General :: Getting An Error During Compiling Cannot Find "gtk/gtk.h"?
Jan 20, 2011
I am try to compile and install the as31 program development for the 80c51, but I am getting an error during compiling cannot find "gtk/gtk.h" I downloaded it from /www.pjrc.com/tech/8051/.I send an email to "paul@pjrc.com", he toll me to install gtk1.2-dev indicating that, On Ubuntu, the command is: "apt-get install libgtk1.2-dev"it still produces the error. I am using an HP laptop zv6000 running Fedora 14 and appears that gtk2 and gtk3 is installed This is the result:
[Vinny@HP1 ~]$ apt-get install libgtk1.2-dev
bash: apt-get: command not found...
Install package 'apt' to provide command 'apt-get'? [N/y]
I've been around the block with this problem and don't know what else to check to compile source for gpsbabel-1.4.2. Other posts on this forum mentioning the same error with no resolution on this specifically. I have looked at the following:
1. The Makefile looks like this for the part compiling with expat options:
I have been struggling to install courier-authlib. I have tried several version from 0.55 to the latest and I keep receiving the same error.
Linking libauthvchkpw.la /usr/bin/ld: cannot find -linker collect2: ld returned 1 exit status make[2]: *** [libauthvchkpw.la] Error 1
[code]...
I have been googleing for the past week to try and resolve this with no joy. any help would be greatly appreciated. I am installing on CentOS 5.3 with config options as follows...
I am using Fedora 11 (2.6.30.10-105.2.23.fc11.i686.PAE). I got a patch for tpm_tis.c which a module to get my itpm working. And, for this I thought to customise the existing kernel and install new one.
So, I followed the foolowing steps:
In 'make menuconfig' , I have disabled Kernel debugging in the Kernel hacking section.
Then changed EXTRAVERSION to something like .test in Makefile
I'm currently using Fedora 12 with kernel 2.6.31.9 and I was trying to upgrade to 2.6.32.2. These are the steps I followed. After rebooting and choosing this kernel from the Grub menu, I'm just greeted with a black screen with a blinking cursor and it won't proceed beyond that.
These are the commands I issued. I received an error on the first make modules about the mismatch. I then ran CONFIG_DEBUG_SECTION_MISMATCH=y and once finished I ran make modules again and it completed successfully.
Code: Downloaded kernel package 2.6.32.2 from www.kernel.org untar archive make menuconfig (no changes made, saved config file) make
New to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
I update my last kernl to 2.6.38-rc7 but when I launch VirtualBox, on stdout.The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (2.6.38-rc7) or it failed to load. Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.
I am trying to compile binutils 2.15.92 package on RHEL 5.4, which is required with gcc 3.4.6 version. I have already installed gcc 3.4.6 on /opt/gcc.
I have given the --prefix as /opt/binutils during compilation. I have all flex, bison and m4 packages installed.
I am getting following error during compilation..
Code: root/binutils/binutils-2.15.92.0.2/binutils/bucomm.c:425: warning: the use of `mktemp' is dangerous, better use `mkstemp' ar.o: In function `mri_emul': ar.c:(.text+0x9f2): undefined reference to `yyparse'
These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below: acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs. My distribution is UBUNTU 10.04 LTS original kernel with the distribution is 2.6.32 My own kernel is 2.6.35
I have problem with compiling server... I finish ./configure without any problem, and now, when I write make, I see that: Quote: Makefile:360: *** missing separator. Stop. I read something, and know, that error shows when there are problem with spaces. And I should use there a tab. On line 360 I have:
Code: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/account.Po@am__quote@ I try to change this one space inside to tab, but that doesnt work for me... Terminal always show error in the same line.
I'm compiling a project that uses boost libraries (1.45.0) for a MIPS target, and when trying to compile with bjam I get the following error:
Code: libboost_system-mt.a(error_code.o): In function `(anonymous namespace)::generic_error_category::message(int) const': error_code.cpp:(.text+0x55c): undefined reference to `__glibc_strerror_r' collect2: ld returned 1 exit status
I've got a setup where I need to use 'find' to find 0 or more files in a certain directory, however, 'find' always produces an error when there are no files that match a certain check. Is it possible to run 'find' while having it omit errors when no files match the pattern?
I'm trying to install the latest Kmess from source, but when configuring it (it's really a wrapper for cmake) I get the following error: configuring KMess 2.0.6.1
fix the problems mentioned above, and run ./configure again. For example, make sure you have the KDE 4 devel packages installed.I've done this yesterday on another computer and it worked fine once I had both libgif4 and libgif-dev installed. The problem is that I've got both of those packages installed on this computer and I still get the error.
Compiling Amarok from git gives error "gdk-pixbuf/gdk-pixbuf.h: No such file or directory" it is installed in /usr/include/gtk-2.0/gdk.I just up'ed to openSuse 11.4 and KDE 4.6.1 - compiled fine last time I tried which was probably last weekend or so (March 2nd or third)Wondering if /usr/include/gtk-2.0/ is new in 11.4 because of the upcoming gtk3.0 and the problem is it's not some path and not being compiling proficient I'm a bit lost.full error
Code: /home/smiley/MyTemp/amarok/src/core-impl/collections/ipodcollection/handler/IpodHandler.cpp:35:35: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
My system is a fc 12 using a 2.6.33.1 kernel from kernel.org ... i've prefer compile by myself to get a minimal kernel ( i got a old p4 a 1,6ghz 2gb ram) but i got fedora kernels from updates too I am trying to compile a kernel from www.kernel.org, linux-2.6.33.2 full .. i made the same with 2.6.33.1 and all ok I got kernels from fedora distro (kernel-devel and kernel-headers installed) and kernel.org I dont know why about directory paths and files ... why make finds it? ... i think that linux-2.6.33.2.bz2 include all needed how to configure the install path ? ... if i am using /usr/src/kernels/linux-2.6.33.2 and all bzip2 extracted into it ... i can't see "configure" tool I am trying to compile kernel 2.6.33.2 (without problems 2.6.33.1), but i got the following message :
I am trying to compile a simple remote procedure call program. I am getting an error: /tmp/ccy0M5rT.o: In function 'main': rpchighlayer.c.text+0x5c): undefined reference to 'rnusers' collect2: ld returned 1 exit status
I have tried to compiled e2fsprogs-1.41.12 to be used on my android device that runs linux kernel. I need to compile it with -static option but building returns error First is the configure:
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code: make: *** [y.tab.c] Error 141 And that is is all, no more verbosity or anything else. Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log
