I have a dual CPU system, where each CPU has 4G of associated RAM. I would like to know how to determine the logical memory address start of memory in the user address space for each CPU. I am running OpenMP, and have 16 threads, for a problem that parallelizes. What I would like to do is to be able to put half the data on each of the 4G, so that each processor will have half the data local, and thus reduce the amount of data transferred from one CPU to the other.
I have a fairly standard home network set-up with a router and a couple machines on the internal network (with private IP addresses 10.0.0.x). One of these machines is running my subversion server, which is in turn used by my laptop. I am now trying to configure my laptop in a way that I can have one working subversion copy connected to the repository which works both when the laptop is connected to my home network as well as if its connecting from internet. I configured a "virtual server" on the router, so that port 443 goes to the machine with subversion, and this works fine. Now I don't know how to configure the laptop to go to the same machine - because the IP is different if I want to access it from outside and from inside. I tried to connect to the external IP of my network, but the router refuses to let the connection go "out and in again". how to get it configured?
I am using Debian linux with wpa_supplicant on the laptop.
I am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)
I have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
Until now I have been running a single threaded cpu at single channel speed but yesterday I bought a 3.2 gig p4 for 20 bucks. It has hyperthreading and an 800 mhz fsb which supports dual channel speeds on the chipset. It hasn't arrived yet so I haven't put it in the system but what I would like to know is whether 11.4 work properly with these changes, and will it detect and implement them properly or will I need to reinstall it?
This is my first post in these forums. I'm still quite new to Linux (using Mint 9) so please bear with my not-very-articulate question(s)When I boot up and open up a tty terminal I get a message saying "Memory corruption detected in low memory." I've done an extensive google search about the issue and it seems not uncommon. I ran a memtest with no errors returned, so I'm sure that there's nothing really wrong with the memory; apparently it's a bug in the kernel that's causing this.
I found from command 'top' that 8GB memory are used. However, using command 'ps' with some options to grep the running processes and then summing up the memory used by the running processes are less than 2 GB. Where has the used memory gone ?
I have 2 xbee explorer USB boards hooked into my Acer Netbook running 10.04.e successfully mapped the /dev/tty/USB0 and set it up as com2 to use with X-CTU XBee software. It works. WHen I try to have a 2nd USB explorer board and do the same mapping thy both show as the same manufacturer so the same address(006). Even though the second reads as /dev/tty/USB1. Has anybody ran into this situation as well
It's more just straight networking rather than Linux related - possibly a rather large gap in my knowledge.Been asked to set up a Linux firewall / router for a friend, and he wants an external address on his PC and his firewall. He's got a /30... ISP seem to think this is normal. My understanding was different router interfaces should be in different subnets when it comes to addressing. eg:
WAN 1.1.1.1LAN 192.168.1.1/24 (then PC 192.168.1.2)This is how I'd set up an enterprise router, and from memory how I had to regurgitate networking for my Cisco exams. But they would have been large devices within a BGP environment, how does this compare to home use? Can you have interfaces on the same router within in the same subnet? I'm looking for the real world answer - not my CCNA answer or the config addressing scheme I just blindly followed...Is this right or can different interfaces be in the same subnet?If they can be in different subnets How would you do that with an eternal 1.1.1.1/30? egWAN 1.1.1.1LAN (what IP?) then PC 1.1.1.2Would you actually just set the router up as a /29 and then use the additional IP addresses for the LAN NIC on the router? (yes I'm aware you couldn't route to where it had actually been allocated)
Then with that how do I route the 1.1.1.1/30? Which interface do I point it at? Even with a /29 I'd still have a routing issue right?Or are the ISP expecting you to do something with NAT / port forwarding. (and yes I could do this to get it working - but I want to understand it better) I'm asking the question here, because rather than just wanting a magic file to get things working, I'd actually rather understand the principles rather than just press a button and have it work.
I'm not a developer or programmer just a user.I'm trying to install a packet radio system using Linux. The TNC is a Kantronics KPC3.The issue I'm having is the communications programs I have tried (minicom and cutecom) do not talk to the TNC. I'm using a computer that has a serial port and it is enabled in the BIOS.I have added myself to the uucp group in an effort resolve this issue.
I'm having some trouble addressing computers by name. I've just upgraded most my my box's to Lucid, and it was all working fine, but suddenly stopped - not quite sure why, or what I did, but I need it to come back! At first I thought it was my old router dying (which it was) but a new router hasn't helped.
I've now moved DHCP from the router to my server, and that's working fine, giving out static IPs from MAC addresses, and so forth, but I still can't address anything by name. My server is on 192.168.100.1 and called myth-server, if I
I'm wanting to set up a network. I'm still confused as to how to set it up. I think the easiest design is to have a switch on my border router.n this switch will be the servers. Also attached to this switch will be a Linux box. This will be a dedicated firewall. On it will be another switch. And the machines on the internal network will be attached to this switch. In the book "building Internet firewalls"(o'reilly) this set up is described as a screened subnet architecture. However the external interface on the Linux dedicated firewall will have to get it's I.P via dhcp (192.168.1.*) from the border router.
That or it can be a static I.P on the same subnet as the border routers dhcp range 192.168.1.*(but outside the dhcp range) but that would be trickier.The internal interface of this dedicated firewall would be static and on a different subnet as the external interface (192.168.2.*). Then this internal interface could give out I.Ps to the internal network that are on 192.168.2.*. If it did N.A.T for packets from the internal network then N.A.T would be being done twice; once by the Linux dedicated firewall and once on the border router, before going off to the net.Or is it a better approach to NOT do N.A.T on the Linux firewall and have all I.Ps on the whole network assigned as static(outside of the border router's dhcp range, but all on the same subnet(192.168.1.*))?.
Basically is there any point in the Linux box doing dhcp and N.A.T for hosts on the internal network?. I guess the answer is no. But i just wanted to hear your opinions, if you have the time. The border router is a home router. nted to have a normal triple-homed dedicated firewall and put it in the border router's DMZ but it proved unpredictable and tricky. So i just wondered what the best I.P addressing scheme would be for my newer way.
I'm running FC12 x64on a Dell PE2950 to host some virtual guests, but FC12 host drops CPU errors (IERR asserted) and reboots whenever CPU utilization jumps above 30-40%. Found mention here from end of 2007 checked /proc/cpuinfo and DO have the 38 bit addressing processorsDoes anyone know if there's a kernel module I can load or am I going to have to custom build a kernel with that module available? What mod is it?
I've got a problem occurring with my openSUSE 11.3 // GNOME Empathy Chat Client. When I try to connect to my Facebook account, my client tells me that I have a Network Error. Last time I used the client at home, it worked perfectly fine, but when I'm at work it doesn't.
Now, you guys may say that my work's network may have ports blocked, or the firewall is blocking its use in some way, but I find that hard to believe. My reasoning? I am able to connect to my Facebook account thru Empathy at work on my previous Ubuntu 10.04 system with no problems. I have also been connected to the same chat accounts this whole week on my openSUSE 11.3 // KDE 4.4 Kopete chat client.My Empathy connects to my Skype with no problem also. So, do any of you have any ideas that could possibly solve my issue? I love being connected to my Facebook chat at work because I don't see anyone nearly as often, and it's a great way for me to keep in touch with them.
I'm wanting to set up a network that has a simple screened subnet architecture. The boarder router will have a switch plugged into it. My servers will be plugged into this switch. Also plugged into this switch will be a dedicated firewall. This firewall will protect the internal network. The boarder router is not very flexible. You can have hosts that use dhcp but that get the same internal I.P address each time their interface is configured.Or you can configure static I.Ps on hosts that are outside the dhcp range of the router, but that have the same subnet address.
The most simple way to set up such a network would be for every interface to have a static internal address that is obtained via dhcp from the boarder router. Like i said the boarder router is doesn't give you much freedom. Meaning that it lets you have a static internal address but not a different network address for different interfaces. That is where the confusion is, for me. If all the interfaces that get theirI.P addresses from the boarder router are on the same network, then what about the systems on the internal network. They might as well get their I.Ps from the boarder router as well, to avoid NAT being done twice before their packets get sent out to the Internet?.I wanted a three interface firewall to separate the DMZ from the internal network, instead of using a screened subnet architecture, but the boarder router only allowed one interface to be in the DMZ, i think and it didn't seem to have a well designed way of controlling the DMZ ie setting a new default gateway etc.
Should i let NAT be done twice for packets from the internal network i.e have the dedicated firewall do dhcp and NAT for the internal network, but this firewall's external interface have a static internal I.P from the boarder router, and the internal I.P of the dedicated firewall have a static internal I.P from the router as well?. It looks like all the interfaces have to have the same network and subnet address, except the machines on the internal network(which can get their I.P from the dedicated firewall)
Why does a NIC need a permanent individual way to distinguish it? Why not give it the host name in a form that is not a permanent hardwired hardware? Seems that the last ethernet router before reaching your PC is really seeking your NIC. So why is not the expression "What is your NIC Address" instead of "What is your IP Address"?
I cannot get static addresses to work on eth0 and eth1. eth0 seems to use DHCP while eth1 uses the static information. Sometimes the static info is used but the interfaces get the addresses reversed.
From /etc/sysconfig/network NETWORKING=yes HOSTNAME=mosaic
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
I am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.
I am new to C and linux. My code below does arbitary writes but I cant figure out where or how it does it.
I am calling the insertNode() function with seq = 'MISSISSPPI$' and alphabets = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ$'
Code:
Weird behaviour I should mention is that when I check for NULL pointer in node->child[index], the unassigned values are not null anymore, they point to arbitary memory.
we found that if we use 'top' to show the memory usage of a server (SuSe Linux 10), we can get virtual memory usage as well as 'Resident memory' usage. For virtual mem or a particular process, it is around 1.1GB, which is large but for resident memory, it only consumes 300MB. Are there anyone who knows what the differences are? I would also like to know whether the difference (1.1GB - 300MB) = 800MB are actually available for use by other applications in the system.
I am monitoring physical memory in a server I administer, and my hardware provider told me they had increased physical memory size to 4Gb... However, using several tools (free -m; top; dmesg | grep Memory; grep MemTotal /proc/meminfo I discovered that I actually have 3Gb, not 4... But, my doubt comes from the fact that dmesg | grem Memory tells me I have 3103396k/4194304k available The first number is effectively 3Gb, but the second one, is 4! so, why I am looking at this two different numbers?
I have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.
I am writing an application that wants to access periphals registers outside the standard (allowed) memory area.
Doing so gets me "segmentation fault".
I know, this is natural behaviour.
One way of getting around this is writing the module which has to be loaded by linux. I will consider this some time later.
For now, I want to come to some quick result and allow linux or gcc compiler to write to those memory areas of periphals. Is there a direct way to do so?
