I am trying to install gtkgraph-0.6.2, but when i try to "make" it, it gives some errors :
student@student-desktop:~/Desktop/gtkgraph-0.6.2$ make
make all-recursive
make[1]: Entering directory `/home/student/Desktop/gtkgraph-0.6.2'
Making all in intl
make[2]: Entering directory `/home/student/Desktop/gtkgraph-0.6.2/intl'
[Code]....
i have tried with the older version also but same error was there. I am using ubuntu 8.04
Trying to get a total of the memory consumption for the httpd process. The 10th column is displaying the % used. Just wondering how the summed value is able to get over 100%?
[root@vps htdocs]# /usr/bin/top -n 1 -b | grep httpd | awk '{SUM += $10} END {print SUM}' 151.9
[root@vps htdocs]# /usr/bin/top -n 1 -b | grep httpd | awk '{SUM += $10} END {print SUM}'
[code]...
I am using linux and I want to use FTP for linux but its not working with me is there any file for modifying to work with FTP?
View 14 Replies View Relatedi use redhat v 5.3. yum is ok on my laptop. but when i try to install gcc compiler, it shows many dependencies. but normally it is not supposed to show any dependency while installing with YUM...but i can install other package with yum.
View 4 Replies View RelatedI recently installed ubuntu 11.04 on my Aspire One netbook, I installed using my usb drive. The operating system installed correctly however, the usb's no longer workBefore installing Ubuntu I had Windows 7 Starter but now they do not. Is there anything that I can do to get them working again.
View 1 Replies View RelatedI'm new to Linux. And I tried using the at command to echo "Hello" after 2 minutes and I saw the following.-$ at now + 2 minutes-at> echo "Hello"-at> <EOT> job 7 at Tue Aug 9 23:59:00 2011So far it hasn't worked. I'm trying to get used to the syntax. Am I missing something?
View 1 Replies View RelatedI'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:Code: # uname -aLinux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
# cat /etc/issue
CentOS release 5.4 (Final)
Kernel
[code]....
I installed gcc using command yum install gcc and i learned that when i will type g++ -v it will show the version of the gcc but it displays command not found. Whats wrong i am not able to compile my CPP program. compiling my cpp program which is in / dir. i am running the command g++ -v as su.
View 2 Replies View RelatedI am using DSL thru QEMU. I was able to install it to a hard drive image.I started the SSH Service but I'm not able to connect to it from my Win 7 box via putty. I've edited the hosts.allow file to ALLOW external usersI've turned on the 22 port on my win 7 box firewall.
View 1 Replies View RelatedRecently i install fedora 13 on my dell laptop 1555 , and got to know that the bluetooth of my laptop is not working , when i click turn on bluetooth nothing is happen . u guys share our skill how can make my laptop bluetooth working
View 1 Replies View RelatedI am trying to grep for A records in a bind zone file but I am failing.I am trying: grep "s+As+" db.domain.comBut there are no results.
View 12 Replies View RelatedI am wanting to install ubuntu 10.10/mint 9 onto my existing system, while allowing the old distros to boot.My setup is mirrored mdraid. Never had any issues before with grub picking up my old systems, but grub2 just isn't working.I've installed mint OK and it boots fine. But the main grub menu doesn't show, it just boots straight into mint.This includes the rescue entries in the menus - it neither shows them or any custom entries.If I run a test in virtualbox without using raid it picks up my old suse distro no problem and gives me an entry at boot.But using md it wont.
View 6 Replies View RelatedI have installed Ns2.33 and added the patch mobiwan-1.patch. when i tried to run nam, the following is the error i got
manju@manju-desktop:~/Desktop/ns-allinone-2.33/ns-2.33$ nam
nam:
[code omitted because of length]
: no event type or button # or keysym
[Code]....
I just upgraded my ubuntu to 10.10 and discovered that the navigation keys in the 'less' utility are not working anymore. Both the cursor keys and the page keys are just echoed as key codes:
Code:
:^[[A^[[B^[[C^[[D^[[5~^[[6~
(I hit up, down, right, left, pgup, pgdown)
This is really nasty - moreover, this issue seems to be too difficult to google (at least for me) beause 'less' is not a very good keyword to search for
PS: I already checked TERM=xterm -- must be something else...
I want to play with CUDA/PyCuda, but nvcc doesn't work with GCC version 4.5 or greater. What is the most thorough way to provide access to GCC 4.4.6 without impacting my version 4.5.2?
View 3 Replies View RelatedI've noticed that, I can not copy a file trough scp .here is an example:
[root@Radius ~]# scp 123.txt /etc/logrotate.d/radiusd.log "nasser@192.168.8.46:/tmp"
nasser@192.168.8.46's password:
[root@Radius ~]#
[code]....
I'm trying to restrict ssh connection using xinetd , so my xinetd configuration files are :
/etc/xinetd.conf
Code:
defaults
{
[code]...
None of the apps will work on DSL. Example Firefox or notepad will not open. FF says input/output error. it is a compaq presario laptop with win xp sp3 in case that is important. I am not sure if the windows reference is important at all?
View 14 Replies View Relatedin my system browers rediff works proper,but all other sites facebook gmail yahoo which require username password not work, i can't open mail open account can't open any mail or link in them.this problem with all browers like mozilla,operea,crome. i install unbuntu redhat centos but all of browers have this same problem.
View 1 Replies View RelatedI am trying to install gstripchart-0.3.0, but when i try to "make" it, it gives some errors :since the error is too long i can show some of these:
/usr/local/include/gtkextra/gtkplotbar.h:64: error: gtk_plot_bar_get_width declared as function returning a function
In file included from /usr/local/include/gtkextra/gtkextra.h:47,
[code]....
My Windows XP PC crashed and died. I tried to restore it, but it asks for a system file I don't have. I thought I could start up with the Linux0S2007 CD, but it doesn't seem to recognize the CD drive either. Is there a code or keyboard entry I could use to run my PC off of the Linux CD without Windows working? I have not installed Linux on this PC.
View 12 Replies View RelatedSo I thought I was getting the hang of networking stuff, but, apparently not. Anyhoo, I have a startup script (very basic one liner)ifup -a Reading the man page for ifup it says this should bring up all devices listed in interfaces file (so contained in there I have):After starting my machine I run ifconfig which returns no output.If I do ifup eth0 I get: ifup: interface eth0 already configured.So finally, if I run dhcpcd this brings up my nic. If I then do ifdown -a and kill the dhcpcd process and then manually type ifup -a, it all magically comes back.Would someone explain what step I am missing in the process to have all my cards startup as part of the boot process?
View 11 Replies View Relatedi have to set up a alias like:alias ll='ls -l'them ll will work
View 2 Replies View Related1.Today morning when I started FC9 all my Windows-xp' s drives were properly mounted; I inserted a USB drive and that was mounted properly.
2.After that I was trying to install qtsdk and it was facing some problem.I was tensed and removed my USB drive without Unmounting.
3 Then I rebooted my machine, now neither my Xp-partitions nor my USB drive is getting mounted.
4. I opened the file /etc/fsatb and added a line there: /dev/sda2/mnt/Folder ntfs
5. did mount-a
6. The error message I got: mount: can't open /etc/mtab for writing: Stale NFS file handle
7 I tried to open mtab file [B]Could not open the file /etc/mtab
I have RHEL Machine which has NFS mounted locally.Code:#showmount -e localhostlocalhost:/apps/ImagesS on /mnt type nfs (rw,addr=127.0.0.1)When I am tying to copy a file from /tmp directory to /mnt/themes it reports "Operation not permitted".
View 5 Replies View RelatedI have installed Ns2.33 and added the patch mobiwan-1.patch. When I tried to run nam, the following is the error I got:
manju@manju-desktop:~/Desktop/ns-allinone-2.32/ns-2.32$ nam
nam:
[code omitted because of length]
: no event type or button # or keysym
while executing
"bind Listbox <MouseWheel> {
%W yview scroll [expr {- (%D / 120) * 4}] units }"
invoked from within
"if {[tk windowingsystem] eq "classic" || [tk windowingsystem] eq "aqua"} {
bind Listbox <MouseWheel> {
%W yview scroll [expr {- (%D)}] units }
bind Li..."
[my virtuale machine(linux4) not sync with ntp server
dmeg show :
ntpdate give err. ntpdate -q 10.3.71.11 server 10.3.71.11, stratum 0, offset 0.000000, delay 0.00000
11 May 15:10:56 ntpdate[21183]: no server suitable for synchronization found
I have Ubuntu 10.04LTS installed and want to get TV-OUT working so I can watch movies and stream media from the internet to my TV. The hardware I have installed is:
Nvidia GeForce2 mx400
TV is an old analogue CRT one
I know its an old graphics card and TV but the whole computer is put together from spares I have knocking around. So I have Ubuntu installed and the Nvidia proprietary drivers installed, version 96. Through the nvidia-settings application I have managed to get a picture in colour onto my TV screen, but the problem is there is about a 2 inch black boarder around the screen and also like a grey shadow over the entire screen. So I tried the NVTV application, the same thing happened again with the black boarders around the screen but the grey shadow over the entire screen had gone, so the black boarders are actually black and the colours show up properly.
So is there a way to get rid of the black boarders and grey shadow (if it decides to show up again), I am a total newb to Ubuntu but loving it so far and this is the only problem I am stump on so far. This is my X Config FIle I have with all the settings I have to get to the above point:
[Code]....
I installed the pack and ran the commands and it showed it connected. I closed the terminal windows. And went to firefox unchecked work offline but firefox will not reconized easytether connection.
View 7 Replies View Related