General :: Webalizer A Specific Link / URL?
Feb 18, 2010
I have a question for you guys. How do I monitor a URL (link) in my server ? I want to see how many times a page has been accessed. In webalizer, there is such thing but there's a TOP 30 URL access, and I want to monitor (count) a specific URL. Is that possible ? If yes, how and what do I need to do.
They say:
Securing and Optimizing Linux: RedHat Edition -A Hands on Guide
PrevChapter 30. Optional component to install with ApacheNext
30.3. Configure the /etc/webalizer.conf file
The /etc/webalizer.conf is the default configuration file for Webalizer. With it, you can specify which directories or pages in your web site to analyze, which URLs to hide, and so on. By default, the Webalizer program will install a sample configuration file named webalizer.conf.sample under the /etc/ directory of Linux. You can use this file to configure your choices and then rename it webalizer.conf, and the Webalizer program will be able to find and use it. A lot of options exist and it's important to read the documentation that comes with Webalizer for more information on all of the different setting and parameters. Also, it's important to note that we comment in this Webalizer configuration file only the most common and used parameters.
[Code]...
But I don't get it, what should I type in order for the webalizer to monitor a specific URL.
View 5 Replies
ADVERTISEMENT
Jan 14, 2010
[root@xxx webalizer]# pwd
/var/www/html/webalizer
[root@xxx webalizer]#
[root@xxx webalizer]# ls -all
total 4924
drwxr-xr-x 2 tomcat tomcat 12288 Jan 1 04:03 .
drwxr-xr-x 16 tomcat tomcat 4096 Jan 14 10:01 ..
-rwxrwxrwx 1 tomcat tomcat 2606 Dec 1 2006 ctry_usage_200611.png
[Code]...
When I go to http://myserver/webalizer I only see the 2007 reports and I want to see all the years and months. How do I do that ?
View 13 Replies
View Related
Sep 14, 2010
I have been trying to configure webalizer on a centOS 5.5 system. I did the yum install and I found this helpful link...However when I try to change the dir it puts the info into, it keeps giveing me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results. /etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place)I go to my www page remote or on the local network I get page not found errors.In summary.1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?2. How do I display the www page to view the data?3. How can I secure the www page so only I can view the data.
View 4 Replies
View Related
Mar 3, 2010
Recently i am install webalizer in my application server .i am using centos4.1 .i installed successfully.but when i run the command i am getting like this.
root@tuxserver# /usr/bin/webalizer
Warning: Truncating oversized referrer field
Warning: Truncating oversized referrer field
[code]....
View 2 Replies
View Related
Jun 8, 2010
Whenever we insert CD,it creates a shortcut link in desktop.Can we list this link name by using any command? I am using Oracle Enterprise Linux 5.0.
View 10 Replies
View Related
Jun 20, 2011
I have searched around and am trying to understand the difference between a hard link and symbolic link (soft link). I found this link is quite useful. But I am still not very clear. I understand soft link is not a copy of original file, but is a hard link a copy or not?
View 4 Replies
View Related
Dec 2, 2010
for example
else {
for fileDOC in $location/*.doc
do
[code]...
View 12 Replies
View Related
Aug 2, 2010
I'm trying to get webalizer to analyse some log files. The server uses virtual hosts and has log rotations on and also uses turbopanel (now known as simple control panel). Because of this, the documentation is limited and webalizer works in a weird way. I found this perl script under turbopanel called webalizerrun.pl the code is as follows:
Code:
#!/usr/bin/perl
$WEBALIZER = "/usr/bin/webalizer";
chomp($var = shift);
$wdir = "$var/conf/webalizer";
opendir(DIR, $wdir) or die "Unable to read $wdir: $!";
[Code]...
Here's what I want to do, and I believe I can do this using this code with slight modifications. As of now, the log files for each site is in the folder specified above with the file named as "domain-name_access_log" and then the log rotation just adds a number to the end of that. I want use this perl script to run webalizer for a particular site and have its output be placed in directory.
1.) Line 4: chomp($var = shift): I know chomp is used to remove trailing characters, but what character in this case? How may I find that out? Also what does $var = shift do inside chomp?
2.) Line 8: What exactly does the readdir function do? What does it return to $domain?
The rest seems similar to csh, checks if it's dir or file and then changes to the directory and runs webalizer on that directory.
View 14 Replies
View Related
Feb 8, 2009
I have a dedicated server with fc-9. I have several domains. They are located in /home/domainname/html Under each /home/domainname I have added a webalizer.conf file. Recently I moved video files into a subdomain so I could track usage and generate reports on the use of these video files. Hence the main domain html files call the sub-domain to present flash files for viewing and .avi, .ogm, mp4, etc files for downloading.
So I have for directories:
/home/domain/html
/home/domain_files/html
I set up the domain_files as I have the main domain with access_log and error_log. I set up webalizer to analyze every day at midnight. What I get for webalizer results is links back to Sept, even though the logfile's first enter is in January. I also see many files in the report that are from a totally different domain. I have checked carefully and in webalizer.conf I have: LogFile /home/domain_files/access_log I'm lost. I haven't a clue what's wrong. If webalizer can't do this is there another simple logfile analyzer that can give me video usage?
View 1 Replies
View Related
Sep 14, 2010
I have been trying to configure webalizer on a centOS 5.5 system.I did the yum install and I found this helpful link...[URL]..However when I try to change the dir it puts the info into, it keeps giving me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results.
/etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/ When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place) I go to my www page remote or on the local network I get page not found errors. http://mysite.com/webalize or 192.168.1.80/webalizer page not found.
In summary.
1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?
2. How do I display the www page to view the data?
3. How can I secure the www page so only I can view the data.
just saw this in my email too :
header info deleted...
/etc/cron.daily/00webalizer:
Error: Can't change directory to /home/webalizer
/etc/cron.daily/logrotate:
Current logging target is:
`- SYSLOG
edit: i should also mention SeLinux is in permissive mode not enforcing while i am testing this.
View 2 Replies
View Related
Oct 21, 2010
I'm using Webmin, and Webalizer plugin. Days ago, webalizer works fine. But starting from yesterday, Webalizer no longer generate reports. And when I try to generate report manually using webmin, I get this message: Code: Running Webalizer to generate report from [URL]..
.. Webalizer failed! See the output above for details. Because I didn't get any details on that message, I run webalizer manually using command:
Code: # webalizer -n mydomain.com And as result, I got this message:
Code: # webalizer -n mydomain.com Error: Unable to restore run data (10) I have few domains in this machine, and for all domains I got the same result. Anyone has any idea(s) about what happened and how to cure it? Few days ago I think I tried to install Perl-Small-XML using CPAN and failed. And I installed awstats too. Don't know whether it's related or not.
View 1 Replies
View Related
Jun 16, 2010
how to install webalizer and configure it to push stats for multiple domains?
View 6 Replies
View Related
May 18, 2010
I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
View 12 Replies
View Related
Apr 28, 2010
i only need localhost for testing some phpnow i get[Wed Apr 28 18:44:57 2010] [error] [client ::1] Symbolic link not allowed or link target not accessible: /srv/www/htdocs
View 9 Replies
View Related
Sep 6, 2010
In the ordering of files I keep I need links to directories. Sometimes I even need to move directories to new locations. I have tried using symlinks, but they become dead when I move the directory they point to. I have tried hard links, but I haven't found any Linux file system that would support hard linked directories. How can I achieve that a complex structure of directories (currently with symlinks for directories and hard links for files) keep symlinks live when directories are moved?
- is there any utility that updates symlinks when a directory is moved?
- is there any Linux filesystem that supports hard linked directories?
- is there any good Linux interface to the new NTFS (the only file system I know to support automatically updating directory links, called directory junctions)?
View 9 Replies
View Related
Aug 16, 2011
I was looking for live link to download ubuntu mobile but unfortunately I don't find anything... Can someone send me a link for download and a link with the installation instructions ?? All the links that I found are dead.
View 9 Replies
View Related
Sep 8, 2010
how can we create soft link and hard link in RHEL5 when am using in command it is giving format error
View 6 Replies
View Related
Apr 26, 2010
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
View 3 Replies
View Related
Jun 8, 2010
How do I give permission to a logged in user to stop/start a specific service without entering a root/sudo password? So they can do a simple "service SomeService stop|start" It is for a headless Ubuntu server.
View 5 Replies
View Related
Jul 24, 2010
I need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
View 5 Replies
View Related
Jun 9, 2010
my system I want user1 and only user1 to be able to mount and unmount a specific partition, this partition contains backups and is usually mounted read only, needs to be temporarily mounted read/write by user1 while doing the backup.user1 is an unprivileged user. I've read that the user option will let any user mount the file-system (and only that user can then subsequently unmount it) and that the users option allows any user to mount or unmount the file-system.I also found this in mount's man pageQuote:The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the restriction that the user must be member of the group of the special file.So it looks like I'd need a login script for that user to make the user owner of the device file (/dev/voiceserv/backup in this case)
View 7 Replies
View Related
Oct 1, 2009
I'm trying to configure our mail server to block email from a specific sender reaching a specific recipient. In other words, if one of our employees is getting harassed by a 'stalker', how would one go about blocking, at the MTA (Sendmail) level, a specific sender email address from reaching a particular users inbox? We do not want to capture the email - simply block it before it consumes server resources.The Sendmail server (MTA) is a front end to our Exchange server so no user accounts exist on the Linux server. We simply use it as a SPAM and Virus scanner then forward clean email to the Exchange server.
View 6 Replies
View Related
Jul 19, 2010
I want to replace specific character in a file after every specific line. example as follows.
O 000000000000000000
A 111111111111111111
C 222222222222222222
[code]...
View 2 Replies
View Related
Jun 2, 2010
There is a symlink from /var/www to a personal directory. FollowSymlink and chmod 755 are all set. It works perfectly until each morning I will get a "Symbolic link not allowed or link target not accessible" error. When I do a "sudo service apache2 restart", the problem will go away.
View 1 Replies
View Related
Oct 25, 2010
I installed 10.10 using wubi (Host system is Win XP). I want to create a symbolic link of a file on the host system (Windows c:abc.doc file) in my Ubuntu home ~/ directory.
When I type command ln /host/abc.doc abc.doc It gives me following error ln: creating hard link `abc.doc' => `/host/abc.doc': Invalid cross-device link
View 1 Replies
View Related
Jul 1, 2009
I configure squid to work with squidGuard , and all thing work properly , but there is problemfirst look to this squidGuard.confdhhome /usr/local/squidGuard/dblogdir /usr/local/squidGuard/log
src blacklist {
ip 10.0.0.5
}
[code]...
View 1 Replies
View Related
May 25, 2011
There are basically two main limitations with hard links:
Hard links normally require that the link and the file reside in the same file system. Only the superuser can create a hard link to a directory.
Thus, symbolic links were introduced to get around the limitations of hard links. So, the question is, are hard links still needed? Might there be situation where they are more useful?
View 5 Replies
View Related
Oct 1, 2010
Ubuntu 10.04 64-bit
Partition on HD
/root
/home
[code]....
View 1 Replies
View Related
Jun 10, 2010
i have installed squid 2.6 on my centos. i have writen a shell script to ping a network and write to a file. write '1' if network up and '0' if network down. After that,a perl script will read the file and do the redirection.Perl will redirect to a fix URL [URL] if the network down and do nothing when it up. i have put my perl script in squid.conf at url_rewrite_program /my_file_path.
below is my shell script for pinging:
Quote:
#!/bin/bash
while [ 1 ]
do
HOST=143.148.137.134
[code]....
My problem is client browser are not redirect to www.google.com even the network is down. It should go to the fix URL when the user click any URL in network down situation.it just appear cannot resolve host.
View 1 Replies
View Related
Oct 6, 2010
Please can some one help me to use my USB wireless card D-Link on my laptop.i want to configure it, I am using madriva 2010 my system Acer Aspire 4315.i want to know how to configure it and where to get special driver to download the driver.
View 2 Replies
View Related