General :: Kill All Processes Except Shell Window?
Aug 3, 2010
i was referring to an article given in following website.[URL] I was surprise to know that i can kill all running processes by using kill 0. However when i tried running the command nothing happened.
my machine details:
Code:
# lsb_release -a
LSB Version: :core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: EnterpriseEnterpriseServer
Description: Enterprise Linux Enterprise Linux Server release 5.2 (Carthage)
Release: 5.2
Codename: Carthage
View 4 Replies
ADVERTISEMENT
Oct 19, 2010
I am trying to write a script which when executed should kill all currently running cat processes.
View 1 Replies
View Related
Dec 14, 2010
if i do a
ps aux | grep ftp
that would show me at least any active ftp connects started with the ftp command, right? Is there then a way to use that to somehow kill any stuck sessions that are older than an hour?
View 9 Replies
View Related
Oct 28, 2010
I am developing a daemon that is acting up and I am now unable to create any new processes (ie. I cannot start a new process to kill the other rogue processes). So, I need to be able to kill the processes from a remote machine. How do I do "kill" remotely without admin privileges? If I cannot kill my own process from a remote machine as a normal user then tell me so I can mark it as the correct answer.
View 3 Replies
View Related
Aug 26, 2009
I've run into what is apparently an age-old SSH problem, which is that killing an ssh client process does not kill the remote process (unlike e.g. rsh). There seem to be lots of patches and a couple of open bugs on this topic that have been there for about 10 years or so... Having convinced myself by googling that there is no easy solution, I'm now looking for a workaround of some sort. I'm writing a testing framework so the processes I'm running remotely could be anything at all, i.e. I only have control of the client side. Also the remote processes are of course highly unstable and I need to be able to terminate them if they hang. ssh -t won't work for me as I don't necessarily have a terminal. Finding the remote process ID would be enough so I can do ssh <machine> kill <pid>, but I don't see any way to do that either. Just using ps, pgrep etc seems to suffer from not being able to uniquely identify the correct process, and killing the wrong process is of course very bad.
View 14 Replies
View Related
Nov 18, 2010
All the kill idle user processes scripts I've seen don't take into account that the user might have multiple sessions open. Such is the case with one of our clients. Currently, every hour or two I need to do the following:
This will get the TTY and idle time for all users.
For each idle time over a half hour, I do the following (TTY is the TTY from the previous command with a space.
I then kill those processes.
There must be a way to do this automatically in a bash or perl script. I've tried both, but can't seem to get things to work properly.
View 2 Replies
View Related
Aug 14, 2009
I'm attempting to use 'killall' to kill all mysql processes, however after using the command mysql processes are still alive. 'killall mysql' says no processes were killed, and while 'killall mysql_safe' gives no message there are still mysql processes alive afterwards.
Code:
# killall mysql
mysql: no process killed
# killall mysqld_safe
[code].....
View 3 Replies
View Related
May 3, 2010
I don't know about your computer but when mine is working properly no process is sucking 95%+ over time. I would like to have some failsafe that kills any processes behaving like that. This comes to mind because when I woke up this morning my laptop had been crunching all night long on a stray chromium child process.
This can probably be done as a cron job, but before I make it a full time job creating something like this I'd thought I should check here. :) I hate reinventing the wheel.
View 1 Replies
View Related
Feb 11, 2011
I issue the command ps -aux | grep tony. It displays the following output
tony 10986 0.0 0.0 33532 464 ? S Feb01 0:00 vncconfig -iconic
tony 10988 0.0 0.0 86012 512 ? S Feb01 0:00 twm
tony 15553 0.0 0.0 92404 1848 ? S 10:34 0:00 sshd: tony@pts/34
[code]....
View 3 Replies
View Related
Jun 18, 2010
How to tell the kill command to ignore processes if that process is not alive?
For example: 3453 is an alive process but 44534 is not.
kill -9 3453 44534
View 4 Replies
View Related
Jul 28, 2011
How to kill the processes accessing Internet in background using terminal commands.Command to stop (disconnect) the processes accessing Internet.Command to kill the process accessing Internet.
View 1 Replies
View Related
Dec 16, 2009
I thought 'killall' would work, but I need to provide the "command" to kill. I'm really looking for a command that will kill all processes that have a particular file/directory open. Currently, my script fails on an 'umount' because there are several processes that have this filesystem open. The command 'lsof' is a good tool to determine which processes have a filesystem open, but I don't really want to write a script that parses through the 'lsof' output to capture PSIDs. Is there a linux command that can kill all processes that may have a particular filesystem open?
View 2 Replies
View Related
Apr 28, 2011
how do I detect and kill zombie processes left from the command line of a Linux terminal?
View 3 Replies
View Related
Sep 22, 2010
I have an issue on one of my servers whereby the [normally very helpful] du and tar programs are somehow using up too much or my system resources (du 40% mem, tar 20% mem) and causing problems. I am after a command which is able to kill a process without knowledge of a PID but by process name e.g. "du" and memory usage e.g. >= 10%.
Something along the lines of:
kill $(pgrep du) grep %MEM > 10
Although I know that is invalid syntax I cannot fathom the correct/best way to achieve this end!
View 9 Replies
View Related
Dec 3, 2010
I have my code with my fork in a server and each time a client connects one more process is created. i use this code for the handling of zombies
void sig_chld(int signo){//Diadikasia gia tin diagrafi twn 'zombies'
signal( SIGCHLD, sig_chld );//signal gia ton entopismo tou zombie
pid_t pid;
[code]....
but i need the server to kill each zombie after the client is disconnecting and not to have to press ctrl+c
View 1 Replies
View Related
Nov 18, 2010
how to even start this Perl script. I have the following processes:
Command used to get this info:
ps aux --forest | grep -e process_name -e ksh | awk '{if ($1 == "user1" && $1 != "root" && $1 != "UID" && $1 != "xfs" && $1 != "mfg" && $1 != "mfgnet") print $0}'
Processes
user1 2819 0.0 0.0 4272 612 ? S Nov17 0:00 \_ -pksh-ksh
user1 2820 0.0 0.0 64956 1584 pts/833 Ss+ Nov17 0:00 \_ -ksh
[code]....
I need a way to kill off the pids 2819, 2820 because they do not have a process tied to them like pids 2918, 2922 and 6657. The way it works is peek shell (pid 2918)is opened then it starts a ksh (pid 2922) session then from there the end user runs a command (pid 6657).
View 7 Replies
View Related
Dec 15, 2010
I'm trying to avoid kill -9 for the reasons described in the Useless Use of Kill -9 form letter. Is this function sufficient, or do I need to kill the kill processes after a timeout or take care of other subtleties?
soft_kill()
{
# Try to avoid forcing a kill
# @param $1: PID
kill $1 || kill -INT $1 || kill -HUP $1 ||
(echo "Could not kill $1" >&2; kill -KILL $1)
}
As an aside, what's a better name for this function? The current name reminds me of "Killing Me Softly", and manslaughter sounds a bit severe. Maybe spoon_kill (Google it)?
View 2 Replies
View Related
Nov 25, 2010
How to run a run a shell script in background even if i exit the terminal or logout,
the process end only when i kill with command kill
View 5 Replies
View Related
Jun 15, 2010
I'm working with Eclipse and it's starting to misbehave now and then which completely freezes my computer. Is there any emergency command to kill such a misbehaving process so I don't have to reboot my computer?
I already have a emergency xkill icon in my taskbar and a [Ctrl]+[F1] console with "> sudo killall eclipse" pretyped(!) but sometimes it's even to late for this. What I would need is a emergency command/console that gets a guaranteed amount of process time so I can kill these process.
View 4 Replies
View Related
Oct 21, 2010
User 1 and User 2 each start a mono process with sudo:
"sudo mono user1.exe" "sudo mono user2.exe"
Each user has a kill.sh in their directory, which is being called by user1.exe/user2.exe to kill the process.
The script itself is
ps aux | grep 'mono user1.exe' | awk '{print $1}' | xargs kill
which in theory should pull *only* the PID of "mono user1.exe" and kill only that. The problem: It kills any and every single instance of mono that is running on my system, every userx.exe thats open. I am confused, as a simple "ps aux | grep 'mono user1.exe'" does only return the mono user1.exe process and not the others. "ps aux | grep 'mono'" returns them all though. how I can modify that script so that it only kills the specific process? Would "pkill -9 -f 'mono MCuser1.exe'" work as well - or would it too kill every instance of mono? I cant do a lot more of trial and error, its not good I am killing those instances accidently...
View 14 Replies
View Related
May 20, 2010
how to write a shell script the searches for processes running on my system. I really don't know where to start. can anyone give me a hand and explain how the script works?
View 3 Replies
View Related
Feb 5, 2011
how to list the currently running processes via code a shell script. FYI i now about the top method in the terminal but i need a way to have it via a shell script.
View 4 Replies
View Related
Aug 10, 2010
The only way I know is to use exit command to come out.
Is there some way to close the Xterm windows using the GUI (the mouse pointer)? Killing a lot of windows would be easier that way.
I am using Tiny Window Manager.
View 2 Replies
View Related
Apr 12, 2011
i want to remove a path, but is in use.. How can i kill the zombie processes?
[Code]....
I guess i was wrong deleting first the disks that formed the path, but now how could i kill those zombie processes without a reboot?
[Code]....
View 2 Replies
View Related
Jan 3, 2010
Before I was forced to delete (actually rename) my .gnome2 directory in order to get a fresh start, I had an icon on my panel (task-bar? SSSsssss ) that would kill the next window that I clicked. Useful when a program stops responding.My problem: Rebuilding my panel, I don't recall the name of that utility. I had originally copied it off one either the Applications menu or the System menu but I can't find it now.My questions:What is the name of that kill-next-clicked-window utility?What directory (presumably some place under .gnome2) holds the links to the programs on the panels? My search under the renamed .gnome2 directory yields a lot of nearly empty directories and nothing I can identify as my objective. (In case I get it into my head to manually edit the panel - not likely.)
View 8 Replies
View Related
Jan 3, 2011
Which are the right commands for start and kill the X window using cmdline?
View 3 Replies
View Related
Nov 15, 2010
My server pretty often becomes full up php processes running which are not needed.Is there a way to search for and kill any php process that is more than 3 hours old? as I understand it, i need to use ps piped with awk. awk at the moment seems very complicated to me, do not how to start tackling it.
View 5 Replies
View Related
Feb 12, 2011
When I try to launch application which runs in another window (not inside shell), it always fails with this kind of message: (example from gnome-terminal)
Code:
** (gnome-terminal:2477): WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported Failed to get the session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Falling back to non-factory mode. Failed to summon the GConf demon; exiting. Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I am running it as root, have GNOME installed and running, and also fresh install of gconf.
View 8 Replies
View Related
Feb 3, 2010
I am using Linux on my system. I don't have gui for my system, only console is there.
I have some task to create a menu box window using dialog in shell scripting.
I have to take input from user & save it in a file.
But this should like html form as e.g.
Name - .....................
email id - ..................
phone - ......................
location - ...................
Submit Cancel
Such window should be displayed on console using dialog & then user will enter his information there as Name,email id, phone,etc & submit it, then it gets saved to a file. Here submit & cancle are buttons. I have to do it in bash shell scripting. Or give me some examples like the above with shell script code.
View 1 Replies
View Related
Jun 11, 2010
I was giving the found the following shell script. I was told it was suppose to ensure only that only one script of Test.sh can run..
However, I get it looks like it has a error when i run it... As i get Test.sh: line 9: kill: (20831) - No such process
what is going on in this script can someone explain it to me... I thought it suppose to work like a singleton for my script creating a file .run-test-sdolan. However, i don't see how or where .run-test-sdolan is create?
sdolan@staging:$ vi Test.sh
#!/bin/sh
MYDIR=`dirname $0`
CONFDIR=$HOME/
code....
View 4 Replies
View Related
