General :: Test An Rpm By Doing A Yum Install?
Jun 16, 2010
I am trying to test an rpm by doing a yum install. It should not install and report a dependency conflict as there is deliberately another package installed it should conflict with but it is installing over the existing package. When I do this via an rpm -i it correctly does not install.
Detail below -
The SPEC file has the conflicts below
Conflicts: test_DEV = 1-0, test_UAT = 1-0, test_PRD = 1-0
If test_DEV is already installed for 1-0 and I try and install 1-1 via rpm is correctly conflicts -
rpm -qa | grep -i test
test_DEV-1-0
rpm -i test_DEV-1-1.noarch.rpm
error: Failed dependencies:
test_DEV = 1-0 conflicts with test_DEV-1-1.noarch
Yet when I install both via yum it allows me to install 1-1 over 1-0 which I don't want.
View 1 Replies
ADVERTISEMENT
Mar 26, 2011
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies
View Related
Dec 6, 2010
If you do, after the completing the test - it will eject the CD.
and how are you going to reinsert the CD to complete your install? you're remote remember ??
View 2 Replies
View Related
Jan 27, 2011
how to install, configure and test Sendmail in Redhat Linux. I don't have yum installed on my system, so I cannot use yum install sendmail command.
View 3 Replies
View Related
Apr 8, 2009
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
View 1 Replies
View Related
Mar 15, 2010
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
View 1 Replies
View Related
Jun 17, 2011
I just installed 11.4 via the net install cd. In the configuration step, the internet connection test fails. Why would this happen if I just installed opensuse using the internet? It looks to me as if opensuse can already figure out how to use my network card. I went ahead and skipped the test, but it still doesn't make any sense to me. Let's see if internet works once I'm logged in...
View 2 Replies
View Related
Dec 20, 2009
I've been trying to install VSFTP on a test box I have at home. Here are the steps that I've done so far: First, I install vsftpd via yum. yum install vsftpd
View 4 Replies
View Related
Dec 10, 2010
I've followed leigh's installation instructions for the nVidia drivers on Fedora 14, and everything seemed to go smoothly, but I don't see any obvious changes after rebooting (should I?).When I go to KDE's KInfocenter (KMenu -> Applications -> System -> Info Center) and check the driver information I see this:
Code:
Vendor Mesa Project
Renderer Software Rasterizer
[code]....
View 2 Replies
View Related
Nov 29, 2009
After installing 64 bit 11.2 with no apparent problems: computer hangs up on desktop boot opensuse 11.2-2.6.31.5-0.1, however I can boot from failsafe opensuse 11.2-2.6.31.5-0.1. I had problems trying to install Ubuntu so I checked out the opensuse. I do not know if this is an easy fix! I decided to avoid buying anymore windows system software. I ran memory test with no problems. The firmware test reported 4 errors. I have windows XP installed on other hard drive - no problems there.
View 5 Replies
View Related
Jul 12, 2010
From the start-up manual I know the Firmware Test Starts a BIOS checker that validates ACPI and other parts of your BIOS. I noticed there are 3 failures in the result. (The font size on the screen is too small for me to read.) I got stuck in trying to save to either of the two choices provided with names I don't understand. I had to use the three-finger salute to bail me out.
View 4 Replies
View Related
Feb 21, 2011
I have set up a local server running 10.04. I have cups installed and running. I can access the server via 192.168.28.200:631 webapoge. I can print test pages from that site. But when I try installing the networked printer on a client, the printer will install but I can't get the test page to print.
View 1 Replies
View Related
Aug 10, 2011
I'd like to install a JAR player in order to test JAR files before installing into my cell (a SonyEricsson w150a, a.k.a. Yizo). Ubuntu 10.10 Maverick.
View 7 Replies
View Related
Jan 13, 2010
I have tried to install this package with yum and also directly - download the rpm, then rpm -Uvh ....
Both yum and rpm hang - yum when running the transaction test.
Any ideas about this package.
This is running F12, uname -r => 2.6.31.9-174.fc12.i686
View 1 Replies
View Related
Oct 2, 2010
I am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out "ERROR: Message not sent.
View 5 Replies
View Related
Jan 29, 2010
i have a problem when i use test drive, it doesn't boot into the operating system. it just look like in dos when i login. what is wrong? shouldn't test drive let me see how its look when i use the live CD?
View 9 Replies
View Related
Oct 1, 2010
At some point, the install process asks whether to test internet access. I replied Yes, and the test failed. Retries also failed, leading me to conclude, mistakenly, that the ethernet card was not supported by SuSE 11.2. Finally I elected to skip the test, resigned to the loss of internet access. The install program then proceeded to access online repositories without difficulty, and I had no further difficulty accessing the internet. So why the misleading test result?
View 3 Replies
View Related
Mar 11, 2011
For use on a test LAN, ie. security is not an issue, I need to install the most basic FTP server available just so we can share files back and forth between test hosts : launch FTPd, have it share a directory through either "anonymous" or a single, shared login/password?
View 8 Replies
View Related
Jun 25, 2010
What is the best way to test a distro? As a newbie, I am trying out several different distro's. I run them from a live CD and see if they are easy for me to set up my wireless, can be configured to multiple monitors, corectly recognize my hardware. I then connect to the internte and see if it plays videos or needs codecs downloaded, then connect to the reository and download any needed codecs, or pick a random program and see how easy it is to download and install.
Is this a reasonable way to check out a distro, or should I be looking at something else? Keep in mind, I am a newbie who is a user, not a hacker, and know nothing of the commandline yet.
View 3 Replies
View Related
May 30, 2011
I want to test something with my JMX console. I need to use the twiddle.sh script (because of a plugin).But when i execute this:
Code:
/opt/jboss-5.1.0.GA/bin/twiddle.sh -s localhost get jboss.system:type=ServerInfo ActiveThreadCount
i get this error:
Code:
Exception in thread "main" java.lang.NoClassDefFoundError: while resolving class: org.jboss.console.twiddle.Twiddle
[Code]...
View 1 Replies
View Related
Oct 27, 2010
how to test the AES Encryption in the openSuSE 11.3
View 1 Replies
View Related
Aug 11, 2011
I am trying to set up a web page for the business and we have had the website or domain for a while but no one has put anything on it. I have never done anything like this before so i typed in the website and got the apache test page saying that i should add this: /var/www/html/
1) i'm not really sure what to add it to
2) i've tried adding it to the website url and that comes up with invalid page
3) could someone please explain in simple terms how i can get on to the webpage so i can start adding content to it?
View 1 Replies
View Related
Mar 25, 2011
I found that this tests if a give filename is a directory or not:
Code:
-d "$FILENAME"
But what test for not a directory? I tried
Code:
-D "$FILENAME"
But this doesnt work?
View 1 Replies
View Related
Jul 7, 2011
is there anyway i can speedtest.net with ssh access into my server ?
View 3 Replies
View Related
Feb 21, 2010
I was looking at this line in an init file:
Code:
test -f /etc/default/postfix && . /etc/default/postfix
Which I understand to mean test that files /etc/default/postfix AND etc/default/postfix exist. Two things
[code]....
View 2 Replies
View Related
Jun 20, 2010
Bought computer 11 months ago, immediately there were problems. What would happen is, when I logged in after a long period of shut down, the system would BSOD. Then I would restart and everything would be fine, until the next time I shut down for a long time (8ish hours) and got back on. I sent the laptop in (a couple times) and they eventually replaced the RAM and the BSODs went away. This is all on Windows 7 (well started on Vista, switched to Windows 7).
I recently set up a dual boot with Windows 7 and Ubuntu 10.04. I'm experiencing crashes on Ubuntu (the whole system just freezes, can't operate mouse, keyboard, or anything) and the behavior is similar. When I log on after a long period of shut down, the system will crash, but if I restart (actually I have to wait 10 minutes before I restart, if I restart immediately it will crash again) then it is fine, until the next period of long shutdown.
So I'm thinking it's bad RAM, so I downloaded Memtest and am testing each of my sticks (they are each 2GB) individually in the same connector thing (don't know what it is called, whatever the sticks attach to). The test for the first one passed with flying colors. However, the second one is having problems. On test #2, the memtest repeats itself, continuously looping through 0-32767 errors on the right side.
My laptop is an Asus G50VT
The 2 most interesting lines...
Highest Error Address: 000fffffffc - 4095.9 MB // does this make sense? 4095.9 MB on a 2GB stick?
Test 2: 32767 // the 32767 loops back around to 0 and repeats
View 1 Replies
View Related
Nov 28, 2010
I have fifteen Audio CDs - an Audiobook - that I haven't used in ages.
I would like to pass them on, but before doing that, I want to check whether they still work flawlessly.
Is there a Windows or Linux program that I can use to quality test a CD? Is possible, with a detailed explanation of any errors it may find, and whether they will cause problems listening to the CD?
View 1 Replies
View Related
Dec 7, 2010
I was trying to run the testusb test application in my Ubuntu pc. I have plugged a USB stick into my PC. and ran "testusb -a". But it says like "no test devices recognized". Here is my /proc/bus/usb/devices
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
[Code].....
View 4 Replies
View Related
Apr 9, 2010
I've recently been experimenting with glxgears, but found people saying this is not an ideal benchmark tool as there are many variants; for example resizing the window affects the FPS tremendously.
I'm interested in testing the difference between using the proprietary ATI driver and the open source driver and also the performance under various distributions.
What's the best software to benchmark graphics cards?
View 4 Replies
View Related
Feb 17, 2011
I have a four-cores machine (core1,core2, core3, core4 ). I want to test the communication or latency between two cores (for example, core1 and core2; core3 and core4). Does anyone know how to write a code to test it under linux operating system?
View 1 Replies
View Related
