General :: Installing .tar.gz Software - Saying There Is No Such File Or Directory
Jun 22, 2010
I am installing one software (pwDesktop [url])
I am using ubuntu 10.04
I am following these stapes:
But it saying there is no such file or directory.
View 12 Replies
ADVERTISEMENT
Mar 10, 2011
So I have patched the 3.2 sources similar to the 3.1.3 sources. I used the slackbuild from 3.1.3 as well. I get to the install of the script and I get this:
Code:
...
running install_egg_info
Writing //tmp/SBo/package-python3/usr/lib64/python3.2/lib-dynload/Python-3.2-py3.2.egg-info
Creating directory /usr/man
Creating directory /usr/man/man1
/bin/ginstall -c -m 644 ./Misc/python.man
/tmp/SBo/package-python3/usr/man/man1/python3.2.1
cp: cannot stat `Demo': No such file or directory
I can't build Blender anymore without this update.
View 7 Replies
View Related
Aug 22, 2010
i'm brand new to linux and honestly don't know how to use it very well and i am trying to install java, following the directions is not working i am stuck at Code: chmod a+x jre-6u<version>-linux-i586-rpm.bin it says bash: version: No such file or directory i downloaded the software to the downloads folder firefox uses as default.
View 6 Replies
View Related
Jul 31, 2011
I m using Ubuntu 11.04. I have USB modem MMX 300C HSIA Rev.A (BSNL) I m getting problem in installing wvdial. I have done following steps :
1) I have installed following packages in that same order:
libxplc0.3.13
libwvstreams4.4-base
libwvstreams4.4-extras
libuniconf4.4
wvdial_1.60.1+nmu2_i386
2) Then I run wvdial command but getting following o/p
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
[Code].....
View 1 Replies
View Related
Feb 2, 2010
I am attempting to install Xemacs-21.4.22 on Centos 5.4 and get the following error message when I attempt to... make install
..........
xlwmenu.c:39:28: error: X11/bitmaps/gray: No such file or directory
xlwmenu.c: In function 'XlwMenuInitialize':
xlwmenu.c:3015: error: 'gray_bits' undeclared (first use in this function)
xlwmenu.c:3015: error: (Each undeclared identifier is reported only once
xlwmenu.c:3015: error: for each function it appears in.)
xlwmenu.c:3016: error: 'gray_width' undeclared (first use in this function)
xlwmenu.c:3016: error: 'gray_height' undeclared (first use in this function)
make[1]: *** [xlwmenu.o] Error 1
I understand that there are some X11 bitmaps not included in Centos 5.4 however I have no idea how to install them.
View 6 Replies
View Related
Apr 21, 2011
Can't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
View 6 Replies
View Related
Jun 10, 2010
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
View 5 Replies
View Related
Jan 25, 2010
I'm trying to install Slackware package into some specific locations, like for example, I want to put Linux base package into at / and put applications on /usr/local. However when I'm installing using "setup" program, I cannot find a part that let me to choose the installation destination.
At "setup install" option, it gives six different installation method like full, newbie, menu, expert, custom, and tag path. But none of them (I cannot find it) gives an option where to put the installation package to.
View 2 Replies
View Related
Mar 28, 2010
I'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
/usr/lib/libgtk-x11-2.0.so.0
View 6 Replies
View Related
Mar 10, 2011
I was doing a tutorial on scripting in bash. I saved my file on the desktop and I cannot seem to get to that file to execute it. Here is what I have been using:
I try cd Desktop says that there is no such directory.
I tried /home/me/Desktop same thing.
View 5 Replies
View Related
Jan 19, 2010
I've recently installed Puppy Linux on a "second-hand" machine, and I'm trying to get gcc installed so that I can (hopefully) compile some wireless drivers for the USB adapter I'm trying to make work.
I've tried everything I can think of, including following the instructions on the Puppy website. When I click the devx_430.sfs file, it simply fails to mount ("Failed mounting or unmounting."). So I tried getting the gcc and make packages (+dependencies) from the Ubuntu repos, and install those (Puppy has an "undeb" utility). There are actually supposedly two ways of doing that: one is to click on the file in ROX-Filer, and that opens a confirmation dialog to install, so I tried that first (with all the .debs). That seemed to report a successful installation for each package (confirmation dialogs popped up to report installation success), but when I tried typing "gcc" in the terminal, it still couldn't find it ("bash: gcc: command not found").
So then I tried the second way: using "undeb" in the terminal. That again was supposedly successful (no errors), but still "bash: gcc: command not found" and "/usr/bin/gcc: No such file or directory".
So then I tried "file /usr/bin/gcc" and it gives this:
Code:
/usr/bin/gcc: broken symbolic link to 'gcc-4.3'
And of course, as expected, "find / -name "gcc-4.3" finds nothing.
Where are these files being extracted to, if at all? And I can't just use the package manager, because I don't have internet (this is how I'm trying to get internet). Am I totally screwed?
View 5 Replies
View Related
Jan 30, 2011
I want to do the following.
1. have a directory full of subdirectory
2. Pick the first file from every sub and copy that to the main directory and also rename that file to the same name as the subdirectory's name
3. need to work in commandline best is a simple script.
View 4 Replies
View Related
Dec 23, 2010
I want to install a program (specifically metasploit), and have it accessible from any directory in the terminal. I have it installed correctly, but I have to travel to the directory it is installed in to run it (by using ./msfconsole ). I want to be able to be in any directory and just run "msfconsole" and have metasploit run. I have to copy the metasploit folder to the /opt/ directory? Maybe the /usr/bin/ directory?
View 3 Replies
View Related
Jul 19, 2010
I have a remote Debian 5 machine on which I'm trying to extract a tar-file (Django 1.2.1, but that's unimportant). The first 1300 or so files extracts just fine (of about 2800 in total), after which errors liketar: Django-1.2.1/tests/urls.py: Cannot open: No such file or directoryshows up for the rest of the files, finally ending up with atar: Error exit delayed from previous errorsI use the commandtar xzvf Django-1.2.1.tar.gzI've also tried with sudo (but I'm extracting in my home directory, which I should obviusly have permissions to use without). I've tried gunzipping first (runs flawlessly) and then running tar xvf, but to no avail. I've fetched the file using wget:
View 1 Replies
View Related
Aug 18, 2011
I am installing a program on a server as a non-root user. Specifically it is tmux 1.5, but this should apply broadly to all locally installed program in my opinion (I mention the program name in case this problem ends up not being my own error).
The program requires me to install some dependent libraries (e.g. libevent and ncurses). So, I installed them both locally since I do not have root access
cd $HOME/library/installation/folder
DIR=$HOME/local
./configure --prefix=$DIR
#... make ... make install
[Code]....
Ok, so this installs the program without problems into $HOME/local/bin, but if I run the executable: $HOME/local/bin/tmux , I get the following error:
tmux: error while loading shared libraries: libevent-2.0.so.5: cannot open shared object file: No such file or directory
It would seem to me that the program cannot find the desired libraries, but the file libevent-2.0.so.5 does indeed exist in $HOME/local/lib as specified in the configure options. I am wondering how I can get the program to recognize the installed library in order to run. I tried putting symbolic links in $HOME/lib, $HOME/bin, and $HOME/local/bin, but none of these worked.
View 2 Replies
View Related
Apr 22, 2010
I am running Ubuntu 9.10 and had hoped to use Synaptic to find and install Truecrypt. As Synaptic couldn't find it I downloaded it from [URL]. In case it helps the file is called "truecrypt-6.3a-linux-x86.tar.gz". Apart from not knowing how to get a working program from the .tar.gz file, I don't know whether the installation process sorts out where the file should go and puts it there, or whether I have to create a directory for it and put it there myself.
View 11 Replies
View Related
Mar 13, 2011
the contents of the folder could not be displayed Error stating file '/etc/x11': No such file or directory
View 2 Replies
View Related
Jul 6, 2010
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <usb.h>
int main(int argc, char **argv){
struct usb_bus *bus;
struct usb_device *dev;
usb_init();
[Code]....
I am compiling this code gcc libusb.c -o libusb -lusb but it saying error as usb.h: No such file or directory
View 3 Replies
View Related
Apr 22, 2011
where can i get socket.h header file? will copy pasting this header file in 'incl' directory allow me to use it in the my program?
View 1 Replies
View Related
Apr 21, 2011
Im trying to extract the contents of a zip file but I want to extract it to my own directory. I'v tried -d from unzip but that just puts the contents of the zip into that directory.
But I want to extract the contents of the first (root) directory in the zip if there is only one directory in the root of the zip else just extract the files/folders in the root of the zip file (if there are more then one files).
e.g. test.zip contents the following dir structure:
test.zip
/app_v1/ <-The contents of this directory I want extracted to a dir of my choice
- folder-1
- folder-2
- folder-3
- folder-4
- file1
- file2
View 2 Replies
View Related
May 6, 2010
trying to unzip only 1 directory in my .zip file, the reason is that i don't have enough space to unzip all the contents of .zip file. and i am trying to do it with unzip command.
View 4 Replies
View Related
Jan 14, 2010
My present working is
Code:
linux:/home/anisha/downloads/mapnik-0.6.1/demo/c++ #
Now I want to run "python scons/scons.py" located in
Code:
linux:/home/anisha/downloads/mapnik-0.6.1/ #
I tried
Code:
../../python scons/scons.py
From the above stated PWD but it resulted in the following:
Code:
bash: ../../python: No such file or directory
What is the way to execute a file of some other directory from the PWD!
View 14 Replies
View Related
Jul 21, 2011
If I type su, it gives me following error su: No such file or directory
View 5 Replies
View Related
Sep 20, 2010
While thinstation is booting from localdrive then the shows repeatedly error displays after line welcome to thinstation cat: /tmp/ts/session not such file or directory even that i have kept file in loclal derive thinstation.profile/thinstation.conf.user
View 1 Replies
View Related
Apr 26, 2011
I have create a perl script, which create a text file, and it works well. But i want this to create in a specified directory.
THe scrip is:
Code:
#!/usr/bin/perl
use POSIX;
#Directory where the text file will be created.
$directory = '/space/data';
[Code]....
View 14 Replies
View Related
Mar 28, 2011
How do I extract a tar file from one directory to another.
e.g /data1/test.tar to /data2
View 7 Replies
View Related
May 19, 2011
I am having troubles starting superPI benchmark test on Linux. I have it in a file named 'super pi' so ./super_pi doesn't work. I can't figure it out how to do it. In cmd(Win) I would do it like this
cd C:/super pi/
super_pi
If the file would be located in C:/super pi/ The problem is I somehow can't tell the path to the file.
View 9 Replies
View Related
Mar 2, 2010
[ --exclude FILE ] [ -X, --exclude-from FILEI tar to tar some directory and exclude a directory , I tried tar -cvf /tmp/test.gz ./* --exclude ./temp but not work , and the parameter --exclude seems exclude file only not directory , can advise what can i do
View 1 Replies
View Related
Feb 2, 2010
I have a directory , there are many files created in it , I want to use the command to move the files which elder than 30 days and gzip it and then move it to /tmp , and then remove those files , I tried use below command but not work.
find ~path -type f -mtime 30 -exec tar -zcvf - {} --remove-files > /tmp/oldfile.tgz ;
View 1 Replies
View Related
Jun 30, 2010
I copied g95 executable under /usr/bin which is clearly in my PATH. When I type g95, it says "bash: /home/username/bin/g95: No such file or directory". Why doesn't it look for somewhere else that is in my PATH?
View 5 Replies
View Related