The commanddcdldapsearch -x -h localhost -b "ou=defaultgroup,ou=mailboxes,ou=dc-mailbox,o=mailserver"works fine and produces the expected results
However the command
dcdldapsearch -x -h localhost -b "ou=provisioning adminstrators,ou=dc-mailbox,o=mailserver"
[code]....
How would the command for recursive search in LDAP look like when I'm searching for "cn" or "ou"?
View 3 Replies View RelatedI've compiled openssh-5.4p1 on RHEL 4.8 with Openssl 0.9.8m + pam It works perfect without pam (pam-0.77-66), both with password and public key auth. Whith pam enabled and LDAP (openldap-2.4.21, from scratch) something strange happens: system users: I can do ssh with both password and public key LDAP users: public key works for remote users, still I cannot do ssh with just password. I'm trying a custom PAM configuration, because the default one (even with authconfig + LDAP ) blocks ssh even with system users.
My pam SSHD configuration is:
#%PAM-1.0
auth required pam_env.so
auth sufficient pam_unix.so likeauth nullok
auth sufficient pam_ldap.so use_first_pass
[code]....
My LDAP users are ok: i can do "su - " remote LDAP (so that nss_ldap is OK), also getent passwd and getent group is ok.
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
I am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies View RelatedI have a list of files in a directory which starts with - or have space.
I need to copy them back without the space or -?
linux1[sim]% ls linux1[sim]% cp ./-* ./*
i have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
I took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.
The firewall is open for ldap.
I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).
However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.
It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.
i have successful secure ldap replication but i could not make ldap client to direct its authentication to slave ldap
here is my config file on ldap client (i am not sure if it is the right place though)
ip : 192.168.1.183 is master ldap
ip : 192.168.1.185 is slave ldap
pico /etc/ldap/ldap.conf
#
# LDAP Defaults
code....
I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:
# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3
[code]....
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
In a 32-bit system, max memory addressable is 4GB. Now Linux kernel does memory mapping division of 1GB for kernel address space and 3GB for user address space. That means 4GB of virtual address space is divided between kernel (1GB) and user (3GB).
Q1. All virtual mapping utilizes the available physical RAM without any division? I mean to say that if RAM is 512MB then a page in kernel space can lie any where RAM (leave aside old PCI dma accesses)? (How this fits to fact that kernel memory is non-pageble)
Q2. If a process is created in user space, it has visibility 4GB address space or 3GB address space?
My system is dual boot with win7 and ubuntu. I have free space of around 10 gb. I want to add this free space to my ubuntu drive. How can i do that?
View 4 Replies View RelatedI'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
I'm checking with a sniffer and there's activity going on between the client and the LDAP server... as a matter of fact, the sniffer shows that the search is producing one ldap item, however, php says it can't contact the ldap server (after it has bound and everything):
The script is working beautifully on another host with debian.
why i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db
[Code]...
I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.
Relevant sssd.conf:
[domain/default]
auth_provider = ldap
cache_credentials = True
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
i guess this is an installation issue as i am newish to Linux and got a F14 laptop from a used/refurb store... Anyway it seem i have difficulty with getting GTK running or maybe it is WGET...?
i did manage to install apt-get and was able to run synaptics ... but now whenever i try to run synaptics it flashes the interface and crashes. i tried apt-get search wget and it says invalid operation search. i tried apt cache wget and get a crash box in the upper right corner... i tried apt-get gtk+extra-2.1.2-4.fc14 and it says invalid operation gtk...
All of which is frustrating my attempts to get the GTK interface to J working. Their script uses WGET which i also cannot get.
I have 160gb laptop. i installed vista in c primary partition which is 25gb and installed ubuntu in d primary partition which is 20gb. A remainig for my data. Now i tried to install CENT OS by formatting ubuntu. I inserted CENT OS DVD and restarted and i selected to delete my /dev/sda2 which is showing 20480mb and it shown me free space. but i tried to add partion /boot of 100mb it got added. but, when i am trying to add / of 3000mb in the remaining 20380mb free space it showing an error message that no free space is available.
View 4 Replies View RelatedI just mounted my drobo(NTFS) on my slackbox using NTFS-3g, and I can read all my files and see them all, but any file name with a space in it turns into EX: (File Name)... instead of (File Name)I am worried that my Sync software will not recognize the name.Does anyone have any tips Except to not put Spaces in the names of files?
View 3 Replies View RelatedI had a machine that is using ldap, but need to remove it completely.I edited the /etc/nsswitch.conf and removed all references of ldapand renamed /etc/ldap.conf to /etc/ldap.conf.bakI can log in as root, but cannot log in as any user in /etc/passwdIn the /var/log it shows pam_ldap: missing file "/etc/ldap.conf"I am guessing I am missing something else?I never set this machine up for ldap, was here when i got here, so not sure of steps to even put ldap on.
View 2 Replies View Relatedcp: writing `/tmp/tmpX2KZDc/system.image': No space left on device However, when I right-click on properties, I see it has 51 items, totalling only 130.5 KB!this is a dual boot system with Win XP and Ubuntu 10.10 (~58Gb partition)Quote:
anil@anil-HP-EliteBook-8440p:/tmp$ mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
[code]...
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
measure kernel space time and user space time?
View 1 Replies View RelatedJust installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
View 1 Replies View RelatedI'm trying to find a good desktop search tool. Beagle is dead, Recoll and Strigi are KDE, and Tracker is not many features (can't even search Thunderbird 3). Do I miss something? Is desktop search on Linux dead? Should I use Google Desktop Search instead
View 2 Replies View RelatedWhat is the main difference between these two ? NIS and LDAP ?
View 1 Replies View Related
