I'm dual booting windows and linux. My dropbox folder is currently installed via windows. On linux, can I just symlink my dropbox folder to the windows version or something to that effect? I know I can do it, but is there a way to do this and still have the daemon running and syncing correctly?
View 2 Replies
I was wondering if anyone could point me in the direction of any howtos around this. I have 3 computers:
Desktop - Dendrite - Ubuntu 9.10
Laptop - Axon - Ubuntu 9.10
Netbook - Synapse - Eeebuntu 9.10
All with their own home drives. My media (music, films, photos etc) is kept on a separate (Vista) partition on my Desktop with symlinks from my home directory on Dendrite. Ideally, I'd have the /home directory synced across all 3 computers. I had been toying with the idea of a networked /home kept on an external HD plugged into synapse, but not sure how this would work out with Axon out of the reach of the network. I have dyndns set up and can access the home network over ssh, but obviously that's impractical (I assume) for a home drive.
Thoughts? Ideas? Pointers? I'm comfortable playing around with fstab, nfs and the terminal, but still very much a beginner.
I am about to work on getting the workstations on my network here to be connected to the Active Directory on my Windows 2003 server using Likewise Identity Service. of the security requirements is a good time sync, so I am trying to setup my Windows server time server on my CentOS machines. These machines dual boot Windows 7 and CentOS 5.5. I am using the Windows server as a time server and it's getting its time from its CMOS.llowing a microsoft kb article. I removed all the time servers from the CentOS box I am experimenting with and added the IP of my Windows server, it seems to connect ok but theime never gets updated.Oh, and this network has no connection to the internet it's cut off from the world, so sad and lonely and cannot get internet time
View 3 Replies View RelatedI use Debian Squeeze on my laptop, and in my office we have a WinXP box where we store all our documents and stuff. When I'm in the office, I can directly mount my directory to edit documents, and at home/wherever I can use VPN to connect to the box so it's no problem again.
However: I'd like to know if there is a way to set up a directory on my laptop, that I can use even when offline, and then when I'm connected to the office computer, it automatically syncs with it.
I've been successfully dualbooting OS-X and various debian based linux distros for a while now on my macbook pro. I use rEFIt. gptsync gives me the following error message:
[Code]...
Status: Analysis inconclusive, will not touch this disk. Is there any way to force the partition tables to sync? Currently, I have to use the OpenSUSE live DVD to boot into my OpenSUSE install.
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies View RelatedThe problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedI've been reading many threads on the ability to dual boot. I am not a "newbe" but have installed linux and Fedora many times, included starting from Windows 7 using EasyBCD. I wish to install Ubuntu Studio 64AMD on my PC:
CPU: AMD Phenom II x4 965
RAM: 8GB
HD: Hitachi HDT721064SLA360 SATA ~600GB C: 200GB & D: 200GB, Fedora: 100GB the remainder for Ubuntu.
My problem is that the installation instructions don't seem to talk about NOT installing grub on MBR as it was on the Fedora install. I don't want to accidentally overwrite my MBR. Is this option available? Will EasyBCD work with Ubuntu? No, I want Windows 7 left intact and do not want to dual boot from Grub!
I Would like to dual boot my computer for it to have suse linux and windows xp professional I have an 80 GB hard drive partitioned in NTFS is it possible to dual boot and what software do you suggest to partition the hard drive.
View 1 Replies View Relatedinstall on my machine with windows xp an Ubuntu 10.10 server without losing windows xp..I can't find some step-by-step procedure on how to set up a dual boot
View 10 Replies View RelatedI'm looking for a good partition scheme to install BT4 dual boot with windows 7, I've freed up about 160 G for my install and was going to use BT4 as an everyday distro and wanted enough space to install extra packages like vlc and what not as well as use wordlist.sh to create a substantial dictionary. These are my initial partitioning plans 3G /,6G usr, and about 3G swap with the rest being /home for word lists and whatnot would you mind sharing your partitioning setups so I can make this efficient as possible?
View 2 Replies View Relatedi do not get this i have a computer here that i installed ubuntu 10.04 on it side by side with windows using the ubuntu installer now windows will not boot at all it just restarts every time we try to boot into it now im not stupid i tryed reparing the os many times with the disk no luck when i was exploring in the windows cds command line it showed that his intire os was moved to the d:/
View 14 Replies View RelatedI dual boot windows and ubuntu on a particular machine and I'm looking for a comprehensive backup solution. Basically I'm after a single tool to clone the entire drive and do incremental backups with little to no concern for the underlying os.
My first instinct is to set up rsync to do the back up from ubuntu and just mount the windows partition when it does its thing so it backs that up too. Does that sound reasonable or am I missing something? At face value this seems like a reasonable answer, but I can't help but feel like something is "off" with that approach.
I have currently Windows 7 running and installed on partition C.I have partition D empty , and I would like to install Red Hat on it without affecting Windows seven ( i.e., dual boot Windows 7 & Red Hat6 ).
View 2 Replies View Relatedi installed windows 7 successfully. When I installed it,I created 40 gb of unallocated space in the hard disk for the Fedora installation. However, whenever i start the partition editor during the Fedora installation, it says that there is no free space in your hardware, even though it shows 40gb space in the disk partition table.
View 5 Replies View RelatedI've just installed Ubuntu 10.10 using Wubi inside of Windblows and I want to remove Windblows completely.What filestem does Ubuntu use and how do i delete the NTFS partitions and redistribute the free space once partition removed?I only installed through Windblows cos I couldn't get a decent cd burnt to install from there.Just noticed that it looks like the installer has locked up again becuase there is no mouse action. If it has locked up again, i think it may be the cd drive playing up. If i replace it temporarily with a newer drive will Ubunutu kick up a fuss when i out the old one back in. I don't intend using a cd-rom anyway. i just want to use it as a domain controller and file server.
View 3 Replies View RelatedI have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.
However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.
I have a heap of space undefined after this fourth primary partition.
However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.
As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:
1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)
2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)
3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)
4. Other?
Just installed Slackware 13.37 and am trying to get dual boot to work properly. I have edited /etc/lilo.conf to point the Windows section to what I believe should be the correct partition (/dev/sda2) Here is the relevant section
Code:
# LILO configuration file
# Windows bootable partition config begins
other = /dev/sda2
[code]....
I have mounted /dev/sda2 to /ntfs-c as suggested during install and when I browse through there I see the files from my windows setup so it is in fact the correct partition. When I load Windows on boot, however, it is pointing to the recovery partition (/dev/sda1).
linux and a good thing to start is to install centos in my pc together with windows xp. please help me on how to dual boot Centos 5.0 and Windows XP pro step by step.
View 2 Replies View RelatedI wanted to know the solution that if my linux crashes then can I recover my windows in adual boot env.
View 6 Replies View Relatedi have win7 already installed and working well on my hard drive and [FONT="Arial Black"]then i wanted to install ubunto 11 04 but i had a lot of problems .After several trials , I succeded at insalling ubunto (i had a message telling that installation was successfully done and asking me to reboot ) But after reboot I had no boot options . That is the boot went directly to win7 . Who can tell me how to fix this problem? If I don't find an adequate answer to my problem I will format the ubunto partition and give the free space to win7 (by the way I have given 50 giga space to ubunto )
View 4 Replies View RelatedI am planing to install fedora 13 on my dual boot (windows-7 + fedora) laptop. Previously some one helped me installing fedora on my laptop. Below let me mention the my file system architecture as the question is related to it. It's a 320 GB hard drive.
1. First 250 MB primary partition (used to be for /boot, which is currently unallocated, because in last installation I chose fedora to install automatically).
2. Next 120 GB windows primary partition.
3. Next 200 GB Logical partition
a. First 125 GB for windows backup
b. rest for Linux (500 MB + 60 GB).
As Linux was installed later thus it wrote the boot partition itself. I want the boot partition in the first 250 MB partition (reason, to be safe, I don't want to mess up with the master boot record while playing with Linux), also need to install fedora 13. The architecture I want is following:
1. first 250 MB: /boot
2. Next 120 GB: Windows
3. Logical:
a. First 125 GB: Windows backup.
b. Next 4 GB: /swap
c. Rest: /root -- I want to install Fedora here
So, what I plan to do is to whip out all the current Linux file systems and insert fedora dvd and install according to my criteria!
Now my questions are:
1. since currently Linux has the master boot record, will it cause any problem for the machine to boot up from installation dvd, if I whip off all the current Linux partitions? (Or in other words, does installation/ live-CD need a master boot record to boot? -- I am guessing once I reinstall Linux, booting is not a problem).
2. Once Linux is whipped off, can windows boot up automatically?
3. Is there any worry of messing up windows, specially its boot sector(off course I will take precaution not touching windows partitions!)
i recently attempted to dual boot windows 7 and ubuntu 10.10 on my toshiba satallite l50d5 laptop (which has had major problems booting/running ubuntu except for this latest release) anyways . i ran the live boot through a cd. saw that everything was running good and decided to dual boot . everything was fine until i got to the screen where it asked to put my name and password. it would not advance from there (it set trying to set up network time or something of that nature), i do not have internet access so im guessing that might have been a problem. anyways the installation wouldnt complete after HOURS so i decided to just turn off my computer. i booted it up again and windows loaded. i checked my windows drive and it was half of what it used to be (so the partioning worked i guess) but i cant get to my ubuntu partition. i see it when i go in through the live cd though but it doesnt give me the option to boot it when i turn it on normally. how do i get rid of the ubuntu partion or actualy allow it boot up?
View 1 Replies View RelatedI have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7)
Delete Windows /dev/sda3 70 GB although 40 GB are free
Create Extended /dev/sda2 140 GB
Create swap /dev/sda5 2 GB even though I have 4 GB RAM
Create Root /dev/sda6 20 GB ext4
Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
linux and windows dual boot.
Dell desktop (older)
openSUSE 11.2
Windows XP
Grub Bootloader
I had XP installed first then i installed openSUSE and configured for dual boot. What do I have to do to reinstall windows? Can i just do it like i normally would and just make sure it installs on the correct partition and doesn't do anything to the others. I don't want it to screw up the bootloader or something else.
I currently run a Windows 7 Compaq laptop with an Athlon x2 and 4gig of DDR2. I want to either set up a dual-boot on my laptop, or make Linux the Primary with Windows running in something like a virtual box. I am very much into Android and I want to learn Linux as a result of that. So which Distro should be considered in a situation like this.
View 6 Replies View RelatedI was having a dual-boot configuration, Ubuntu 10.10 and Windows 7 on the same disk. After resizing the windows 7 partition, after this screen [URL]... and after selecting windows 7 , I get "bootmgr is missing" message. Ubuntu loads normally. Here's my results.txt from boot info script:
[code]....
I just started working with Linux over the weekend. I do have a working dual booting system but it's not configured exactly how I want it to be. Currently Windows 7 Ultimate and Ubuntu are on the same hard drive but different partitions. The Windows boot screen comes up and I can select Windows or Ubuntu fine. Grub comes up when I select Ubuntu and I can successfully select any choice in the menu and it will run properly.
Everything works great now so you may wonder why I even want to keep tinkering, well, it's not working how I want it to. This is what I want it to do. I want Windows 7 on disk 0 and Ubuntu on disk 1. I want each OS to have it's own hard drive. I want Grub to be the only boot loader that comes up with the option to select Ubuntu or Windows. I want to skip the window's OS selection screen all together. I can modify Grub, I've already done some of that on my work computer.
I've been installing from windows. Should I use a CD instead? Would that accomplish my goals without doing anything special?
I have try to install fedora 11 with windows XP dual boot, but when fedora 11 is install, it will compeletly remove the already installed windows XP, while fedora 8, it works nice with windows XP, and is good dual boot OS at the same time.if any thing is new in fedora 11 or 12 with respect to dual booting,
View 2 Replies View Related
