General :: Move Partition In GParted?
Apr 10, 2010
The following is a screenshot of GParted run on my system. There is a small unallocated space at the beginning of the list. This 1 MiB space is kind of annoying and I'd like to merge with any other partition except /dev/sda1, /dev/sda6 and /dev/sda4. When I right click on the unallocated partition, the only available operation is "New". And, if I click on "New", I get the following error message.
It is not possible to create more than 4 primary partitions
how to go about merging the small unallocated space with other partitions?
View 3 Replies
ADVERTISEMENT
Sep 18, 2009
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes
255 heads, 63 sectors/track, 3473 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
View 2 Replies
View Related
Jun 26, 2011
I have 3 partitions on my hdd right now, a Windows 7 one, the associated System Reserved and my Linux Mint partition. I was trying to use GParted to make another partition by splitting my Linux Mint one in two smaller partitions. I can't, however, unmount it, and so can't partitions it. I have considered partitioning it from Windows 7, but I'm afraid it will screw some things up and stop booting up correctly. So, what could be making the partition unable to unmount?
View 11 Replies
View Related
Feb 12, 2011
I would like to shrink my os partition without messing with it's data, to make room for a 2nd os. Will this happen if I command Gparted to Resize?
View 2 Replies
View Related
Jun 27, 2010
I tried to repartition my hard (320GB) drive yesterday because I need (40 GB) more space in windows, below I mention the previous file system and later file system architecture. It is dual boot (windows 7 and Fedora 13). I am sorry that I did not take screenshot!
1. boot partition, 100 MB
2. windows-7, around 75 GB
3. extended, around 230 GB
inside extended 3 logical partitions:
3a. 125 GB for backupv(NTFS)
3b. 4 GB for linux swap
3c. 100 GB for linux
I used gparted. Since I had to create more space in between windows and logical partition for increasing windows, (I could not shrink Linux as it comes to the end) so I removed Linux (I reinstalled later) first, moved (hold in the middle and drag) backup partition to the right by 40 GB, created a primary partition out of the left portion of logical partition and merged with windows. Finally installed Fedora on the right most portion (60 GB now) in the logical partition. Now my file system looks like following;
1. boot partition, 100 MB
2. Windows-7, around 115 GB
3. extended, 190 GB
[code]...
Now my problem is, I don't like that 7.84 MB unallocated space in the logical partition. I was told that it (smaller than the smallest chunk gparted can allocate to any partition) will always be there unless we allow some program to do the partitioning automatically rather than I manipulate/move it manually? It is true? If so is there (m)any software which can do this? Or simply how to get rid of this unallocated space.
View 1 Replies
View Related
Nov 11, 2010
First of all, the boot device is an 16GB SD card. I install Citrix XenServer on it but I make the partition too small (XenServer makes a lot of logs file). I resize the partition but now it give "Illegal OpCode" and red screen everytime it boot.I already create the image of the whole SD card using dd and already try these process three times = restore the image, test that it can boot properly, then resize the partition using gparted, then it can't boot.
I already post this question in XenServer forum (with screenshot) but nobody answer there.The hardware itself is HP Proliant ML350 G6 with internal SD slot.
View 5 Replies
View Related
May 24, 2011
I am trying to create a partition using gparted for my centos installation but I accidentally deleted my partition table. my partition was created on windows7 and dual boot with ubuntu. I am trying to recover it using test disk with ubuntu live cd but after I recover it still I neither can't boot on windows or Ubuntu here is the result of patition quick seart
Quote:
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Partition Start End Size in sectors
>D HPFS - NTFS 0 32 33 12 223 19 204800 [System Reserved]
[code]....
I tried to set up my partition characteristic like this
Quote:
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Partition Start End Size in sectors
1 * HPFS - NTFS 0 32 33 12 223 19 204800 [System Reserved
[code]....
and still can't reboot on my win7 or ubuntu
View 1 Replies
View Related
Jul 7, 2010
I was using gparted to resize my /var partition, which is supposed to be an ext4 partition, and during the beginning stages of the resize/move procedure I cancelled out of the process despite the warning this might be bad. The process was in the middle of the "read" stage so I figured nothing can go wrong during a read, but now I cannot access this partition mount wise. Is there anyway to repair this?
View 6 Replies
View Related
Mar 21, 2011
I realise that this is not a pure Linux Q, but I am hoping for tolerance and even help!After removing the partitions (/,/home) that held an older Linux installation, gparted showed the original Windows XP partition followed by the new unallocated space. On rebooting, there was a Grub rescue error (text not noted, sorry). A live install running gparted shows a totally empty disk!
The removed OS was booted via Grub2 and I imagine that it is choking when there is no secondary(?) file to be found since it was vaped. I also imagine that this is a fairly straight-forward matter, something like replacing the MBR but I am so far from Windows these days that I am unsure how to progress with rescuing the partition. The machine has no floppy - that's how I would have initially booted it way back when. Is this something that I can do either through a Linux live distro or via a Windows CD?
View 13 Replies
View Related
Jan 14, 2011
Unable to resize fedora 12 lvm parition with gparted. Need to resize to make room for ubuntu linux on same drive. When the fedora lvm parition is selected gparted says "No lvm support at this time". I am using gparted through the pmagic (partedmagic) linux boot disk. I have almost the lastest pmagic (5.7) there is a pmagic 5.8 on source forge.
View 2 Replies
View Related
May 22, 2010
Ok my current issue is that my ubuntu partition(my currently most used os) at the moment is getting low onspace so i decided to take 40GB from my windows one since it wasn't using it. I made it smaller and left the area unallocated. I got into gparted using the live disk and it refuses to work for me. I cannot move my ext4 partition to the 40GB partition and put that free space at the end. This is the first time i've ever had this problem. This is the first time i've ever tried ext4.
View 3 Replies
View Related
May 20, 2010
This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space.
Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!
View 3 Replies
View Related
Jan 11, 2010
I removed an ntfs partition I had in my HD and then resized my home partition with gparted to occupy all the available space. The resulting partition is supposed to be 129GB, and gparted/partition magic see that size. But the system does not, and all tools report the old partition size and the same free space I had before resizing.
View 5 Replies
View Related
Oct 30, 2010
I have a 230GB hard drive wich I don't know it's name.I have a 207GB windows vista partition and the rest of it is for linux (Ubuntu).Today I decided giving it all space to Ubuntu Linux ,but didn't want to lose all my data from the windows partition.I thought that by deleting all things except the folder with my data and leaving enough space to shrink and make enough room for another partition to put my data folder.The logic is that i could then format that partition wich previously was windows and use it all for ubuntu without losing data.After having ubuntu installed i could copy my data folder to /home and then delete the previous partition and make /home bigger.The problem is that after i freed the space,when using Gparted to shrink it says that the partition has bad sectors or the filesystem has problems and so it can't do some operations.
What could have went wrong?It told me to do chkdisk but as i deleted all the windows files and i can't boot into it anymore.I used the vista dvd to do that.I rebooted 2 times as it says and after that when trying again nothing changed.I tried to use ntfsresize with the --bad-sectors argument and also the -f argument but it's useless.At the end it says it won't do anything until the ntfs filesystem get repaired.Or it says it is too risky to continueIs there any way i could do some superforce command to resize it without losing data?Please don't tell me to put it on an external storage cause i have like 70GB of datas to save...no i don't have an external hardrive
View 7 Replies
View Related
Jun 16, 2010
I installed a dual boot windows 7 and xubuntu and now decided that I would like to allocate more hard disk space to xubuntu. I've resized the windows partition (sda2 in the screenshot) and it is now the grey unallocated. I'm having trouble moving this unallocated space to the linux portion (sda5). I did my homework and found that this is done by booting off a live cd and using gparted from there, because you can't modify a partition that you're using. I also read that you had to turn swap off. I did both of these tasks, but as you can see from the attached screenshot, I am unable to resize the linux partition to fill the unallocated space.
Here's my "sudo fdisk -l" for reference:
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
Also, the sda4 is a shared partition that I can access from both windows and linux.
View 7 Replies
View Related
Aug 25, 2010
I wonder if anyone can help me. A little background, I wanted to move my xp install to a bigger hard drive. I used Saikee's method and worked fine (as usual). My machine was a dual boot system, the xp partition was with little space so I get rid of my vista install, deleted its partition. That went fine also. Rebooted directly to XP.The problem is as follows:
a) In order to increase the size of my xp partition (old machine, athlon64 1gb of RAM) I moved my data partition to the left in order to have unallocated space near the xp partition. That was successful, I rebooted and everything was fine.
b) I run again Gparted and increased the size of the partition. Gparted told me the process was successfully applied. I rebooted.
c) after post I get the following error "error reading disk, press ctr-alt-del". I did it like five times and I get the same message.
d) With my xp install disk I tried fixboot and fixmbr and nothing changed
Since I have the original hd, I did it again, and the same thing happened after resizing xp partition, before the resizing process I was able to boot normally. I used Gparted live cd v 0.6.2 and as far as I recall I left "adjust to mib" option
View 5 Replies
View Related
Feb 8, 2010
I was reading another thread about someone with a bad partition table and I decided to join this forum. I'm not going to take any drastic actions with the partition (/dev/sda3) in question. I am going to wait for instructions on what to do first. I am not very good with Linux and need some hand holding. System: DELL 4550 Dual-Booted with XP and Ubuntu. Works OK, just no swap. Well, here's what I did: I deleted a partition for Windows XP Pro because it was a trial, and it ran out. I then decided to slide the swap partition for the Ubuntu Linux that I dual-boot into over. (If this was successful, I was going to try expanding the root partition to take up the unused space.) I used Gparted on a CD to do this, as I figured it was safe to do.
I now cannot mount the swap space at bootup (and have to go into a backup version of the OS), although I can use Gparted in Linux to execute the "swapon" command, and it appears that it worked because I now see "swapoff" as an option on the context menu. (I actually don't even need a swap partition, except to hibernate.) If I highlight the swap partition and click on "Drive" on Gparted's menu bar and select "Create Partition Table", it will erase all data on /dev/sda, so how do I fix the bad partition table non-destructively?
View 14 Replies
View Related
Dec 11, 2009
I usually repartition a disk by backing up, deleting the partitions, formatting them and repartition. I just did a 200 gig backup (so i am safe) and i want to join 2 (ext3) partition together, sdb1 (data4) and sdb5 (data5) into one big partition. Is there a way to do it without scraping the data in sdb5 (data5). It would save me from rewriting the data back to that new partition (200 gig is time consuming).
View 1 Replies
View Related
Jun 28, 2010
When installing Ubuntu (10.04) I chose the /home to be installed in a separate partition.I would now like to move the /srv directory into the same partition. The problem I found is that Ubuntu did not make a /home directory inside the partition itself. It just places the account directories in the partition and mounts it to /home. So I cannot just easily move the /srv folder into the partition.
How can I:
Move those account directories into a home folder inside the partition Make that new home folder the default /home folder. ditto with the /srv folder, or any I choose in the future.
View 3 Replies
View Related
Mar 12, 2010
Anyways, I recently got into the whole HTPC scene, and picked up an Acer Revo for my self, with a media center OS (XBMC) that was apparently modded from Ubuntu. Keep in mind that I can only use the terminal for any of this, as the GUI is just for video settings, etc.
So, XBMC just totally crashed on me, and the GUI stopped working. The files were still there, I just couldn't watch them. After many hours of tinkering, I decided to just reinstall XBMC, but make two partitions, and then move my movies and stuff to the new, working partition, and afterwards, delete the old, non working one.
I just don't know how to move from one partition to another.
So, can someone explain, in absolute layman terms, how to move my "Movies" folder from my first partition, to the New one?
View 4 Replies
View Related
May 25, 2010
I created a partition in my hard disk for my data (documents, multimedia, etc.).How can I:Move the /home/ directory to the new partitionMake the OS (Ubuntu Linux) treat that directory as the default /home/.
View 1 Replies
View Related
Sep 5, 2010
There was a Toshiba Satellite notebook with XP I decided to install Fedora 13 in dual boot mode.So, I booted with Gparted and shrunk the ndows XP partition to just 24 GB.Then I set up partitions for Linux this way/boot, ext4 256 MB/, ext4 16 GB/home, ntfs 176 GBswap, 8 GBI intentionally left about 8 GB left just in caseThen I proceeded to install Fedora 13.I used the customized mode to use the already set up partitions and keep Windows XP.At the moment of setting the mounting points, fine with /boot, / and swap. But Anaconda wouldn't accept mounting point for /home.I went on anyway.Fedora got set up and run moothly.However, /home resided in / with only 10 GB left.And the /home partition could be seen as a separate disk with its 176 GB.This is /etc/fstab:
#
# /etc/fstab
# Created by anaconda on Sun Sep 5 05:46:26 2010
[code]...
View 14 Replies
View Related
Mar 27, 2011
The good news is I was able to shrink one of my partitions to create some unallocated space. The bad news is the unallocated space is on my primary partition, so gparted is not allowing me to use that space to create another partition since I already have two primaries and an extended. Any tricks to do that?
View 7 Replies
View Related
Nov 5, 2010
I'm currently dual booting Windows 7 64bit and Ubuntu 10.10 each on primary partitions. Then on the other 2 partitions I have the manufacturer recovery partition (which I am not sure I should remove...), and then a partition for storage and files. Now I want an Arch Linux installation on the hard drive, but obviously I cannot create a new primary partition because I already have 4. I found out that linux can run from a logical partition (which you can have multiple of)..However I do not want to format my Ubuntu partition and I'd prefer to keep the data on there all intact. Is there a way to move my Ubuntu installation (on the primary partition) to an extended partition where I could put multiple logical partitions for multiple linux installations?
View 2 Replies
View Related
May 10, 2010
I've been trying to figure out how to move /home to the other partition that exists on my computer, however it's ntfs and turns out it's impossible to move my /home there. So how do convert that ntfs partition to ext3, I don't mind loosing data that's in that partition. [url] is the partition I'm talking about. So what's the best way to do it ? If you write what commands I should use please include partition names.
View 3 Replies
View Related
Nov 29, 2010
Around 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.
View 3 Replies
View Related
Jun 20, 2010
i can't resize my partition sda1?
View 3 Replies
View Related
Aug 30, 2010
sda2 and sda5 are the same partition. i set up sda5 because i wanted it to be ext4 just like sda1. i thought if i went ahead and formatted the second partition to ext4 it would just show up, automount and always be there. in my case it hasnt worked that way. is anything wrong with this, if so, how do i fix it?
View 2 Replies
View Related
Sep 17, 2010
I have a laptop with a 320GB disk. Windows 7 and Ubuntu 10.04 It has 8 partitions: [From Testdisk]
[code]....
Long story short, after reinstalling windows 7 and messing around a little with its partition and the other ntfs one (resizing etc); Gparted won't open the disk. It shows all the disk as unallocated space, And throws a message to the terminal which says something like "Can't have a partition out of the disk." Funny thing is that *almost* everything is working fine. Everything works except that ubuntu can't use the swap. (Dmesg says: "Swap area shorter than signature indicates") Also, testdisk, if i run a deep search for partitions, finds the last partition twice, but the second time the partition goes from 37129 0 1 to 40240 254 63 , while the disk ends at 38913 255 63. The problem is that I can't use Gparted now and I want to resize a partition.Also I believe that going without swap is not good for ubuntu.
View 2 Replies
View Related
Jan 19, 2011
What partition type does Mac OS X use, and can gparted create one?
View 6 Replies
View Related
