I want to install CentOS with only 250 MB Space.How can I do that?
What package can I select?I have been challenged by Manager to wants me to restrict < 250 MB for just OS installation.
I am trying to install Lubuntu on a 2GB USB drive. The (L)ubuntu installer (ubiquity) disables the "forward" button since the minimum space required is 3.6gb, although the Lubuntu installation actually is <2gb.I read somewhere this was a handset value but I haven't been able to find out how to override this?
View 1 Replies View RelatedI have 40gb of hd and I want Xp and fedora on it. I installed Xp first and now I want to install Fedora 12, every time I chose the space to iinstalll it, it says that there is no enough space to install it, although the xp just took less than 2gb of the disk. How can I resize it so that there is enough space?
View 8 Replies View RelatedI'm running Ubuntu 7.04 server on a low spec spare machine ( 500MHz, 128 RAM) but fancy a change. Basically would like a non-GUI, command line only interface, running SSH, Samba and a flavor of FTP. FTP must be set up so users only have access to their home directory and not to any other system dirs. In addition I may want to incorporate anonymous ftp login at some point. Any recommendations for both FTP and minimal server software ?
View 7 Replies View Relatedhow do i get a minimal slackware install with the kde desktop? i have this 3gig dvd iso but i don't know what to install i don't want all those bloated stuff in it any help?
View 2 Replies View RelatedLogical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
[Code]...
I have a server with centos 5, with two hd, i did a fresh installation with cenTOS using the 2 hard disk, now we need enlarge with other hard disk more, can some one explain how to enlarge the space of disk without re-install the operative system?.
View 1 Replies View Relatedi just installed Fedora 12 (via vbox 3.1.4). stupidly i started with 8G and, of course, ran out of space on the / filesystem. i added 8G to the drive which now shows as 17G.based on the below outputs, it looks like i have 8G more space available on the drive. based on reading other posts it looks like i need to use parted to increase the size but not sure how to do that.
View 7 Replies View Relatedi want to add space to my file system, i want to slice some space from my home directory coz it has a lot of space...i am just adding applications, but im runnint ofspace....what shall i do, without reformating or reinstalling my ubuntu 10.10?
View 1 Replies View RelatedContinuing on my quest to build a system with sole purpose of being a LAMP server, I am trying to have the bare minimum number of packages installed. I'm not trying to disable as many deamons as possible, but actually remove any package that is not required. It might sound a bit extreme but each package that is installed that is not needed is using valuable space on the expensive (and small) 36GB 15krpm SAS disk.
Also it is a damage control approach, in that assuming a cracker finds an exploit in Apache or PHP that allows them to run executables on the filesystem then taking away as many tools as possible will help in damage limitation. For example I don't want an SSH client installed on the system as it has no purpose for me but could be used by a cracker to access other systems on the network, if they compromise that system.
I have installed the absolute minimum from the 5.3 install by deselecting everything during install but that still leaves a great deal of unnecessary packages installed. Seeing as how the system is a 64bit installation and will have no 32bit apps running on it I have first uninstalled all the i386 versions of various libraries. I presume their only function is to provide compatibility for 32bit apps.
I have been looking for information about removing other packages but I don't seem to be able to find information on real dependancies. For example I believe I have no need for dmraid as it is for managing software RAID arrays that I have no intention using. but if I attempt to remove it the dependancies include kernel and mkinitrd. What I can't figure out though is if these are hard dependancies in that those packages will fail to work or soft ones that simply mean without dmraid it will not be possible to configure the software raid module that is loaded into the kernel.
What packages would people recommend to remove, anyone seen a good guide to reducing down CentOS/RHEL to the absolute minimum ? python-elementtree-1.2.6 : Is this really required by YUM ? m2crypto-0.16 x86_64 : Is this really used by YUM, I didn't think YUM connected via SSL ?
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedI have millions of small chunks of new's and delete's in my program. Even though no memory leak is detected through valgrind or purify, memory grows. But the growth is degrading over the number of times of the execution of the tasks. Can i think that fragmentation plays a role in this?
View 6 Replies View RelatedI have installed the debian lenny base system in my old pc. I want only a minimal system with a small window manager like icewm and firefox to surf the web. What I need to write now in text mode to install this minimal system?
View 9 Replies View RelatedI am running du -h --max-depth=1 and it is hanging, presumably processing a large folder.
Could you give me a list of the large folders in the Redhat OS?
Is there any way to check if du has failed or is hanging/processing a folder?
How long should du -h --max-depth=1 take on 40GB of data?
Solved, it was taking a long time on a 29gb /var/log folder
I am trying to install Oracle ebs and it falls over with this message:-
Code:
File Space Check :
-- database node space checks --
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = /d01/oracle/VIS/db/tech_st/11.1.0
required = 9967.0
actual = 9898.0390625
[code]....
We have recently built some RAC (OS:RHEL55) servers and after the Oracle guys have installed their application, somehow the directory / is using the maximum space. I contacted the Oracle team & they say that their RAC installation doesn't create any files in the / directory. This is the o/p of '/' directory file system:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/datavg-vol2 498M 382M 62M 88% /
Also, when I checked the file sizes, I found that the following files were taking more space:
/etc/selinux/targeted/modules/active/
-rw------ 1 root root 17M Nov1 base.linked
[code].....
I don't know what these files are doing there, when I did a cat and cheked, I found the files containing this data:
nf_tre--
stem_dbusd_var_run_t...and some stuff like this Unable to decide whether or not to remove these files. Also, is there any way to find out what files are taking more space and whether they can be deleted or not? in order to free up some space in the / direcoty. As there are 10 RACs that we've build, I got to do something to fix this for all of the 10 servers.
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
In System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
I am running Debian testing with KDE via KVM.
I love GNOME to pieces but I also enjoy KDE, and I decided to try Debian with KDE. It was a positive experience but a pain in the rear to set up. I installed KDE, and then had to manually remove most GTK packages, as I had installed KDE-full and was overloaded with KDE and GNOME apps.
I would like to do a minimal, CLI-only installation of Debian testing and then install KDE. My machine accesses internet via wireless, which I read the Debian installer does not support. I'm assuming I will have to go with a netinstall...?
Furthermore, once I attain this CLI-only environment, how difficult will it be to get my hands on KDE? A simple apt-get install kde-full ?
I use CentOS as a host for VMWare virtual machines. I like the CentOS install to be as minimal as possible. However, if I try to remove stuff I don't want at the install stage, the install invariably crashes. So I just accept the defaults, and it works fine.
So I would like to know the best way to get rid all the stuff I don't want (which is pretty well everything except Gnome, vi, samba and an email reader).
Recently I tried to install Debian 8.3 from *netinst.iso as a VM on VmWare Worksation 12. I try this in my office where there is a windows proxy set, for some security measures. During the installation in order to download updated and install additional packages I need to choose a mirror and then a proxy. I try to set the proxy but all I receive was an error. Decide to continue with the minimal installation and when the system start just to enter the proxy in etc/profile the reboot and I was thinking that everything will work just fine and I will be able to install everything I need. When I try apt-get install I receive a message Ign cdrom:// Debian ... Then to remove that error I edit /etc/apt/source.list but even then nothing happened when I try to use apt-get install. I receive and error message "Unable to locate the package.
View 5 Replies View RelatedI would like to know if there is a way to install Ubuntu 8.04 with a minimal configuration. Just the desktop and the important programs needed to run/update ubuntu. I'm asking this for my current problem found in this thread URL... hasn't been solved yet, and if the said problem doesn't get solved I would have to downgrade to 8.04 for this is the only version of ubuntu that works with the monitor described in the linked thread. Also, I would like to know if there is a way of installing fonts in 8.04 as easy as adding fonts to 10.04?
View 2 Replies View RelatedA few days ago I tried to install Ubuntu 11.04 minimal CD 64 bit PC (amd64, x86_64), from [URL], but couldn't. The reason is that none of the Ubuntu mirrors were accepted. I don't know if the problem is that the laptop isn't 64-bit, I'll list the specs, or what and I don't want to burned another disk without advice on what to do.
The laptop's specs are:
Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (2 CPUs), ~1.8GHz
Operating System: Windows Vista Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.101014-0432)
System Model: HP Pavilion dv6500 Notebook PC
BIOS: PhoenixBIOS 4.0 Release 6.1
I basically just want to be able to run XFree86 on one of my clients and have networking support. Does anyone know what packages I need to add in my ks.cfg to meet this requirement?
View 4 Replies View RelatedI have recently acquired a micro-sized-PC (A Dell FX130) which comes with a VIA C7 processor, 1GB RAM and 1GB onboard flash. The only application I need is a web-browser, I will use the FX130 to access a (very limited) number of web applications and to download/print-html-to-PDF - putting files onto a USB thumb-drive. I want to encrypt the disk to guard against tampering, and to run a restrictive firewall.
When I try to install the i386 debian-7.7.0 image - I run into the snag that it won't let me use guided configuration for the 1GB flash drive... and - when I guess at a sensible partitioning... I find that I run out of space during the standard installs. I note, however, that a whole bunch of significant applications (which I don't need) are being installed.
I am sure I'm missing something - is there an easy way to do a "minimal" GUI install that would make it easy to fit (just) a web browser (Chrome - ideally) and dependencies onto a 1GB bootable flash drive in a 'Debian-standard' fashion?
I want to install two Linux in my P.C. two partitions mounted to /(one for linux1 e one for linux 2). one partitions mounted to /home (for linux 1 e linux 2 the same time). Two partitions mounted to swap (one for linux1 e one for linux 2). One partitions for BackUP (with the size of 20gb). I have an HD of 80gb. My memory is 256mb. I want to know: The minimal size of swap. (i think that 300mb is enough) the minimum size of partitions mounted in / (will install a lot of programs in both). If i encrypt one partition, what is the difference? I can install two Desktops in the same O.S? I want to install minimum requirements, these programs that come in KDE or Gnome desktop, i don't wanna install they, i can remove from instalation from DVD? I can install Gnome and KDE in the Same time, from the instalation from DVD?
View 4 Replies View RelatedIs it possible to install the opensuse minimal using gnome/kde live cd or the DVD or with the netinstall?
View 8 Replies View RelatedI've been playing with Ubuntu for severla years, although I've been a casual user, always just installing from the live disc. I'm comfortable with apt-get, and not scared to format, reformat, get angry, calm down, reinstall, etc.
I'd like to upgrade my Dell Mini 9 netbook wti 9.10. one of my problems with 9.04 is space. with the standard install I'm using 3.7 of my 4 Gb of HD and want to try and streamline that. I've starting have problems upgrading my apps because of space to downlod the upgrade to.
I plan on formating and starting from scratch with the minimal CD (transfered to USB), but I want a clear recipe of steps.
Main goals:
- Standard gnome interface (not remix)
- Open office writer, calc, and impress
- Chromium
I know once I get started to type "cli" to install the basics, but then what? Many of the guides I've seen online are several years old. I can handle chromium and Open Office once I'm all up and running, but I don't want to install and then uninstall firefox, gimp, etc.
So I go to install the Minimal Ubuntu edition and get to the ethernet driver selection part and it can't figure out what driver I have (Odd since Ubuntu regular can).
View 8 Replies View Related