burn a DVD with completely different data. Same thing, seemed to burn OK, but again it will not mount.

I went back and re-tested the DVDs that worked OK earlier today, and these ones are still mounting. Any ideas? Did my burner suddenly go bad? Or does someone know of any other possibilities that hopefully could be fixed? -using Verbatim 16x DVD-Rs (burned on 8x)-Lite-On SHW-160P6S

-Ubuntu 8.10
-755 MB RAM
-Intel Xeon CPU 1.70GHz
-used no multisession (or finalized in Gnomebaker)
-used linux+windows filesystem

-I was burning mostly video files (.avi, a couple of .wmv, couple of text files, subfolders with other .avi, etc.)--basically the same type of data whether they could mount or not.

View 1 Replies View Related

Ubuntu :: Read A CD Burned By A Mac On Machine?

Oct 6, 2010

how to read a CD, burned by a Mac, on my Ubuntu machine. Is there any way possible to do this? I'm sure there would have to be a way because, well, Mac and Ubuntu have their similarities..

View 8 Replies View Related

Ubuntu Multimedia :: Multiple ISO's Burned To One DVD?

Jun 4, 2011

May be out in left field here so bear with me . If i have two iso movie burns whose total gb data is 4.7 or under can both be burned to a single disk using K3b ? Not clear on whether to burn iso image in devede as two separate burns or combine as one iso image . If burned separately in devede don't see how to put both on same dvd when using K3b > video project . New to this so maybe "can't get there from here " .

View 1 Replies View Related

Red Hat / Fedora :: Burned Meida Not Working?

Mar 14, 2010

I am having problems reading burned media from my optical drives.I have a dvd rom and a dvd-rw I can burn media but after it's burned my drives do not read them, but if I use a different system it reads just fine.I have no issues with pressed cds though. I am a newbie at this so I have no idea what I did wrong.

View 3 Replies View Related

Ubuntu :: Delete An ISO Burned On To A Disc?

Jun 2, 2011

want to delete and ISO I've burned on to a disc. is there any software out there that will allow me to do this?

View 5 Replies View Related

OpenSUSE Hardware :: SuSE 11.2 Not Recognizing Mac Burned CD?

Sep 6, 2010

64 bit HP laptop, can recognize and play/read DVDs and audio CDs as well as burn DVD and CD. Yet it wont recognize a CD burned on a Mac.

View 5 Replies View Related

Ubuntu Installation :: Burned DVD Of Version 9 Not Recognized

Jul 11, 2010

I've been trying for days now to install Ubuntu on a Dell Dimension 5100 desktop. It's got a 2ghz processor, ATI graphics card and 512 ram. It has a DVD drive that it boots from. Here's the problem. I have Ubuntu 10 burned on a regular CD and I have Ubuntu 9.1 burned on a DVD. I can boot this Dell up using the CD. It goes through the regular install, gets to 23% then tells me that it can't recognize the CD/DVD device or the hard drive. I've re-seated cables, I know the hardware is all good, this is my media computer that Ive had attached to my TV now for a year. It was running fine 3 days ago before I got the great idea to convert it to Linux.

Now...once that fails I try to put in the burned DVD of version 9. Again the computer boots, I tell it to boot from the DVD...but this time the computer acts as if that drive doesn't even exist. It simply can't find the DVD drive anymore once I put a DVD into it. Is this a problem with the basic reading?? It'll read a CD but not a DVD. If I let it boot all the way to the live Ubuntu CD, the DVD drive is recognized just fine, reads DVDs, etc. Is there another solution, something I should be trying? I need this comp on Ubuntu. I've already converted all other systems in my house and this POS is the only abomination still using windows.

View 9 Replies View Related

Ubuntu Multimedia :: DVD ISO Plays, But Burned DVD Is Jerky?

Oct 15, 2010

I have an odd problem with a copied DVD. I started with a commercial DVD and created an ISO file. The ISO file plays perfectly with VLC. I take the ISO file and burn it to a DVD+RDL without error. The burned DVD will not properly play on my computer or DVD player. It loads, but the menu is jerky and full of video block artifacts. The menu does not function properly. I tried this more than once with different software, including going directly to the DVD. I am using a drive that worked before, with the same stack of DVD+Rs that I used before.

Here is where it gets interesting: I can take the non-working burned DVD and copy it to a new ISO file. The new ISO file works fine with VLC. Obviously the data is getting properly copied from the source DVD, and it must be good on the burned DVD, but it won't play properly.

View 3 Replies View Related

Ubuntu :: No Longer Read Files Burned While?

Nov 30, 2010

I burned these very important data files on the large DVD discs and now Ubuntu can no longer see them. It can only see the file folders but the files are still there. I took a bad screenshot with a camera but you can still see that the files are still there.

View 9 Replies View Related

Ubuntu Installation :: Checking Md5sum Of A Burned CD?

Dec 26, 2010

I checked the md5sum of the iso using winMd5Sum utility, it is OK.

To check the CD, right clicked the md5sum file in it, send to winmd5sum, and then copied the corresponding hash from the ubuntuhashes page into the bottom text box, and compared. The message box says md5 sums are different. Now the question is, have I done it correctly, I mean, is this the way to check a burned CD, OR, is there another way to check md5sum of a burned CD?

View 9 Replies View Related

Debian Multimedia :: K3b Burned Cdr Is Empty After Successful Burn?

Feb 14, 2011

I tried four cdrs and I can't get my dvd rom or dvd-rw to list the contents even though k3b says it was successful. If I open k3b it see the cdr and say sessions 1 appendable yes. I burned the cdr as multisession. I can only view the contents of the cdr by doing a continue multisession while in k3b. I'm using squeeze and kde.

View 4 Replies View Related

Fedora Installation :: 10 Install - Burned Dvds Would Not Boot

Jan 30, 2009

I'm trying to install fedora 10 via dvd without a lot of success. i'm doing this on an old hp 8765c computer. it has a sansung sd-612 dvd-rom player. the dvd's i burned would not boot. so, i checked the dvd. sha1sum. check verify dvd when burned. check boot on system where the dvd burned. check dvd verify when bootedc check ok, lets check the dvd player. From i can see on the web, this player had issues about not playing dvds. some relate to driver issue when upgrading me to xp. and, some refer to updating firmware. lots of post about the dvd player not playing dvds. None with a succinct solution.

Well, if anyone has a solution for updating the firmware for a samsung sd-623 dvd player, it would be helpful. For now, installing from the internal dvd player isn't going to work for hardware reasons. Plan B lets try installing from the dvd using a network attached dvd server. sing the net install cd. use linux askmethod, use url to point to the dvd. the image in retreived, select all the defautl options, format the drive, does the package selection, does the package dependencies, but errors on the retriving packages. puts up the download retry message. then show message about not being able to retreive the authcong-gkt... rpm. just let the net install go. i get to the nic configuration, it errors out. probably network manager issue about trying to set a static ip address.........

View 6 Replies View Related

Fedora Installation :: Evaluate The Checksum - Burned A CD With The Disc1.iso

Apr 1, 2010

I've downloaded the

Fedora-12-x86_64-disc1.iso
Fedora-12-x86_64-disc2.iso
Fedora-12-x86_64-disc3.iso
Fedora-12-x86_64-disc4.iso
Fedora-12-x86_64-disc5.iso

files. I then downloaded "Fedora-12-x86_64-CHECKSUM" and ran sha1sum.exe on my iso files and compared the results. They were wrong for all 5 iso files. Figuring there was a problem with the way I was trying to evaluate the checksum I burned a CD with the disc1.iso. I received a "INSERT A BOOT DISK" error from my machine. I then tried downloading the disc1.iso again and ran checksum on my newly downloaded file and get the same checksum on both the old and new disc1.iso files.

When I run:

I get the response:

It seems to me the checksum value should be:

What am I doing wrong? I've installed many different distros in the past and am pretty sure I burned the iso file not just copied it to the CD.

View 4 Replies View Related

General :: Permission Denied When Trying To Execute Binary Burned To A CD-R

Mar 23, 2010

On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso.The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message:bash: ./FPS1_1: Permission denied.I can open other files like text documents (the executable also comes with shared libraries).I realized I had burned the CD as root so I burned another one as another user but I still have the same problem.

View 2 Replies View Related

General :: Run A Script In Straight From CD Drive (CD Was Burned In Windows)

Jan 21, 2011

I have a self-extracting Bash installation script. I'd like to burn this to CD on my Windows box, drop that in a Linux box, and run the script straight off the CD drive.

Is there a way to add "+x" Permission on the Windows box when creating the CD?

I've been using the built in "writable folder"/"burn to disc" method, but think I have nero sitting around somewhere.

View 3 Replies View Related

Ubuntu :: Ownership & Permissions Change When Files Burned To DVD+RW?

Jan 18, 2010

After burning files to DVD+RW, the owner is changed to root, and all permissions are read only. I want to periodically open these files, update them, and save to the DVD again, but I no longer have permission and cannot change the permissions since I am no longer the owner. I tried sudo commands, but get responses "Read only file system". I have erased and reformatted the DVD and started over but get the same results.
I have Ubuntu 9.04, and have tried Brasero and Nautilus and get the same problem. Am I using the wrong kind of DVD/CD?

View 3 Replies View Related

Ubuntu :: Small Tool To Verify A Burned Disk?

Mar 10, 2010

I'm looking for a small terminal tool to verify a burned disc and compare it to an iso file.

I googled for verify burned disc/dvd - no mateches.

There is a thread, which tells how to do it in k3Burn - but I need it on terminal to use it with ssh.

View 6 Replies View Related

Ubuntu :: Burned Important Data To Disc- Unreadable?

Aug 16, 2011

I think it is a bug that has been reported already. https://bugs.launchpad.net/ubuntu/+s...ols/+bug/46966

Except I was using a cd instead. I was trying to install a different linux distro so I put all of my important documents on a disc. The disc shows it has contents before I try to open it but when I do the disc shows to be empty. I'm trying to open it in both windows 7 and linux ubuntu.I just need to get these documents back.

View 2 Replies View Related

Installation :: Burned Live C.d Of Debian 6 - No Option To Install

Feb 8, 2010

I burned a live c.d of debian 6 today, it works really great but there is no option to install it. I've done lots of installs off c.ds where it says " install" right at boot up, as on option. is there a way to install this?

View 3 Replies View Related

Ubuntu :: ISO Burned Cd Not HD Install - Blank - Doesn't Work

Aug 18, 2010

I have download Ubuntu 10.04 several times and burned on a number of different PC under Win XP with the same results. When using the Live Cd option it requests a login user name and password of which all I have tried do not work. This is a ISO burned to cd not a HD install. So. what is that password? blank blank does not work.

View 2 Replies View Related

CentOS 5 :: Burned Netinstall CD Caught In Endless Loop

Jan 5, 2010

I have burned the centos 5.4 i386 netinstall CD. It boots fine, but when I specify what mirror I want to use to install from, it gets caught in an endless loop. i have tried multiple mirrors and even tried both HTTP and FTP.
When I CTRL+F3 this is what I see:
"INFO: transferring [URL] to a fd"
ERROR: cannot determine address family of dist1.800hosting.com"
And then it just repeats over and over. I have looked at several mirros and I don't see that updates.img present at any of them.

View 3 Replies View Related

Fedora Hardware :: Optical Drives Not Reading Burned Media?

Mar 12, 2010

I am having problems reading burned media from my optical drives. I can burn media but after it's burned my drives do not read them, but if I use a different system it reads just fine.I am a newbie at this so I have no idea what I did wrong.

View 1 Replies View Related

Fedora Installation :: ISO Image Burned On CD - Dell 300SC Server

Jul 20, 2010

I have a Dell PowerEdge 300 SC that won't boot to the Fedora ISO image burned to the CD. I unpacked the .iso and the CD has the boot, isolinux and LiveOS folders visible. In the BIOS, I put the CD driver ahead of the hard drive in the boot sequence. It just doesn't see it. Is my hardware simply obsolete?

View 12 Replies View Related

Ubuntu Installation :: 10.04 Desktop Edition - Burned Disk Not Readable

Apr 30, 2010

So I downloaded the Ubuntu 10.04 Desktop Edition and burned it to a disk. Shut off my computer and restarted it, booting from the CD Drive. It couldn't find it. So I thought maybe there was an unrecorded write error so I burned it to a second disc. Well after burning it I noticed I can't even see the disc anymore. It doesn't seem to be recognized at all. That explains why it didn't boot from CD.

But what I want to know is why on earth is it basically going invisible and not working? I've never had a problem with burning discs, especially Ubuntu stuff... So why...? Well I just booted up the CD on a different computer and it seems to be working fine. So it appears that my computer simply has ceased to see bootable discs or maybe its just non-empty discs.

View 4 Replies View Related

Ubuntu Multimedia :: Data Verified Automatically After Being Burned To CD With Brasero?

Jul 31, 2011

I set up a data project to burn a bunch of files onto a CD. I want to backup the files. I went to edit > plugins and selected "File Checksum" and set it to SHA1. Will Brasero now automatically (as part of the burning process) calculate and then compare the SHA1 for the file on the HDD with the file that is burned to the CD? If the two SHA1 comparisons do not match then Brasero will kick up a dialog window alerting me? Do I understand how this works correctly? as long as the plugin is enabled this is all automatic? Is the "Image Checksum" plugin only in use when I am burning an ISO?

View 5 Replies View Related

OpenSUSE Hardware :: DVD Drive Will Not Read Burned Dual Layer Discs?

Feb 22, 2010

seen this or have suggestions on how to fix this. I can read the original disks but I cannot read the backup. The backup disc was burned on Window$ using Nero.I am trying to read the disc using both VLC and Totem but you can see in /var/log/messages there is an issue with reading the disc. This disc is readable in the Window$ box and on all DVD stand alone players.

Feb 21 20:17:09 delltop kernel: [40761.304725] sr 0:0:1:0: [sr0] Unhandled sense code
Feb 21 20:17:09 delltop kernel: [40761.304752] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE

[code]...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved