I tried to repartition my hard (320GB) drive yesterday because I need (40 GB) more space in windows, below I mention the previous file system and later file system architecture. It is dual boot (windows 7 and Fedora 13). I am sorry that I did not take screenshot!
1. boot partition, 100 MB
2. windows-7, around 75 GB
3. extended, around 230 GB
inside extended 3 logical partitions:
3a. 125 GB for backupv(NTFS)
3b. 4 GB for linux swap
3c. 100 GB for linux
I used gparted. Since I had to create more space in between windows and logical partition for increasing windows, (I could not shrink Linux as it comes to the end) so I removed Linux (I reinstalled later) first, moved (hold in the middle and drag) backup partition to the right by 40 GB, created a primary partition out of the left portion of logical partition and merged with windows. Finally installed Fedora on the right most portion (60 GB now) in the logical partition. Now my file system looks like following;
Now my problem is, I don't like that 7.84 MB unallocated space in the logical partition. I was told that it (smaller than the smallest chunk gparted can allocate to any partition) will always be there unless we allow some program to do the partitioning automatically rather than I manipulate/move it manually? It is true? If so is there (m)any software which can do this? Or simply how to get rid of this unallocated space.
I am trying to partition my unallocated part of the disc in my laptop in ubuntu 10.04 using Gparted.Here is a screenshot of my disk and its partitions:
when i select the unallocated space i can ONLY create a PRIMARY partition..the LOGICAL and EXTENDED ones are grayed out.. i want to partition this unallocated space in two or three parts, and it seems i only have one (out of the four) primary partitions left.. so i cannot create the partitions i want!
After I formated my windows partition using GParted it became Unallocated and moved under Extended partitions. I can't create the unallocated partition as primary one, or drag it out of the extended ones. I tried GParted live CD also, but nothing worked.
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes 255 heads, 63 sectors/track, 3473 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
I used to run Windows and Ubuntu side by side. I have removed Windows and only run Linux now. However, when I try to release the partitions for use with Linux, Gparted just doesn't give me the correct resize options. Have attached a file, so you can see my problem. I believe its because the /dev/sda4 drive is sandwiched between the two unallocated partitions, and I just have no option of resizing into those empty ones. I have tried formatting them, but it just won't play. Ignore the fact they have locked keys, I have been using the Live CD to boot, but this screenshot was taken from my normal login.
I have accidentally deleted the first booting parition (Windows 7) with GParted, so then I immediately googled and found an utility testdisk which has successfully recovered the parition and it can boot and be seen from linux again. Only Exception is GParded, which sees an unallocated space on whole disk from this point!
I found this post [URL].. which looks like solution, but I can't figure he count a number of sectors 978726293. 500107862016 / 978726293 = 510.978263885 what is near to 512 (sector size), but not equal. So I don't understand the arithmetic.
I have 500 MB of unallocated space on my hard drive. I would like to create a new partition with ext 3. Unfortunately, gparted gives an error so I am wondering if there is a way to do this without using gparted.
I installed a dual boot windows 7 and xubuntu and now decided that I would like to allocate more hard disk space to xubuntu. I've resized the windows partition (sda2 in the screenshot) and it is now the grey unallocated. I'm having trouble moving this unallocated space to the linux portion (sda5). I did my homework and found that this is done by booting off a live cd and using gparted from there, because you can't modify a partition that you're using. I also read that you had to turn swap off. I did both of these tasks, but as you can see from the attached screenshot, I am unable to resize the linux partition to fill the unallocated space.
Here's my "sudo fdisk -l" for reference:
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
Also, the sda4 is a shared partition that I can access from both windows and linux.
Although I've seen several threads with the same problem, I have not managed to solve the problem. GParted identifies my /dev/sda as unallocated disk space! The machine a Dell Inspiron M101Z laptop running Ubuntu 10.10 32 bit + W7 64 bit. I wouldn't have discovered the problem until I decided to replace my 32 bit Ubuntu with the 64 bit version, then GParted from the live cd identified my drive as Unallocated space!
I've already tried to use testdisk to write the partition table, but though it writes the table successfully and then it prompts to reboot, GParted still sees it as Unallocated. I've also tried fdisk /dev/sda then p then w to write the partition table, but again GParted screws up for some reason and sees it as Unallocated.
/dev/hda1 - ext3 boot partition (20 MB) /dev/hda2 - lvm2 main partition (6 GB) unpartitioned space - 12 GB
I would like to merge the unpartitioned space into the lvm2 partition known as /dev/hda2. I tried using GParted, but it does not support lvm2. What commands or utilities could I use to add the unpartitioned space to hda2 without losing my existing data?
I'm installing Windows to update my BIOS. I've removed a previous partition but I can't merge free partition to my original partition containing data. How to solve this problem? I don't want to format the ext4 partition.
The good news is I was able to shrink one of my partitions to create some unallocated space. The bad news is the unallocated space is on my primary partition, so gparted is not allowing me to use that space to create another partition since I already have two primaries and an extended. Any tricks to do that?
My setup is as shown in the image below,i have 170G of unallocated space which id like to add to my Extended partition so that i can create logical partitions.I can only create one primary partition now of 170G which i don't need.Can i boot my machine off a live-cd and a run a gparted and add the unallocated space to the extended partition?
I downloaded partition wizard to get rid of a linux partition on my hard drive. after I fixed my mbr I used partition wizard to delete the linux partition and resized c to take up the rest of the space, partition wizard is reading my c drive as unallocated and also windows is not detecting my recovery partition at all... what can I do to fix this. I fear that even though my recovery partition exists that it may be of no use to me if windows does not recognize it, and how can I format the unallocated space with out loosing all of my data?
On a certain computer, I had four primary partitions. The person who installed the Windows 7 on the computer made two partitions for the Windows (sda1 and sda2). Then I made another two primary partitions (sda3 and sda4). sda3 was empty. sda4 is an extended partition that contained the /swap, and /.According to someone else, some viruses get in on the Windows partitions and can then get over to the Linux partitions if they are primary and right after the Windows partitions, or something like that. This person suggested that I create sda3 when I install Linux(SLES 10), but to install Linux on sda4. Then later I can change sda3 to secondary.So I tried this, and the Linux installation went fine.
I decided to change sda3 before I load the application software onto the computer.So I put the GParted CD in, but to my surprise I realised that the harddisk was actually 1 TB, and not 500 GB as I thought. So I had extra space to the right of sda4. I wasn't quite sure what to do with sda3. I thought that perhaps it would be better to unallocate sda3, move the current sda4 to the left, and then make another primary partition on the right of sda4, or just stretch sda4 both ways.Anycase, I unallocated sda3, and just left sda4 as it was.Hm, perhaps you can anticipate the end of the story. I removed the GParted CD, and restarted the computer, but now the computer doesn't let me choose whether I want to boot into Linux or Windows. Um, it doesn't boot at all from the harddisk.
I know it's dangerous to play with partitions, but sometimes the job won't be done if you are too afraid of doing anything, and I dare say you won't learn anything either. There was nothing on sda3, so I didn't think it would have nasty after effects. There isn't any important data on this computer yet, it was two new installations of Windows and Linux. So I guess I could format the harddisk and just reinstall everything, but I would like to learn what goes on underneath the surface.
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
The following is a screenshot of GParted run on my system. There is a small unallocated space at the beginning of the list. This 1 MiB space is kind of annoying and I'd like to merge with any other partition except /dev/sda1, /dev/sda6 and /dev/sda4. When I right click on the unallocated partition, the only available operation is "New". And, if I click on "New", I get the following error message.
It is not possible to create more than 4 primary partitions
how to go about merging the small unallocated space with other partitions?
I have 3 partitions on my hdd right now, a Windows 7 one, the associated System Reserved and my Linux Mint partition. I was trying to use GParted to make another partition by splitting my Linux Mint one in two smaller partitions. I can't, however, unmount it, and so can't partitions it. I have considered partitioning it from Windows 7, but I'm afraid it will screw some things up and stop booting up correctly. So, what could be making the partition unable to unmount?
First of all, the boot device is an 16GB SD card. I install Citrix XenServer on it but I make the partition too small (XenServer makes a lot of logs file). I resize the partition but now it give "Illegal OpCode" and red screen everytime it boot.I already create the image of the whole SD card using dd and already try these process three times = restore the image, test that it can boot properly, then resize the partition using gparted, then it can't boot.
I already post this question in XenServer forum (with screenshot) but nobody answer there.The hardware itself is HP Proliant ML350 G6 with internal SD slot.
I am trying to create a partition using gparted for my centos installation but I accidentally deleted my partition table. my partition was created on windows7 and dual boot with ubuntu. I am trying to recover it using test disk with ubuntu live cd but after I recover it still I neither can't boot on windows or Ubuntu here is the result of patition quick seart
I was using gparted to resize my /var partition, which is supposed to be an ext4 partition, and during the beginning stages of the resize/move procedure I cancelled out of the process despite the warning this might be bad. The process was in the middle of the "read" stage so I figured nothing can go wrong during a read, but now I cannot access this partition mount wise. Is there anyway to repair this?
I realise that this is not a pure Linux Q, but I am hoping for tolerance and even help!After removing the partitions (/,/home) that held an older Linux installation, gparted showed the original Windows XP partition followed by the new unallocated space. On rebooting, there was a Grub rescue error (text not noted, sorry). A live install running gparted shows a totally empty disk!
The removed OS was booted via Grub2 and I imagine that it is choking when there is no secondary(?) file to be found since it was vaped. I also imagine that this is a fairly straight-forward matter, something like replacing the MBR but I am so far from Windows these days that I am unsure how to progress with rescuing the partition. The machine has no floppy - that's how I would have initially booted it way back when. Is this something that I can do either through a Linux live distro or via a Windows CD?
Unable to resize fedora 12 lvm parition with gparted. Need to resize to make room for ubuntu linux on same drive. When the fedora lvm parition is selected gparted says "No lvm support at this time". I am using gparted through the pmagic (partedmagic) linux boot disk. I have almost the lastest pmagic (5.7) there is a pmagic 5.8 on source forge.
This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space.
Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!
I removed an ntfs partition I had in my HD and then resized my home partition with gparted to occupy all the available space. The resulting partition is supposed to be 129GB, and gparted/partition magic see that size. But the system does not, and all tools report the old partition size and the same free space I had before resizing.
I have a 230GB hard drive wich I don't know it's name.I have a 207GB windows vista partition and the rest of it is for linux (Ubuntu).Today I decided giving it all space to Ubuntu Linux ,but didn't want to lose all my data from the windows partition.I thought that by deleting all things except the folder with my data and leaving enough space to shrink and make enough room for another partition to put my data folder.The logic is that i could then format that partition wich previously was windows and use it all for ubuntu without losing data.After having ubuntu installed i could copy my data folder to /home and then delete the previous partition and make /home bigger.The problem is that after i freed the space,when using Gparted to shrink it says that the partition has bad sectors or the filesystem has problems and so it can't do some operations.
What could have went wrong?It told me to do chkdisk but as i deleted all the windows files and i can't boot into it anymore.I used the vista dvd to do that.I rebooted 2 times as it says and after that when trying again nothing changed.I tried to use ntfsresize with the --bad-sectors argument and also the -f argument but it's useless.At the end it says it won't do anything until the ntfs filesystem get repaired.Or it says it is too risky to continueIs there any way i could do some superforce command to resize it without losing data?Please don't tell me to put it on an external storage cause i have like 70GB of datas to save...no i don't have an external hardrive
I have 2 partitions: - Partition 1 = xp and ubuntu - Partition 2 = private matters (movies, pictures, etc.)
I successfully obtained 5 gb of unallocated space from xp I would like to add to my partition 2.
but inside gparted I can't partition 2 to increase, even though I have not mounted XP partition or 2 - I can only make 2 partition smaller and not bigger.
Is it because my swap partition is in the way or? I can not figure it out
Here is a picture showing my partitions: http://img713.imageshack.us/img713/3...reenshotcx.png
