General :: Muti-boot Of Windows 7 And Fedora 13
Sep 22, 2010
I had a windows 7 installed in my HDD and i installed fedora 13 in an extra partition. I formatted that partition as per instruction dividing it into "/boot","home","swap".. I have completed the installation successfully but after rebooting the windows 7 loaded automatically without taking a choice.. i didn't found fedora anywhere.. how to boot them both?? I have read many articles but found nothing useful just reading the word GRUB & GRUB... pls anyone guide me through full process.
View 5 Replies
ADVERTISEMENT
Jan 28, 2010
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
View 8 Replies
View Related
Jul 20, 2010
Ever since installing 11.3, my Samsung CLX-3175 laser mfp no longer prints. It worked fine under 11.2 using the Samsung proprietary unified driver. That driver no longer seems to work under 11.3. The print job never leaves the queue and the printer must be rebooted (it is a networked printer) to be recognized by the operating system after deleting the job. Here is the relevant error printout from the cups error log from an attempt to print the test printer job:
[Code]....
View 9 Replies
View Related
Jul 10, 2011
I had Ubuntu 11.04 and Windows7 installed on my computer. I thought of trying fedora 15 and installed it on a different partition. Now only fedora and Windows boot up. Can I triple boot my system and how? If not, how to get back Ubuntu 11.04 and Windows 7 as before.
View 5 Replies
View Related
Mar 13, 2010
i installed windows 7 successfully. When I installed it,I created 40 gb of unallocated space in the hard disk for the Fedora installation. However, whenever i start the partition editor during the Fedora installation, it says that there is no free space in your hardware, even though it shows 40gb space in the disk partition table.
View 5 Replies
View Related
Jun 30, 2010
I am planing to install fedora 13 on my dual boot (windows-7 + fedora) laptop. Previously some one helped me installing fedora on my laptop. Below let me mention the my file system architecture as the question is related to it. It's a 320 GB hard drive.
1. First 250 MB primary partition (used to be for /boot, which is currently unallocated, because in last installation I chose fedora to install automatically).
2. Next 120 GB windows primary partition.
3. Next 200 GB Logical partition
a. First 125 GB for windows backup
b. rest for Linux (500 MB + 60 GB).
As Linux was installed later thus it wrote the boot partition itself. I want the boot partition in the first 250 MB partition (reason, to be safe, I don't want to mess up with the master boot record while playing with Linux), also need to install fedora 13. The architecture I want is following:
1. first 250 MB: /boot
2. Next 120 GB: Windows
3. Logical:
a. First 125 GB: Windows backup.
b. Next 4 GB: /swap
c. Rest: /root -- I want to install Fedora here
So, what I plan to do is to whip out all the current Linux file systems and insert fedora dvd and install according to my criteria!
Now my questions are:
1. since currently Linux has the master boot record, will it cause any problem for the machine to boot up from installation dvd, if I whip off all the current Linux partitions? (Or in other words, does installation/ live-CD need a master boot record to boot? -- I am guessing once I reinstall Linux, booting is not a problem).
2. Once Linux is whipped off, can windows boot up automatically?
3. Is there any worry of messing up windows, specially its boot sector(off course I will take precaution not touching windows partitions!)
View 5 Replies
View Related
Jan 23, 2010
I want to make dual boot system with windows Xp and Linux fedora 11, please help and guide me in detail, also I tried it with fedora 10 and windows xp, it easily works without any problem, but in fedora 11 the grub boot loader is not detecting the installed Xp
View 2 Replies
View Related
Sep 22, 2010
ted my old laptop with windows xp home ed and Fedora (xp was installed first). When I boot to Fedora OS to fill in initial settings (user name, password, network etc) to get it up and running the mousepad doesn't work (there is no cursor). It still works fine in Windows.Anyone know how to get this sorted? The laptop is an HP Pavillion ze2000. No external USB mouse or similar has been used.
View 3 Replies
View Related
May 25, 2011
I have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies
View Related
Feb 24, 2009
I've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
View 9 Replies
View Related
Sep 11, 2010
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies
View Related
Mar 14, 2011
I just installed CrunchBang Linux and it's great! But I can't boot into windows anymore. I'm sure it didn't delete my Windows partition-it's mounted. My linux partition is /dev/sda1 Windows is /dev/sda2
Code:
sudo update-grub
Found linux image: ....
Found initrd image: ....
Found linux image: ....
Found initrd image: ....
done
how I can get Windows to reappear? I've had bad luck with Grub in the past and I don't want to fight it on my own...
View 9 Replies
View Related
Jan 10, 2010
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
View 7 Replies
View Related
Jun 15, 2011
Dual booting Windows 7 and Fedora 15. What I would like to know is if I can change the boot order to boot Windows 7 first and Fedora 15 as other or second.
View 5 Replies
View Related
Apr 6, 2011
A colleague of mine was studying at the University of Vienna and saw an application which was based on linux whereby other pc's booted from it and if on the server they had set it to force a clean install on that PC it would download and install a windows image. Does anyone know of the app or could point me in the direction of a similar app.
View 5 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Dec 16, 2009
my partitioning layout was as follows
Vista Recovery
Windows 7
GRUB
Extended
-->Fedora 12 (ext4)
so, I shrunk my recovery in Windows 7 successfully, and booted into my Fedora 12 live cd to run Gparted, and move the partitions so that the free space could go towards fedora, I did such, and then I couldn't expand the partition to my dismay. Next, I woke up this morning, tried to boot to fedora to run SSH, grub loaded, but when I tried to boot fedora, I got the "File system check failed" error, and when I tried 7, it just went to a blank screen with a single "_" in the top left-hand corner.
View 7 Replies
View Related
Feb 27, 2010
i had windows vista and i installed fedora in the same HD, but now when im at the bootleader screen i got 2 options "fedora" and "other". i can boot fedora normally but i cant boot windows! i know windows still here because i can see my win files in the HD.
View 6 Replies
View Related
May 20, 2010
I am trying to install Fedora 12 using the installation DVD. When I boot the machine, I get an error message "No boot device available". I get the same error when attempting to boot from CDs and DVDs for various versions of linux, but I can boot Windows XP using a windows install disk in the same DVD drive.
The machine is a Dell 670 workstation, containing one SATA hard disk. I have tried enabling and disabling the SCSI controller, but that has no effect. The machine previously had Windows XP installed, which I deleted using "killdisk". I only want to install Fedora: I am not trying to set this up as a dual boot machine.
View 3 Replies
View Related
Jul 9, 2010
I have installed Fedora and Windows XP. I want to remove automatic boot on Fedora because it's very annoying. remove that automatic boot or auto boot on Windows XP?
View 2 Replies
View Related
Aug 30, 2011
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies
View Related
Sep 17, 2011
I previously had an install of Windows 7 on one drive, and an install of Fedora on the other hard drive. I have a partition on the second drive for GRUB, and the normal Windows bootloader partition on the first drive. I previously had it set up with EasyBCD to be able to chainload the bootloader on the second hard drive, however now with Windows 8 installed in addition to Windows 7 and Linux, it only shows the menu options for Windows (It only shows Windows 7/8 in the boot menu).
Is it still possible to boot Linux from the Windows bootloader?
View 1 Replies
View Related
Sep 4, 2010
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
View 4 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Jan 31, 2009
Originally I had Ubuntu running on my machine. I installed windows beta 7 with a working dual boot. Get everything working in grub again. I decided to give Fedora a try and wiped my Ubuntu partition and installed Fedora. Everythings all good...except the reconfiguration of grub has left out my Windows 7 partition (nothing out of the norm) I tried manually adding windows 7 to /boot/grub/menu.lst but it's not working, when I try to boot into Windows 7 i get a little flashing "_" for a really long time and nothing happens.
View 2 Replies
View Related
Dec 26, 2009
I know how to do a dual boot. I have done it many many times. But 1 I always installed Windows first so I would not have any problems with Fedora grub, and 2 the computers I did dual boots on were ones that I didn't really care if something went wrong on. But I want to do a dual boot on my laptop which I do care if something goes wrong on. I have all my stuff backed up so its ok if I something goes wrong and I have to reinstall. But I would rather not have to set everything up on my laptop again. So my question is what is the best way to do a dual boot with Windows Vista (the one that came with my laptop) and Fedora 12. I already have Fedora 12 on my laptop. I need to do these things:
1. Make my Fedora 12 partition smaller to make room for Windows Vista.
2. Install Windows Vista without Windows Vista Grub messing up my Fedora 12 grub.
I understand that I am doing this at my own risk so please dont not respond. Like I said I have all my data backed up so I can reinstall if I need to. I would rather not but its doable.
View 2 Replies
View Related
Jun 28, 2010
I have a PC with two seperate hard drives. One has WinXP running on it, and on the other drive I've installed Fedora 13 from a live CD downloaded from the fedora website. How do I get the system to allow me a choice of which OS I want to start on boot-up.
View 1 Replies
View Related
Mar 11, 2011
I looked for threads about this but didn't find them. If they are out the and I could be pointed to them it would much appreciated. I'm in the midst of building a new system and it will be a dual boot system with Windows 7 and Fedora. There will be two separate hard drives for each OS.
Currently I have a dual boot Win XP and Fedora system with a hard drive dedicated to each OS. The nice thing with this is that I found here on these forums a change to one of the Windows files that allows Windows to recognize that there are two different operating systems without having to spend the money for something like partitioning software. It was a simple one line change to an ini file, I think. Can this be done with Windows 7? If I'm not clear on what I'm asking let me know. It's been a while since I last did this so I'm a little fuzzy on it all.
View 2 Replies
View Related
Jan 13, 2010
I have two partitions, one fedora and one for windows. I meesed my fedora so I tried to install it again. I did al okay in my linux partitions but the installation stopped. maybe a bad image. Now, when I boot my system I only get the grub> What command can I run to boot windows at least?
View 1 Replies
View Related
Aug 25, 2011
I've recently changed from Ubuntu to Fedora and upgraded my system, but I'm experiencing a problem with GRUB. I' ve got a dual-boot system, Win XP and Fedora 15, but I can't boot into Windows. (only if I change the boot device in my bios)fdisk -l gives me following:
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 3 Replies
View Related
