General :: /usr/bin/xterm: Could Not Exec /bin/bash: Permission Denied
Sep 24, 2010
I'm in trouble when I log in the fedora as a normal user(not root) today. When I fill the username and the password press enter key. Then pop up a little window locate at top left corner. And have one line message : "/usr/bin/xterm : Could not exec /bin/bash : Permission Denied" Then I log in as root, it's ok. And when I open shell and type "su username" then the console print "su: /bin/bash: Permission denied" I have checked the perms of "/bin/bash" , it's 755. And I have tried all things which suggested from articles searched through Google. like change / or /root and other directory's permissions but failed.
Code:
[root@localhost lib]# ldd /bin/bash
linux-gate.so.1 => (0x00687000)
libtinfo.so.5 => /lib/libtinfo.so.5 (0x05846000)
[code]....
View 2 Replies
ADVERTISEMENT
Sep 24, 2010
trouble when I log in the fedora as a normal user(not root) today. When I fill the username and the password press enter key. Then pop up a little window locate at topleft corner. And have one line message : "/usr/bin/xterm : Could not exec /bin/bash : Permission Denied"hen I log in as root, it's ok. And when I open shell and type "su username" then the console print "su: /bin/bash: Permission denied"I have checked the perms of "/bin/bash" , it's 755. And I have tried all things which suggested from articles searched through Google. like change / or /root and other directory's permissions but failed
View 4 Replies
View Related
Sep 10, 2010
If I run this as su I get the same thing. If I log on as root user It is the same as well
View 5 Replies
View Related
Aug 24, 2010
[root@mail tmp]# ./PE1650_RAID_FRMW_LX_R168387.BIN-bash: ./PE1650_RAID_FRMW_LX_R168387.BIN: Permission deniedalso get it when trying to run[root@mail tmp]# ./ESM_FRMW_LX_A37_R117418.BIN-bash: ./ESM_FRMW_LX_A37_R117418.BIN: Permission denied
View 2 Replies
View Related
Dec 16, 2009
Firstly, i'm NEW to Linux and my very first time with DSL. I'm installing this on an older Dell Latitude laptop.
I just finally got the DSL installed on my HDD successfully and then I added feh to start and run at start up, then I rebooted and now i'm getting this error:
No, directory, logging in with HOME=/ -bash: cd: /home/dsl: Permission denied
I have tried reading numerous websites but none explains to the level whereby I can understand. I even tried rebooting from the CD, but could not figure out how/what to do next?
The question is, can someone explain how I can use the DSL CD to try to correct this error. More importantly, can you explain in layman terms so that I can actually put it good use.
Also, some additional questions I have....when you download a file where does it save to?
View 6 Replies
View Related
Sep 9, 2011
I have tried changing permissions and I have looked for a solution, but the error still exists.In fact it gives me a different error every time I log in.
Could not chdir to home directory /home/rb27: Permission denied
here is a snippet of what I get when I use the command ls -al:
drwxr-xr-x 16 root root 0 Sep 8 18:28 .
drwxr-xr-x 23 root root 4096 Feb 5 2011 ..
d????????? ? ? ? ? ? ajd74
d????????? ? ? ? ? ? ban45
d????????? ? ? ? ? ? rb27
I cannot log in as root since the permission is denied
View 1 Replies
View Related
Mar 27, 2010
I tried to execute the following command: $ ./eval_online_wiki.ml -db_user aa -db_pass bb -db_name cc It returned as follows: bash: ./eval_online_wiki.ml: Permission denied What does this mean? How to solve the problem? Actually, I was following a README, and it says "$ ./eval_online_wiki -db_user <username> -db_pass <pwd> -db_name <db_name>"
View 2 Replies
View Related
Jan 2, 2009
I'm trying to run a backup using CPIO to an LTO2 tape in an HP Ultrium 460 drive using the following:find / -path /proc -prune -o -print | cpio -o -H crc --block-size=128 > /dev/st0Each time I get the error:-bash: /dev/st0: Permission deniedThis is regardless of whether I sudo the two sides of the command or not. I have used dd if=/dev/st0 of=/tmp/test.file ibs=128k count=1 to verify the blocksize (and since I was a little confused about block-size in cpio I also tried --block-size=256)
View 5 Replies
View Related
Aug 10, 2010
I've been using Digikam and it's a huge blow to my system memory. Even after quitting I still feel my computer to be slightly slower. I tried running the commands from [URL] but I get this instead
bash: /proc/sys/vm/drop_caches: Permission denied
View 4 Replies
View Related
Jul 20, 2011
I am writing a bash script to run everyday and output results to a file. When the same results are produced i want to overwrite the line from the previous day. (Or remove and add). So if the script finds a variable in a line. i want it to output the results to that line . sed -i did not work for me; sed: couldn't open temporary file ./sedTvOCEg: Permission denied
View 10 Replies
View Related
Nov 5, 2009
I have tried to mount Sda on my laptop HP dv6 and I have got this problem [root@cpe-74-71-125-175 ~]# /dev/sda1 /mymount/win ntfs-3g rw,umask=0000,defaults 0 0 bash: /dev/sda1: Permission denied
View 3 Replies
View Related
Mar 23, 2011
The root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:
drwxrwsrwx ....... file_name
However the owner of the file can still read/write this file.
AND:
0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:
uid=0(root) gid=0(root) groups=0(root)
so I don't think it's the problem of group.
View 2 Replies
View Related
May 17, 2011
I'm hoping someone can help me out with this issue I'm having using acl(s). I have a user I want to grant access to logs I have stored on my server. I am doing this by setting up an acl to that directory where the logs are stored. My settings seem to look fine, however I cannot read or even reach the directory with the said user; we'll call him "userP".
Here is my code:
To ensure userP has access to the parent directory (jboss) code...
Not sure what I'm doing wrong here: there are no errors in the logs; just "Permission denied" however I try to get to the directory.
Does anyone know what I'm doing wrong?
View 4 Replies
View Related
Oct 19, 2010
On the current machine:> su - username (it works)> ssh username@localhost (doesn't work)
What could be the problem?
View 6 Replies
View Related
Aug 21, 2010
Since lucid was installed, I can no longer access my floppy drive. I try creating an image on it and this happens:
$ dd if=a.img of=/dev/fd0
$ dd: opening `/dev/fd0': Permission denied
How do I get permission to do this? I'm the only user and am an administrator.
View 2 Replies
View Related
Nov 5, 2010
I am installing Oracle 11g on Oracle Enterprise Linux 5.0 32 bit (virtual machine)i did all the mandatory steps, i am trying to run the installer but i am facing the below:bash: ./runInstaller: /bin/sh: bad interpreter: Permission deniedknowing that the run isntaller is found in an iso file, in which i linked the VMwarre CD/DVD drive to it
View 4 Replies
View Related
Apr 5, 2010
i am trying to make my SSH-server more secure on my unbuntu server. And i want to do a little modifiing to the /etc/ssh/sshd_config folder. When i try to accsess it is says permission denied if i do sudo /etc/ssh/sshd_config it says command not found.
View 3 Replies
View Related
Jul 10, 2010
I'm using the find command in a PHP script like this to update permissions on all files but not directories:
<?php
// whole bunch of code
exec("find /var/www/vhosts/mydomain.com/httpdocs/path/to/some/directory -type f -exec chmod -R 440 {} ;");
[code]....
View 1 Replies
View Related
Oct 4, 2010
After I type sshd: 192.168.1.11 : allow and
sshd : ALL : Deny
I can't access hosts.allow or deny any more.
It says "Permission denied"
Before I typed that, I can access hosts.allow and deny.
By the way, I was wondering what command to edit hosts.allow.
For example, I want to put sshd: xxx.xxx.xxx.xxx : allow in that file.
View 14 Replies
View Related
Dec 8, 2010
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
View 1 Replies
View Related
May 10, 2010
I am not sure if this is posted somewhere else, if it is sorry. Anyways I downloaded files to my desktop from firefox and i need them to be in usr/local file, but if i try to put it in there it tells me permission denied. Is there anyway around this?
View 5 Replies
View Related
Mar 27, 2011
I tried writing zreos to my HD but it denied permission. How do I get around that ?
View 6 Replies
View Related
Oct 22, 2010
I have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
View 4 Replies
View Related
Sep 16, 2009
When I create a folder in the system, it's created successfully
Code:
[test@localhost localhost ]$ cd test/
-bash: cd: test/: Permission denied
drw-rw-r-- 2 test testinstall 4.0K Sep 16 18:51 test
View 5 Replies
View Related
Jan 27, 2010
I write following script.
#!/bin/bash
TEST=$(ifconfig | grep "ppp")
if [ -z "$TEST" ]
[code]....
View 8 Replies
View Related
Oct 5, 2009
I have some files lying around in /root/bla/, all these files are 644 and /root/bla/ is 755. Still, when I try (as a different user) to cp /root/bla/file ., I get a "cp: cannot stat: Permission denied". I also cannot ls /root/bla/, I also get a Permission denied... what gives?
View 3 Replies
View Related
Jan 6, 2011
I am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2
service tftp {
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
#disable = yes
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
And permissions on /tftpboot are 777
[root@LinuxServer /]# ls -ld /tftpboot/
drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/
[root@LinuxServer /]# ls -l /tftpboot/
total 16
-rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test
-rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is :
[root@LinuxServer /]# tftp localhost -c put new_test
Error code 0: Permission denied
And ya here is /etc/sysconfig/selinux file is as under :
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=permissive
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
View 3 Replies
View Related
Apr 19, 2011
i've query regarding, user creation in Linux( RHEL 5), i.e, i've created a user ([root@localhost ~]#useradd slash ) and switched into that user, but am not able to run commands in it......It's displaying a message saying, PERMISSION DENIED. Do we need to provide any permissions while creating a user
View 7 Replies
View Related
Mar 23, 2010
On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso.The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message:bash: ./FPS1_1: Permission denied.I can open other files like text documents (the executable also comes with shared libraries).I realized I had burned the CD as root so I burned another one as another user but I still have the same problem.
View 2 Replies
View Related
May 1, 2011
I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
View 1 Replies
View Related
