Hardware :: Best USB Based Ir Remote Control For A System HTPC?
Jan 11, 2010
I recently acquired one of the new Acer nettops to have an HTPC in my living room running XBMC - basically because my Gen1 Xbox just can�t handle HD and 264 encoded content.
It works great, upscaling being the best thing about the upgrade. But I don�t have a proper remote control to operate it with; I know that Logitech�s Harmony models are great, and are on my to check list... but I wanted some ideas from the community... What option(s) works best? (Specially keeping a budget)
View 1 Replies
ADVERTISEMENT
May 19, 2010
I'm looking for an open source web based version control system for our enterprise.To give you a quick picture of what we need I'll give you an example.
1.The customer send us some files for a new project (these will be the version 1.0)
2.We work on these files and make then available to the customer to let him verify that our changes are what he want. (These will be the version 2.0)
3.The customer accept.
4.We start the production.
View 2 Replies
View Related
Mar 8, 2011
I am looking to build a simple HTPC based on boxee, it is a very low power machine (2ghz P4, 1gb RAM, 1gb video card).
At present it has Win7 on it, but I want to run boxee as my media centre software (I love the watch later facility) and I was wondering what it would run best on?
If linux, what distro and why?
View 2 Replies
View Related
Apr 29, 2010
I'm looking for something like Logmein or showmypc.comv
View 9 Replies
View Related
Dec 19, 2008
Any of you have tested bluepad on kubuntu 8.04? I'm trying to control Linux from my mobile with bluedpad, but crashes with kde (suppose works with gnome?).
Else, can you tell me other programs?
View 1 Replies
View Related
Oct 17, 2010
Canon cameras used to come with a piece of software called remote capture for Windows and MacOS.
You plug in the camera via USB, and then the camera display is on your monitor. From there you can do everything your camera does, like taking pictures of video. Does anyone know if there is linux equivalent software that can do this?
I have found this software, but new cameras aren't supported.
[url]
I'm trying to make a stop motion movie.
View 1 Replies
View Related
Aug 20, 2010
I have configured squid proxy on centos 5.5 and some of my squid.conf file has following lines
Code:
http_access allow ncsa_users office
There are 3 users called "user034, user035 and user050" in the /etc/squid/squid_passwd file need to restricted access to internet except sites www.abc.com form anywhere in the lan. Once they logged in any ip, rule should apply.(that means no ip related acl, only user name related) How can I configure this in squid.
View 3 Replies
View Related
Jan 20, 2010
I've been using Linux on a more regular basis for the last two months now and have been able to find replacements for most of the software i use in Windows, or by using Wine. But i have one big problem that is keeping me from switching permanently to Linux. I frequently use remote control software to access and control my computers, both at home and to access my computers from remote places over the internet. I've been using NetOp, and more recently RealVNC. The client, or "viewer" part of RealVNC is working fine in both Windows and Linux. It's the host or server part that i can't get to work properly when it comes to VNC. The vnc.so module doesn't work on my system, x0vncserver program seems rather useless since it refuses to load before i have a network connection and this prevents me from start the program automatically as the wireless connection isn't ready and the vncserver command isn't an option since it doesn't display what i see on the actual screen. So, does anyone have a nice solution to this problem? Either to make VNC work or suggest some software that does. Anyway, it has to work on both Windows and Linux, in Linux it has to display the native x display, there must be built-in encryption and preferably be free or open-source software. I'm using Ubuntu 9.10.
View 5 Replies
View Related
Jun 30, 2011
To connect to a windows server. I used yum to doanload and install rdesktop. The application installed but there is no icon on my centos desktop.
View 5 Replies
View Related
Mar 4, 2011
Can someone highlight options available to take remote gui based session of ubuntu. Other then VNC, is there any other option ?I want to take gui based session of ubuntu from a windows machine
View 1 Replies
View Related
Apr 27, 2010
As for what I am trying to do: I am looking for a way to run scripts and/or launch programs from a cell phone using SMS. I've found a few options close to this, but nothing that really fits what I'm trying to do. It seems I can either get speed or ease of use, but not both. To explain:
If I understand correctly, Evolution has this functionality through email, but email isn't instant. I'm trying, as best as I can, to use my phone almost like a remote; sending email from my phone would create a considerable wait time.
Using Pidgin's Buddy Pounce feature with AIM lets me use SMS to get a quick response, but I'm running into the problem that I can't make its action depend on what the message says. I want to be able to text, say, "Shutdown", and have my computer run a shutdown command, but Pidgin's Buddy Pounce feature doesn't seem to support checking for specific messages. I've been unable to find a plugin that changes this; if there was, it'd probably be my best bet.
Bluetooth is out; my computer's bluetooth adapter died a long time ago. Additionally, some of the things I'd like to do would be when I'm not near the computer, so even if it was functional, it would be limiting.
Anything that requires any apps for android, iPhone, or w/e are out too. I have an LG Dare, and while it's a nice phone, you can basically forget custom apps.
So, to recap, I'm trying to find some way of sending an SMS or email from my phone, have it be received as quickly as possible, and have the computer run a console command based on the content of the SMS/email. Any ideas?
I'm running Ubuntu 10.04.
View 4 Replies
View Related
Dec 1, 2010
I recently installed 10.10 64-bit on my laptop. I have an older laptop with 9.10 32-bit on it. I installed vnc4viewer on the 9.10 laptop and started and set up remote desktop connections to let the remote user view and control the local desktop. I then tried Remote Desktop Viewer for the Applications menu on the 10.10 laptop and I can log in and see the remote desktop. When I try to do anything through the vnc viewer I can see my changes affect the serving machine but not the viewing machine. For instance, if I grab a window on the viewing machine and try to move it around the desktop, I can see it move on the serving machine. I guess the connection could just be very slow but it seems real time on the serving machine.
View 3 Replies
View Related
Jun 19, 2011
I'm wondering if it's possible to control a TTY on a remote machine via SSH. I'm aware of ssh's -t option, but it doesn't seem to do what I want. Basically, I'm thinking in terms of VNC-like operation, where the remote user and local user see the same thing, only instead of a GUI, they both see TTY1 (or 2, or etc). Is that doable, or no?
View 3 Replies
View Related
Jun 24, 2010
I have a Leadtek Winfast tv tuner and a pretty standard remote control. I've searched for tutorials and everything but i need something like a tutorial for dummies as i know nothing about configuring this kind of devices. I can already change channels in TVtime, but only numbers work from my remote control and the power button who shuts down my OS, so I guess you need something like lirc to configure all other remote control buttons. Anyway if some buttons already work maybe there's something installed in my OS which can be further customized but frankly I don't know where to find it, and even if i would how would I know to identify my remote control specific buttons ?
View 3 Replies
View Related
May 30, 2010
I'm trying to use the Banshee remote control application for Android, but there is no option for remote controls in the Banshee application I installed. I used to use Ubuntu and I'm pretty sure I remember it being there. Am I missing a package or something?
View 3 Replies
View Related
Feb 8, 2010
Does anyone have the Hauppauge HVR-1600 remote control working in Opensuse 11.1 or 11.2? It acts like it's not finding a firmware file or driver. I grabbed a .bin firmware file from one of the Mythtv sites, but I havn't gotten it to work yet. I put it in the /lib/firmware/KERNEL directory, but maybe I need to move it up one directory.Anyway, I was wondering if anyone else has it working and what was done? I have the other things in place regarding lirc, so I think the only thing holding it up is the device file.
View 1 Replies
View Related
Feb 15, 2010
I am trying to use my Apple Remote Controller that came with my iMac 4.1. I did some research and on the Ubuntu site it said that its possible with a application called Infrared Remote Controller. It detected from the hardrive which version I had etc but than a error message appeared on the bottom saying:
Warning: Remote control daemon not running.
How can I activate this? I included a screenshot!
View 1 Replies
View Related
Jul 30, 2011
First some background: I currently have iTunes running on a Vista box attached to my TV. I have an Ubuntu box running 11.04 and shairport which serves as remote speakers for the iTunes server. This works fairly well as I can control it with my iPhone, or iPad etc. Very slick interface and my wife loves it .
But I would prefer to not use iTunes to as the server. I would like to let that Vista box sleep most of the day. Doing a little bit of reading it sounds like I should be able to use mt-daapd as a replacement for iTunes. So I installed firefly and gave it a shot. I can get it streaming music fine. But I cannot Apple's "Remote" app to add the new library. When I did some poking I read that I should make a file that ends in ".remote" and put my device name + the pairing passcode from my iPhone in this file.
When I enter the "Add Library" mode on my iPhone it should broadcast an mDNS event. And in fact it looks like it does because: avahi-browse -r -k _touch-remote._tcp Can see my iPhone. But when I do a tail -f on the mt-daapd logfile I never see a connection come up. I have tried debug level 8 in the messaging.Still nothing. In my search for a fix I noticed mt-daapd is no longer being developed but there is forked-daapd. This is actually where I found the instructions for pairing via Remote.
Should I bail on mt-daapd? Will there someday be Ubuntu support for forked-daapd?
View 1 Replies
View Related
Sep 28, 2010
recommend a good remote control that i can use to control things like vlc, boxee, rhythmbox i have ubuntu 10.04
View 1 Replies
View Related
Feb 24, 2011
I'm using Debian Squeeze and my 0-9 remote control buttons and power off button work even if I've didn't installed lirc. In a Gnome desktop I could set up the volume too, but now as I'm using Fluxbox I can't start the volume control applet anymore (by the way does somebody knows any handy volume applet for Fluxbox ?)So my question is that if some button of my remote control already work without lirc, then there must by some drivers installed, when I've upgraded to a newer kernel, but I can't figure out what makes my remote control to work. Does anybody knows something about this and if there's something already installed for IR devices in newer kernels how can it be further configured ?
If i type the command "cat /dev/input/event6" in my terminal I can see that all my remote control buttons give a signal, but still I can't figure it out how can I set up all of them.
View 7 Replies
View Related
Oct 31, 2010
i have hp hdx-x16 1155ca laptop and my problem is that my remote control is not working on both of linux and windows so how can i distinguish the problem and solve it
View 3 Replies
View Related
Jul 11, 2009
Which SW package should I install , on my Windows Laptop, in order to view/control my Linux Desktop ? Is it good also for Windows to Windows? Who should be the server who the client ? I tried the xtightvnc on my Linux , it didn't work.
View 3 Replies
View Related
Feb 20, 2010
Can anybody recommend a good remote control to buy to use with mythtv?
View 3 Replies
View Related
May 27, 2010
I need to remotely control my parents' computers to tech support them.My parents use Windows (XP) while I use Linux (Sidux) intuitive application since this is my first attempt at this:
-free
-preferably thru browser
TeamViewer and LogMeIn turn up in my search. Seems like these two are the most popular. How do they stack up to each other?
View 5 Replies
View Related
Jun 16, 2010
I want to set up a home computer as server. I've installed Ubuntu Server Edition 10.04, and can access it through SSH. However, I would like to have a browser based interface for managing things, such as installing a phpBB forum and stuff like that. Also, I want my friends to be able to share files on my home server as well. I know I can do it by using FTP, but I would rather not have them to install a FTP program.
View 9 Replies
View Related
Aug 2, 2010
Is there a list of apps in ubuntu that can be controlled by a remote control?
View 1 Replies
View Related
Oct 12, 2010
I have an Ubuntu 10.10 running on a pc at work. On my Windows pc I can use a free utility called Teamviewer which you run on the pc (no install needed) and then you connect without any need to VPN into my work network.
So, what would be the best way to connect from home and remotely connect to my Ubuntu system at work?
View 5 Replies
View Related
Dec 21, 2010
I just built up an Acer Revo 3600 HTPC using Ubuntu. Right now I'm using a wireless keyboard and mouse but I'd like to get a remote control to interface with XBMC. There seem to be many remotes that work under windows but I am having a hard time finding a remote that works with Ubuntu. What are people using to control their Ubuntu-based HTPCs these days?
View 2 Replies
View Related
Feb 6, 2011
I have a StreamZap IR remote control and receiver.It is setup with LIRC and I use it with MythTV. Around a year ago some update caused Gnome to respond to a few of the remote's button presses.For example, using the volume buttons on my remote will have the same affect as using the volume buttons on my keyboard, or playing with the panel applet.It didn't do this before, and I liked it that way. But I see no way to disable Gnome's responses to my remote.I tried Googling to no avail.
View 3 Replies
View Related
Feb 15, 2011
I am running XBMC-standalone on a minimal Ubuntu installation and everything works as it should almost out of the box ... Now I would like to use my remote to navigate through ultrastardx which I start as an app(within XBMC).
I use linux-input-layer(devinput) with lirc(=necessary to make all buttons work).
So, if I start ultrastardx with the configuration from above my RC does not work at all but when I kill lircd before I start ultrastardx I ll get basic functions like Left, Right, Enter,... This is great but I miss two main functions Jumpto and search. To get them work and tremendously increasing the WAF I would need to send a key-sequence to ultrastardx.
What do I have to do to send such a sequence like "alt+j"?
Is there a way to kill lircd automatically before I start ultrastardy(at the moment I have to this manually )?
View 2 Replies
View Related
