General :: Prevent Ubuntu From Putting Monitor To Sleep?

Jun 23, 2010

Ubuntu 10.04

Under Preferences > Power Management I have changed the settings to never put the computer to sleep and never to put the display to sleep.

My display still goes to sleep and I am prompted for my password when I leave the computer unattended.

I would like to be able to hit the "Lock Screen" app I added to the top panel to lock my screen, but otherwise I would like it to just stay on.

View 1 Replies


ADVERTISEMENT

Ubuntu :: Hdparm Not Putting HDD's To Sleep?

Dec 12, 2010

Im wanting to put HDD's to sleep using hdparm after 20min of activity (a 4x disk raid5 array and two single disks). I have edited /etc/hdparm.conf, adding the following lines at the end of the file:

Code:

#6TB RAID5 POWER DOWN
/dev/disk/by-id/scsi-SATA_ST32000542AS_5XW0T1R6 {
spindown_time = 240

[code]....

Code:

sudo hdparm -y /dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJDWQ411622

The HDD's will sleep with out issue. Ive looked around my log files and cant seem to find anything to do with hdparm, or the HDD's sleeping. Have I make a mistake in the .conf file? Is there some place hdparm logs, or if I can activate some sort of verbose mode? Or does hdparm need to be activated on boot?

EDIT: I'm using ubuntu 10.04.1 x64 last updated today.

View 5 Replies View Related

Ubuntu Networking :: Putting Screen To Sleep Stops Connectivity?

Feb 20, 2010

It has come to my attention that if my laptop's screen (not the computer itself) is put to sleep, then connectivity stops until it is woken up again. This is very annoying! how to prevent this / how to work out

View 2 Replies View Related

Ubuntu :: How To Prevent Sleep During Processing

Jun 19, 2011

If I set my Ubuntu 10.10 to sleep after an hour of inactivity, I can't leave Blender to render overnight. The processing that Blender is doing seems to be ignored, and the computer goes to sleep after an hour. How can I prevent this from happening? I don't want to set Sleep to Never, I would like the computer to sleep after Blender is done.

View 7 Replies View Related

Fedora :: Prevent F From Going To Sleep / Hibernate?

Jun 17, 2011

I there anyway to prevent Fedora from going to sleep / hibernate.

View 1 Replies View Related

Ubuntu :: Prevent The Sleep State From Being Lost On Power Failure?

May 17, 2010

When I tell the computer to go to sleep and there is a power failure the sleep state is lost. Is there a way to prevent this? I already know about hibernate and I'm using it but sleep is faster and there is no complete loading of the computer (BIOS, Grub and so on) it just goes directly into the desktop. As far as I know the sleep state is done when everything is in RAM and the computer is turned off but the RAM sticks still receive power. Is this true?

P.S. Can this be done with hibernate and SSD drives? As far as I can tell from what I've read it will be the same but with no state loss. Is this true?

View 2 Replies View Related

Ubuntu :: Prevent Automatic Shutdown/hibernate/sleep When Critical Battery Reached ?

Aug 8, 2010

I'm trying to make the power manager NOT automatically shutdown / sleep / hibernate when battery power of my laptop reaches critical

I am surprised there isnt an 'NO ACTION' option for that in power manager

I've tried editing the acpi-supper in /etc/default bu couldn't find a solution in there nor in the /home/user/.gconf/apps/gnome-power-manager/ directory

View 7 Replies View Related

Ubuntu :: Monitor Goes To Sleep 10.04?

May 5, 2010

I have Ubuntu 10.04, and I have my power settings set so that my display is never supposed to go to sleep, yet it still does after 10 minutes of being idle. Has anyone else had this issue?

View 4 Replies View Related

Ubuntu :: Monitor Goes Into Sleep - Won't Wake Up

Apr 27, 2010

I am running Ubuntu 9.10 on my desktop and everynow and then I get this annoying problem. If I walk away for a bit, just upstairs to use the bathroom, sometimes when I come back the monitor is off and the power light is blinking. You know, like what monitors usually do when they are still powered on but the screensaver is done playing. However, this happens to me well before the 10 minutes that the screensaver is supposed to end.

It does not always happen, and I can't really isolate what may be causing it, as I never take a note of what I'm doing when I go pee. HOwever, I rarely do anything other that run VLC, Chrome, Firefox, or OpenOffice Writer.

The problem is that the screen won't wake up. Moving the mouse does nothing. Jamming some keys does nothing. Trying to go to text terminal does nothing. I have to either REISUB or hold down the power button on the tower.

View 5 Replies View Related

Ubuntu :: Monitor Goes To Sleep During Installation?

Jun 23, 2010

I am trying to install Ubuntu 10.04 on my PC using NVIDIA GeForce 9150LE graphics and HP w2207h monitor. After using the Wubi installer and rebooting my computer, i select the ubuntu boot menu option and it says it is preparing to continue with the installation. after a countdown before it begins, my monitor goes to sleep. i used an eMachine monitor that i used in a previous installation of 9.10 that worked fine and reached the exact same problem. When booting from a live CD and selecting try without installing the screen comes up with a blinking underscore, and both monitors went to sleep. I believe its a problem with the graphics chip, but i dont know how to fix it.

View 9 Replies View Related

Ubuntu :: Monitor Goes To Sleep And Won't Wake Up?

Aug 30, 2010

I just recently got my old box back and now I'm running 10.4. I've had some minor issues that I have got through but now there is one which seems to really be frustrating me. At any random time my monitor may go black as if it is in sleep mode. The problem is when it does this, no mouse movement or keystroke will wake the thing up. So I am forced to press the power button. When I press the power button the Ubuntu logo pops up on the screen as if it magically woke up but it is too late because now the computer is shutting down... When I go to System>Preferences>Screensaver I get to the options for the screensaver and I have about 2 seconds before that triggers the screen going black.

I can't even start until I know that my screen won't shut off at any random moment!

View 9 Replies View Related

Ubuntu :: Monitor Goes Into Permanent Sleep Upon Boot?

May 23, 2010

Whenever I boot into ubuntu 10.04, my monitor just automatically goes into sleep mode. As soon as I select to boot into ubuntu, the monitor just sleeps. There's no getting out of it. Booting into windows works fine though, so the problem has to be ubuntu.

View 9 Replies View Related

Ubuntu :: After Upgrade To Lucid Monitor Is Not Put To Sleep?

May 28, 2010

I upgraded a couple weeks ago and now my monitor doesn't go to sleep like it used to.

The settings in powermanagment show that it should go to sleep after 10 minutes.

Can someone point me in the right direction?

View 2 Replies View Related

Ubuntu :: Team Fortress 2 - Monitor Goes To Sleep?

Jun 10, 2010

I've been using Ubuntu for about a month now, gotta say I'm loving it. I've been spending more time in Ubuntu than W7 now. I've been trying to get Steam to work with Ubuntu without the whole thing exploding on me. I've got WINE and winetricks already pretty much set up, and Steam works flawlessly. The problem appears when I try to launch Team Fortress 2. The monitor instantly goes to sleep, but if I wait a few seconds, I can hear the in-game music, which means that the game is loading correctly.

I'm using the 10.04 LTS release, Wine 1.1.42. Kernel version 2.6.32-22-generic. My graphics card is a Radeon HD 4850, running Catalyst 10.5.

View 3 Replies View Related

Ubuntu Installation :: Monitor Goes To Sleep At Boot

Jun 18, 2010

infact im kinda of a "pre-life" Ubuntu user I have burned a CD-R disk with the ISO image of Ubuntu with infrarecord however... When Insert the disk and boot a screen pops up and I press enter then the language thing comes up and I select english but here is where the problem is, Its seems that for only a few seconds I can control my keyboard then it stops working...So everytime I try to click "try Ubuntu without install" I cant and it just sits there

after it sits for maybe ten seconds it looks like it is rebooting but then it says "Monitor going to sleep." and if I try to turn it back on its just a black screen. Also if I like Ubuntu (which I probably will) Im going to run a DBAN and install it from scratch and I dont really want any problems :/

View 1 Replies View Related

Ubuntu :: Monitor Goes To Sleep But Boot Continues?

Oct 29, 2010

i have updated my ubuntu 10.04 to ubuntu 10.10 and now when I boot the pc, it choes ubuntu logo, and than the monitor goes to sleep but boot continues, cause i can hear the sound!

View 3 Replies View Related

Ubuntu Installation :: Monitor Goes To Sleep Mid-login

Nov 12, 2010

My monitor falls to sleep when I get to the Grub Menu and choose "Ubuntu". It will get to the purple-ish loading screen to a minute before the monitor falls asleep. I am using 10.10, and this is my first experience with Linux. As much details as I can think of: I recently installed Ubuntu 10.10 after playing with it on a live CD. I chose to install it alongside Windows 7. The install was quick and smooth, and booted up as it should. When I get to the GRUB menu, I had more choices than I thought I would (I figured I could nix them later.)

These options were:
Ubuntu Linux
Ubuntu Linux (recovery mode)
Memory Check
different Memory Check
Windows 7

I chose windows 7, to make sure ol' semi-reliable, slow, and resource hogging OS worked. As expected, it ran through some stuff white-text-black-screen stuff to make sure all it's files were there (probably due to the fact I had to give some of my hard drive space to ubuntu). As far as I could tell, this did not modify any files, and it checked out with windows. I restarted using windows at this point....

View 1 Replies View Related

Debian Installation :: Monitor Goes To Sleep During Boot?

Mar 1, 2010

I can't get debian 5.0.4 i386 to load I can get as far as root for crash repair during boot-up but much further than that and my monitor turns off. Ubuntu 8.04.4 live cd (kernel is 2.6.24 i believe) works but says I have to enter noapic in the boot string. APIC is on and greyed out i.e. not accessible in BIOS --- might be non-compliant Only thing I can think of is to add acpi=off in GRUB entry but the change doesn't seem to work or take effect. I added it to the relevant entries in menu.lst in grub and it still didn't take effect. Grub must be getting its config info somewhere else...

View 1 Replies View Related

Fedora Hardware :: Monitor Sleep During Rhgb Since 2.6.35.9-64

Dec 23, 2010

I'm not sure, but I think this is hardware. Anyway, I have two different boxen running FC14. One has a Nvidia 9800, the other a Nvidia NV96. The former I use as a desktop, the latter a server. I've let the server go with whatever the system autodetects for video, but the desktop I've played with a ton: nouveau, nvidia, etc.

Anyway, since I upgraded both to 2.6.35.9-64, both go to sleep at some point during rhgb. I can't find anything in boot.log, messages, or what have you to try. This happens even if I go to runlevel 3, so unless I'm misunderstanding the boot sequence, this is way before X starts.

Now, just upgraded to 2.6.35.10-72 tonight, and the behavior slightly changed. Before, it would show the rhgb loading screen for a few, but then the monitor would sleep before it completed. As of this kernel, it just goes to sleep right away.

The only quirky thing I can think is that I'm running DVI out into a KVM. I have been making sure to have the machine as the active video when it boots, so it should still be able to feed EDID info to the machine, but I did notice when trying to track down nouveau/nvidia problems on the desktop that X was having trouble reading my EDID all the sudden.

I'm assuming there's some automagic default now that's putting my monitor out of range. The only way I've been able to keep the desktop running is to not have the nvidia driver installed, but also not have a driver type specified in xorg.conf. If I do that *and* specify a modelines, I can boot with rhgb off at runlevel 3, then manually start X. From the Xorg.0.log, it appears to be falling back to vesa, which is the only thing that works.

How can I debug this? If the monitor sleeps but there are no messages in boot.log, messages, or Xorg.0.log, how can I even figure out what rhgb is doing?

View 1 Replies View Related

OpenSUSE :: 11.3 - KTorrent Crashing When Monitor Go To Sleep

Jul 28, 2011

Running openSuSE 11.3 w/ a KDE 4.x desktop. Every time I'm using KTorrent, when I come back into the office and "wake" the monitor, I find KTorrent has crashed and I have to restart it. So I'm guessing that KTorrent is crashing either when my monitor goes to sleep mode or when I'm waking it up. I've tried changing some settings but when the system is running, I cannot seem to access the monitor control panel. Pressing the menu button on the side of the monitor does not bring up the monitor menu. There used to be an easily noticed "Desktop Settings" in KDE 3 but I'm not finding the equivalent in KDE 4. How to keep this Samsung SyncMaster 997DF 19" CRT from going into sleep mode?

View 6 Replies View Related

Ubuntu Installation :: Monitor Sleep Glitch Got Worse In Lucid

May 4, 2010

You know that glitch where your monitor doesn't come back after switching off for power saving? That's gotten WAY worse since switching to Lucid. It used to happen every other day or so, now it happens 2-3 times a day. Songbird used to keep it from switching off on Karmic, but Songbird doesn't work on Lucid so that's out the window.

Also: as similar error happened when restarting after the glitch happened this latest time. Ubuntu started running its routine disk check and I hit C to skip it. The screen went down like it does in the Monitor Sleep glitch. I reset again, it did it again. Eventually, I just let it do the check. This has NEVER happened before.

View 5 Replies View Related

Ubuntu :: Prevent Applications From Changing Monitor Resolution?

Jul 7, 2010

Sometimes when starting applications, especially with Wine, the screen resizes to a much lower resolution. Sometimes when I close the application & usually when it crashes/I have to kill it, the screen stays at that much lower resolution. To get my normal 1900*1200 resolution back I have to delete all the applets I've put in the top menu bar to for there to be enough space for the menu to appear for me to select System>Prefs>Monitors.How can I prevent an application from altering my resolution & just force it to run windowed, or at a higher resolution?

View 1 Replies View Related

Ubuntu :: Lucid Shuts Off Monitor Randomly - Disabled Sleep And Screensaver To No Effect

May 24, 2010

I'm running a fresh 10.04 x86-64 on a thinkpad w500, using the default video driver. The monitor shuts off randomly, sometimes while I'm using it and requires me to trigger sleep mode and waking up to bring back the screen. When it shuts off, everything else seems to be running. (i.e. its not going to sleep) I've turned off screensaver, sleep, hibernation and installed the Caffeine util to no avail.

pm-suspend.log: http://pastebin.org/273444
pm-powersave.log: http://pastebin.org/273445

View 3 Replies View Related

Fedora :: 14 - Overriding Power Management Preferences - Settings Are Set To Never Put The Monitor To Sleep

Nov 17, 2010

I have an odd problem since preupgrading from Fedora 12 to Fedora 14.

My power management settings are set to never put the monitor to sleep, yet after a certain amount of time, lo and behold, the Fedora box has gone blank and I have to enter my user information and password to get back to my gnome session.

In the power management preferences I have "never" selected for both putting the computer or display to sleep.

In the screensaver preferences "Lock Screen After" is *not* checked. (And if I click "advanced" I also note that "Power Management Enabled" is also *not* checked).

I'd just as soon not have to "log on" to this machine every time I'm away from it for a while.

View 1 Replies View Related

Ubuntu :: Monitor Goes To Sleep ... Can't Disable "powersave / Screensaver"

Jun 14, 2010

I have recently switched to Ubuntu (10.04) after running my system on Centos for years. This mostly due to much quicker startup times. I have a software that runs as a public presentation software on a public "bigscreen" so my Ubuntu runs like a "kiosk" pc that's always on. When i switched to Ubuntu everything worked lika a charm besides the fact that the screen falls in to "sleep"/"powersave" or something.

I think that i have tried everything to prevent this. I use Gnome and i have set all the powersavings features to off. Ive tried turning acpi off and i also turn dpms off at login. Nothing seems to kill the "screen powersaving" feature. As a desperate act i tried to use a software called Coffeine, this software should prevent powersavings. I added Coffeine to autostart to activate for 48h, I need the screen to atleast stay on for 24h.. Does anyone have an ide what cuses this? Dont really want to go back to Centos now... My system basicly looks like this:

[Code]...

View 5 Replies View Related

Ubuntu :: Couldn't Wake Monitor Up From "sleep"?

Aug 16, 2010

This morning I woke up and while my computer was turned on, I couldn't wake my monitor up from "sleep". So I turned off the computer and turned it back on. I noticed that the normal boot screen (which usually shows a monster truck from Abit) was pretty severely distorted.Basically all output to the screen is so distorted visually that I can't tell what's going on. I've attached two images that I took below:

The first image is at the very beginning of the boot (perhaps when the monster truck should normally show <- sometimes it shows and sometimes it is just too distorted to tell anything). The second image is after it's been on for about a minute, and you can see a little text box giving me some sort of warning (which I of course can't read). I can click "OK" or something along those lines by using they keyboard though and progress to a new warning box, but again, can't read what they say. How can I figure out what the problem is?s it definitely a videocard thing, or could this be caused by anything? I don't know if it's a software problem (running Ubuntu 10.04), or if something went wrong with my hardware overnight.

View 2 Replies View Related

OpenSUSE Multimedia :: Go To System Monitor It Will Show Under CPU% "disk Sleep"

Jan 1, 2011

openSUSE 11.3 64-bit fully updated, running the latest K3B, 2.0.1. from the Packman repos with the codecs installed. Sometimes it starts up and runs fine, others the splash and then nothing. And again other times it will start and never show up until I reboot and then there it is. When I go to system monitor it will show under CPU% "disk sleep" if that helps. FWIW I have similar issues with Nero 4. I've added myself to the cd rom group and all of that.

View 5 Replies View Related

General :: Putting MB Of Stuff Onto The Internet?

Jan 20, 2010

Noticed the statistic from the computer that it had taken 147MB from the internet today and put 8MB out. Why did it put out so much data, 8MB, why would it need to do that? It makes me paranoid.

View 8 Replies View Related

General :: Putting Grub1 Into MBR Without Having It Installed

Jan 21, 2011

I am currently trying to install Sabayon linux, and it expects to use Grub1 for booting from usb (what am I trying to do). So I copied grub files into boot section, but now I need to "root and setup" it - and that's what I can't do, because I don't use Grub1 normally, since I am on Ubuntu which uses Grub2.

(I decided to use Grub1 instead of Grub2 because Sabayon could have some special params, and I am not that much experienced to copy them in new format to grub2 configuration file). So my question is - is there a way to copy grub1 to MBR without having it installed? (using some utility or something like that).

View 11 Replies View Related

General :: Putting A Remote Syslog Into Its Own File?

Aug 11, 2010

I have a Tomato router and it has the capability to have its logs go to a external server. syslog is the obvious choice for this. So I enabled remote logging on my linux server's syslogd (syslogd -r) and I can see all of the logs in /var/log/syslog. What I want to do is take everything that comes from the IP of my router (10.0.0.1) and divert it to its own file like /var/log/tomato to avoid polluting my syslog with external logs.

I can't find any examples of someone doing this. My only solution is to get a script together that strips out any line in /var/log/syslog with 10.0.0.1 in it and puts the line into /var/log/tomato and have the script run as a cron job, but that seems unnecessarily messy.

Unless someone knows that there is a solution, I'm 95% sure that syslog doesn't support this after reading more in-depth of the man page. So I need to migrate to syslog-ng or make a crazy script that runs with cron.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved